- Trusted Seller

Laguna DB12|6 Belt/Disc Sander
- Manufacturer: Laguna
Laguna’s DB12|6 Sander is a multi-purpose machine that gives you two sanding surfaces. THIS MACHINE SOLD EXCLUSIVELY THROUGH OUR DEALER NETWORK Features: Belt Table Tilt: 45° Down, 25° Up Platen Tilt: 0° – 90° Di...
$1,099 USDKingston, TN - Trusted Seller

Laguna MW37C Metal Wide Belt Sander
- Manufacturer: Laguna
Offering metal deburring, sanding, and texturing, the Compact Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 10 HP motor (Single Phase), 37″ machine width, and elec...

Larick 260 Profile Sander
- Manufacturer: Larick
The LARICK 260 Series Profile Sander is a horizontal spindle machine designed for use with flexible brush type sanding wheels. The base machine has 40mm diameter spindles extending 175mm on both sides. 50mm diame...
Dundee, NY
Larick 360 Profile Sander
- Manufacturer: Larick
In order to optimize profile sanding, most profiles should have the wheel tilted to minimize the depth the profile goes into the wheel, and to keep the abrasive as flat as possible on the wheel. Larick’s family o...
Dundee, NY- Trusted Seller

Laguna SuperMax? 13? Combination Brush/Drum Sander
- Manufacturer: Laguna
The 13″ Combination Brush/Drum is the answer to your production bottleneck. Developed with moldings in mind, this versatile sander can tackle every step in your finishing process, from sanding raw wood to sanding...
$4,949 USDKingston, TN - Trusted Seller

Laguna MW25C Metal Wide Belt Sander
- Manufacturer: Lagun
Offering metal deburring, sanding, and texturing, the Compact Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 7.5HP motor (Single Phase), 25″ machine width, and elec...
- Trusted Seller

Ritter R901 Horizontal Edge Belt Sander
- Manufacturer: Ritter
3 HP Abrasive Belt Drive Motor, TEFC 6″ X 132″ Abrasive Belt Size (2) 6″ X 49″ Ground Steel Platens (2) Bias Tilting 12″ X 65″ Worktables End Sanding Unit with 3″ X 3″ Drum (2) 4″ Diameter Dust Hoods Wired 1-Phas...
- Trusted Seller

Ritter R921 Horizontal Edge Belt Sander
- Manufacturer: Ritter
3 HP Abrasive Belt Drive Motor, TEFC 6″ X 132″ Abrasive Belt Size 6″ X 49″ Ground Steel Platen (1) Bias Tilting 12″ X 65″ Worktable (2) 4″ Diameter Dust Hoods Wired 1-Phase 240 Volt, 60 Hz (3-Phase Option R923) D...

Larick 150 Profile Sander
- Manufacturer: Larick
This basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and workpieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable s...
Dundee, NY- Trusted Seller

Laguna SuperMax? 19-38 Combination Brush/Drum Sander
- Manufacturer: Laguna
Simplify sanding with a 19-38 Combination Brush/Drum Sander! Our exclusive technology allows you to drum sand and profile sand on the same machine! Interchangeable drum and brush heads allows for unlimited applic...
$3,499 USDKingston, TN 
Laguna, SS|14 Spindle Sander
- Manufacturer: Laguna
Laguna’s SS|14 Spindle Sander is a versatile sander that comes standard with a stand, 4 inserts, and 6 spindles, including a 3” diameter bonus spindle. Features: Motor: 1/2 HP, 110 V, 7.5 amp RPM: 1,725 Oscil...
Dundee, NY- Trusted Seller

Ritter R25814 14″ Tall Oscillating Edge Sander
- Manufacturer: Ritter
Ritter bills this as a CR25814 DRAWER BOX SANDER…….the reality is that it has 16″ X 56″ platens not only makes it a drawer box sander, it makes it a tall flexible sander that also oscillates. 10 HP Abrasive Belt ...
- Trusted Seller

Oliver 6″ x 89″ Non-Oscillating Edge Sander – 6305
Can be used with the belt in the horizontal or vertical position or any angle in between. Precision ground steel platen is graphite covered to reduce heat. Cast iron table is vertically adjustable allowing full u...
Kingston, TN 
6x48" Benchtop Edge Sander
Model Number: 6301 3/4Hp 1Ph 115V Features: Can be used with the belt in the horizontal or vertical position or any angle in between. Precision ground steel platen is graphite covered to reduce friction and heat....
$980 USDCharlotte, NC- Trusted Seller

Laguna MW37 Pro Metal Wide Belt Sander
- Manufacturer: Lagun
Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 20HP motor, 37″ wide work table, and an auto-height adjustm...

