New Sensors in Lombardy, Italy

GYSE-Q Tecnosens
- Manufacturer: Tecnosens
Incremental output (A/B), min. resolution 1 µm m. The working principle is based on a sampling detection method, in which the pulse frequency is set at 250 kHz (standard).
Brescia, Italy
GYSE-S-PF Tecnosens
- Manufacturer: Tecnosens
Min. resolution 1µm, SSI output, removable probe.
Brescia, Italy
GYSE-P-PF Tecnosens
- Manufacturer: Tecnosens
Profibus interface. Parameters (resolution, output) can be set via profibus. Min. resolution 1µm, Profibus DP interface, removable probe, maximum magnets : 32 Pcs.
Brescia, Italy
250SR16M Tecnosens
- Manufacturer: Tecnosens
The 250ST/R160 transducer pair is suitable for low-cost applications where the minimum measurable distance is a key parameter or otherwise for simple systems for detecting the passage of people or objects. Fea...
Brescia, Italy
250ET250 Tecnosens
- Manufacturer: Tecnosens
The 250ET/R250 transducer pair is suitable for low-cost outdoor applications where the minimum measurable distance is a key parameter or otherwise for simple detection systems of the passage of people or objects....
Brescia, Italy
235SR130 Tecnosens
- Manufacturer: Tecnosens
Piezoceramic type ultrasonic transducer, transceiver, watertight case, typical driving frequency 235KHz, diameter 13mm Features Working environment: indoor/outdoor Configuration: transceiver Working frequency: 23...
Brescia, Italy
300HE100 Tecnosens
- Manufacturer: Tecnosens
Piezoceramic type ultrasonic transducer, typical driving frequency 300KHz, diameter 9mm. Features Working temperature: -20°C to +70°C Storage temperature: -30°C to +70°C Working humidity: 15 to 90% RH Storage hum...
Brescia, Italy
KB1581 Tecnosens
- Manufacturer: Tecnosens
KB1581 consists of an infrared LED and a Light-Modulation Photo IC. Features: Light-modulation type. Low Cost. Dust Proof. Distance between emitter and receiver can be up to max 700mm. Applications: Object detect...
Brescia, Italy
KB1281 Tecnosens
- Manufacturer: Tecnosens
Photo switch KB1281 consists of an infrared LED and a Photo IC. Its main features are: - The distance between emitter and detector can be set to a maximum of 400 mm; - Resistant to noise caused by ambient light; ...
Brescia, Italy
KB1284 Tecnosens
- Manufacturer: Tecnosens
KB1284 photoswitch consists of an infrared LED and a phototransistor. Its main feature is: - The distance between emitter and detector can be set from 1 to 100mm; This photo-switch is recommended for applications...
Brescia, Italy
FCX-MVL-F Tecnosens
- Manufacturer: Tecnosens
The board allows measurement of O2 concentration in the range of 0.1-25% . Zirconium oxide technology avoids calibration procedures and allows for particularly long life. It is a board suitable for measurement in...
Brescia, Italy
KP1663 Tecnosens
- Manufacturer: Tecnosens
Model KP1663 is a prism photo switch with an infrared LED and a Photo transistor. Feature: Snap-in connector installation. High resolution of object position. Available for banknote/dark paper detection. Distance...
Brescia, Italy
C3H8-CD300 Tecnosens
- Manufacturer: Tecnosens
Board with transmitter and Propane NDIR sensor (C3H8)
Brescia, Italy
HCPV201W-11 Tecnosens
- Manufacturer: Tecnosens
HCPV-200 is an accurate and reliable humidity measurement sensor module based on HumiChip. The humidity output of the sensor is temperature compensated and is in linear voltage that can be interfaced directly wit...
Brescia, Italy
HCPV200W-10 Tecnosens
- Manufacturer: Tecnosens
HCPV-200 is an accurate and reliable humidity measurement sensor module based on HumiChip. The humidity output of the sensor is temperature compensated and is in linear voltage that can be interfaced directly wit...
Brescia, Italy