Used Blenders in Texas, USA

Trusted Seller
MJK1283 Double Trough Paddle Blender
1- Double Trough Paddle Blender 5 ¼” opening Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience. Load Out: Skidding:
Fort Worth, TX
Trusted Seller
2019 NRG Blender
- Manufacturer: NRG Blender
TWIN CAT C18 DIESEL ENGINES, CAT CX35-P800 TRANSMISSION, MTD ON NRG T/A TRAILER HOURS, HYD-9212 / DISCHARGE-9067
Fort Worth, TX
Trusted Seller
Trailer Mounted Frac Blender
Trailer Mounted Blender - Ready to work and can be tested prior to purchase - 14L 630HP - Rebuilt Gearbox - Ready to Work! - Can be Tested Prior to Purchase - VIN: 5DDKM362351001938 - (2) Detroit Series 60 Diese...
$120,000 USD
Fort Worth, TX
Trusted Seller
B&P LittleFord LLC-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Falk
B&P LITTLEFORD LLC-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DRIVE: D...
Houston, TX
Trusted Seller
AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Falk
AMERICAN PROCESS SYSTEMS-PLOW BLENDER/MIXER Two choppers, no nameplate, no jacket, center outlet bottom nozzle, connected to an electric motor (no nameplate) and a Falk gear box, input speed, output speed GEAR DR...
Houston, TX
Trusted Seller
2005 Trailer Mounted Frac Blender
2005 Frac Blender • Model: Trailer-mounted frac blender unit for oilfield operations • Engine: Powered by a Detroit Diesel engine for reliable performance • Blending Capacity: Capable of mixing fracturing slur...
$25,000 USD
Fort Worth, TX
Trusted Seller
BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER WITH GEAR DRIVE AND MOTOR
- Manufacturer: Babcock Gardner
BABCOCK GARDNER LTD.-PLOW BLENDER/MIXER No jacket, center outlet bottom nozzle, control panel included DIMENSIONS: CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change a...
Houston, TX
Trusted Seller
Stainless Steel Thermal Blender Kettle 40"x27" with Stainless Steel Mixer Blade Process Engineering Equipment
“In excellent condition.” Includes Stainless Steel Blade Simmons Controller Master Gear Motor 238778 Serial: DR 19836; Frame: 204SP; RPM 1725 208-220-460/60/3 48"x39"x76" Approx. 146 gallons Room 5 Unit 992
$28,000 USD
Chico, TX
Trusted Seller
(3) 125bbl Blenders
(3) 125bbl Blenders 10k - 20k Hours Manufactured in 2012
$150,000 USD
West, TX
Trusted Seller
SKYFOOD EQUIPMENT LLC-Skymsen Blender
- Manufacturer: Skyfood
SKYFOOD EQUIPMENT LLC MOTOR WEG CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. Shipping dates are only approximate and contingent up...
Houston, TX
BLENDERS 101191
- Manufacturer: PAUL ABBE
10 CUBIC FOOT DOUBLE CONE MIXER; 1HP; 1725 RPM; Qty: 1 | Alloy: S | Cubic feet: 10 | Material: 304SS | Dia.(ft'in"): 3'0" | Length (ft'in"): 1'4" | Hp: 1 | Driver type: MOTOR | V/h: V | Jacketed y/n: N
Cleveland, TX
BLENDERS 107281
- Manufacturer: GAULD
TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 8' LONG TROUGH; PADDLE RPM 61;
Cleveland, TX
BLENDERS 89935
- Manufacturer: VRIECO NAUTA
APAP BLENDER; 543 CU. FT. WORKING CAPACITY; 856 CU. FT. TOTAL CAPACITY; VRIECO NAUTA ORBITAL SCREW MIXER; 15 PSIG @ 275 DEG. F. INTERNAL + INTERNAL SEALS @ 9 PSIA; 275 DEG. F.; INTERNAL FINISH: 180 GRIT, ALL WE...
Cleveland, TX
BLENDERS 108046
- Manufacturer: J.H.DAY
NAUTA MIXER; 304SS SHELL; 304SS (DIMPLE TYPE) JACKET; SHELL 15 PSI @ 338 DEG. F.; JACKET 100 PSI @ 338 DEG. F.;
Cleveland, TX
BLENDERS 89966
- Manufacturer: PAUL ABBE
MFG. BY PAUL ABBE; 108 TOTAL CUBIC FEET; 60 WORKING CUBIC FEED;
Cleveland, TX