Used Pagus Machine Tools

Trusted Seller
PAGUS adapter sleeve set for grinding spindles
- Manufacturer: Pagus
Adapter sleeve set for grinding spindles PAGUS 1 x outer diameter: Ø 100 mm, inner diameter: Ø 50 mm, length: 215 mm 1 x outer diameter: Ø 100 mm, inner diameter: Ø 60 mm, length: 215 mm 1 x outer diameter: Ø 100...
$213 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outer Ø: 200mm Flange: 155 mm | Bolt circle: 174 mm | Height with jaws: 100 mm | Bore: 55 mm | Square for key: 11.5 mm | Dimensions: 200 x 100 mm
$213 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS with second set of jaws ! used, tested !
$1,482 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-Jaw Chuck, Three-Jaw Chuck with External Jaws PAGUS Short Taper with 3 Additional External Jaws with Wrench Used, Tested!
$308 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Outside ø: 250 mm | Bolt circle ø (chuck): 230 mm | Bore ø: 80 mm | Height with jaws: 140 mm | Dimensions: 250 x 250 x 140 mm
$213 USD
Zschepplin, Germany
Trusted Seller
PAGUS lathe chuck
- Manufacturer: Pagus
3-jaw chuck, three-jaw chuck PAGUS Was used on a Toyoda HES52 with many accessories ! used, checked !
$806 USD
Zschepplin, Germany
Trusted Seller
PAGUS tube bending machine
- Manufacturer: Pagus
Tube bending machine, with base frame PAGUS ROKABI ( tube bending machine ) motor: VEM ZG1 KMR71 G 4 0,75 kW 63 rpm 220 / 380 V 3AC 50 Hz IP44 with various accessories used, tested !
$771 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS Bore Ø: 61 /70 mm, with thread, pitch: 6.0 mm used, checked!
$261 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Face plate, clamping plate PAGUS 4x threaded hole: M16 x 2.0, depth: 30 mm used, checked!
$498 USD
Zschepplin, Germany
Trusted Seller
PAGUS faceplate
- Manufacturer: Pagus
Faceplate PAGUS / WMW 4x threaded hole: M12 x 1.75, depth: 25 mm 1x bore: Ø 19 mm, depth: 8 mm Cone: Ø 103 /106 mm, depth: 15 mm used, checked!
$451 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS Outer ø: 305 mm | Bolt circle ø: 280 mm | Bolt circle flange ø: 135 mm | Bore ø: 35 mm | Thickness: 50 mm | Grooves: 14/24 mm | Dimensions: 305 x 305 x 50 mm
$261 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS Short cone Outside ø: 400 mm | Flange: 155 mm | Bolt circle: 134 mm | Bore ø: 110 mm | Height with jaws: 140 mm | Total height: 190 mm | Dimensions: 400 x 200 mm
$379 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
Faceplate Pagus used, tested ! External ø: 700 mm | Hole circle ø: 150 mm | Bore ø: 95 mm | Flange ø: 195 mm | Dimensions: 700 x 700 x 113 mm
$1,138 USD
Zschepplin, Germany
Trusted Seller
PAGUS face plate
- Manufacturer: Pagus
faceplate PAGUS with reversible jaws! Used! Outer ø: 400 mm | Bolt circle ø: 132.5 mm | Height with jaws: 155 mm | Bore ø: 100 mm | Groove width: 18/32 mm | Groove depth: 30 mm | Dimensions: 400 x 400 x 220 mm
$569 USD
Zschepplin, Germany
Trusted Seller
PAGUS center point
- Manufacturer: Pagus
Center point, lathe point, center point, live PAGUS MK5 Thread: diameter: Ø 55 mm, pitch: 3.5 mm, length: 20 mm used, checked!
$178 USD
Zschepplin, Germany