Used Extruders

Trusted Seller
2000 Davis-Standard/Sterling Extruder with Gear Boxes
- used
- Manufacturer: Davis-Standard
2000 Davis-Standard/Sterling Extruder with Gear Boxes (2) available Screw diameter- 6” L:D ratio- 28:1 Includes heater bands Motor not included Gear box gear ratio- 24.29 Gear box model number- 60IN60 Condition- ...
Harvey, LA
Trusted Seller
Welex Model HS 3.0 40D SV Extruder
- used
- Manufacturer: Welex
Welex Model HS 3.0 40D SV Extruder Year of manufacture- 2009 Type- vented/plugged, high speed, single screw Serial number- 8454 Extruder diameter- 3″ L/D ratio- 40/1 Motor- A.C.- 412 Kw/550 horse power (direct dr...
Harvey, LA
Trusted Seller
1985 ALFONS MALL AT Impact Extrusion Trimmer
- used
- Manufacturer: ALFONS MALL
Manufacture - Mall - Model AT - New 1985 Cans/Tubes Per Minute - 90 Can/Tube Size: - Diameter - 13.5-28.0mm current use (design allows 38mm max) - Length - 100-190mm MORE DETAIL COMING
Banner Elk, NC
Trusted Seller
1977 FIELDING & PLATT 1600mton Aluminum Extrusion Line
- used
- Manufacturer: FIELDING & PLATT
Manufacture: - Fielding & Platt - New 1977 - Decommissioned 2013 in good running condition Scope - Press - complete and proper, installed and included - Press control cabinets installed and included - Billet hea...
Banner Elk, NC
Trusted Seller
Welex 350
- used
- Manufacturer: Welex
3.5" Used Extruder Used Welex 350 Used Plastic Extrusion Machinery for sale. This pre-owned machine is available all over the US
Sterling, MA
Trusted Seller
POLYCOOL XCHANGER INC. 4.5"
- used
- Manufacturer: XChanger
Used Polycool previously used on 4.5" blown film line. Separately available is 20 HP AC motor with inverter, previously used with above.
Hainesport, NJ
Trusted Seller
ALLIED DIES, INC. 20"
- used
- Manufacturer: Allied
Used 20" Allied Dies Inc dual manifold sheet die. With 2" back center fed main entrance. 240 volts, 1PH, 9 zones. 3" X 0" naked edge, .060" lip opening. Last used for PVC siding. Rebuilt by Allied Dies Inc in Apr...
Hainesport, NJ
Trusted Seller
RUBBER ROLE 60" WIDE X 8" DIA.
- used
- Manufacturer: RUBBER ROLE
Used 55" wide X 8" diameter rubber roll previously used as pull roll on sheet extrusion line.
Hainesport, NJ
Trusted Seller
NEW YORK 208
- used
- Manufacturer: NEW YORK
Used New York Blower (3) model 208 aluminum pressure blowers, each with 10 HP. Includes polycool unit.
Hainesport, NJ
Trusted Seller
1998 FUTURE DESIGN, INC. DSS1816IBC
- used
- Manufacturer: FUTURE DESIGN, INC.
Used 16" Future Design blown film die. Model #DSS1816IBC, new 1998. 0.050 die gap. Die is mounted on fixed cart. Has a manual screen changer and IBC. Serial #F984673.
Hainesport, NJ
Trusted Seller
EDI 21"
- used
- Manufacturer: EDI
Used 21" wide EDI Autoflex VI H75 sheet extrusion die. Serial #09-279-29. New 2009. Has bottom feed for down extrusion, external deckles.
Hainesport, NJ
Trusted Seller
DUAL LIP AIR RING 12" DIA.
- used
- Manufacturer: DUAL LIP AIR RING
Used 12" diameter dual lip air ring, 20 HP air ring blower, and Polycool.
Hainesport, NJ
Trusted Seller
EXTRUSION SHEET DIE 16" wide
- used
- Manufacturer: EXTRUSION SHEET DIE
Used 16" wide adjustable lift sheet/coating die. Non flex lip control but is adjustable lip. Has back center feed. Previously used on extrusion coating line.
Hainesport, NJ
Trusted Seller
EDI Autoflex R75
- used
- Manufacturer: EDI
Used 60" EDI Autoflex R75 sheet die. Has 45 degree restrictor bar and removable lower lip. Center back feed. Serial #89-30122. No control for auto flex included.
Hainesport, NJ
Trusted Seller
ALLIED DIES, INC. AHM-100
- used
- Manufacturer: Allied
72" wide Allied "Duraflow" AHM-100 flex lip sheet extrusion die. Job #AD2763. Lip opening .001"-.100" opening. Has back center feed, 4" W X 1.753" H.
Hainesport, NJ