- Trusted Seller
2017 Mechatherm Tilting Rotary Furnace
used
- Manufacturer: Mechatherm
Manufacture: - Mechatherm (in conjunction with Altek) - New 2017 Holding Size / Capacity: - Liquid Aluminum Capacity = 16 mtons (35,000 lbs) + 2.4 mtons salt - Liquid Aluminum below Freeboard = 8.8 cubic meters ...
Banner Elk, NC - Trusted Seller
2008 GAUTSCHI (NA) TILTING ROTARY MELTING FURNACE
used
- Manufacturer: Gautschi
22,000 lb Tilting Rotary Furnace: MC-389 - BARREL NEVER LINED OR OPERATED! - INCOMPLETE FURNACE: NO DOOR, NO FRAME/BASE, NO TRUNNION, ETC. - OFF FOUNDATION, READY TO SHIP, LOADED ON YOUR TRUCKS FOR FREE Manufac...
Banner Elk, NC - Trusted Seller
2009 Ria Aluminum Profile Extrusion Log Homogenizing Furnace
used
- Manufacturer: Ria
Manufacture - RiA, new 2009 - Status = on foundation, in operation (April 2024) Data - Annual production = 50,000 mtons (mixed) - Furnace charge = 25 mtons max - Furnace performance per hour = 6-7 mtons/hr of 1...
Banner Elk, NC - Trusted Seller
2024 MANSELL & ASSOCIATES Unit 50
new
- Manufacturer: MANSELL & ASSOCIATES
Manufacture: - Mansell & Associates (USA) - NEW Dec 2024, never used Molten Metal Holding Capacity: Aluminum = 7,000 lbs (50 cubic feet x 140lbs per cubic foot for aluminum) Lead = 35,000 lbs. Condition - Brand...
Banner Elk, NC 
UEI 520KIT Furnace Install Kit
new
- Manufacturer: UEi
The 520KIT offers a start-up solution for furnace heating installation by providing specific test instruments needed to confirm required setup, grouped by specific equipment type and packaged in a rugged tool bac...
$646 USDWilmington, NC
Gibsonville, NC
Fluke 3150-2 Multi-Hole Insert for the Fluke 9150 Dry Furnace
new
- Manufacturer: Fluke
Fluke 3150-2 Multi-Hole Insert for the Fluke 9150 Dry Furnace
$1,510 USDWilmington, NC
Fluke 3150-3 Multi-Hole Dry Block Furnace Inserts, 3/16 to 3/8"
new
- Manufacturer: Fluke
Fluke 3150-3 Multi-Hole Dry Block Furnace Inserts, 3/16 to 3/8"
$1,510 USDWilmington, NC
Check Point Smart-1 625 Appliance
new
Click here to jump to more pricing! Check Point Smart-1 security management appliances consolidate security management in an all-in-one, single scalable appliance for full threat visibility and control across you...
Cary, NC
Fluke 3150-4 Multi-Hole Dry Block Furnace Inserts, 6 x 1/4"
new
- Manufacturer: Fluke
Fluke 3150-4 Multi-Hole Dry Block Furnace Inserts, 6 x 1/4"
$1,510 USDWilmington, NCHeat Pro Cabinet, Heat Trick/Test , Heat Oven
used
- Manufacturer: Clay Moretz Electrical Corporation
Heat pro cabinet located in Sanford, North Carolina
$3,000 USDSanford, NC
THERMOLYNE 47900 P/N F47928 FURNACE
used
- Manufacturer: Barnstead/Thermolyne
Tested to see if powers on only. Mpn: F47928
$299 USDRutherfordton, NC- Trusted Seller
IHI ABAR ISPEN VACUUM BELT FURNACE
used
- Manufacturer: IHI
OPENING: W 29 IN X H 11 IN BELT: W 30 IN X H 34 IN X L 27 FT
- Trusted Seller
SURFACE COMBUSTION SUPER ALLCASE CARBURIZING FURNACE
used
- Manufacturer: Surface Combustion
24” X 36” X 24” LOAD SIZE. TEMPERATURE RANGES - 1400 F TO 1800 F MAX FUEL DEMAND: 1500 CFH FUEL BTU PER UNIT: 1000 FUEL PRESSURE: 2 PSI MAX POWER REQUIRED: 54 KW INPUT POWER: 460 V / 3 PH / 60 HZ
- Trusted Seller
2006 GASBARRE 24E-7Z SINTERING BELT FURNACE
used
- Manufacturer: GASBARRE
SINTERING FURNACE 24""#6 SS PH/CERAMIC HH - 7 ZONES FURNACE OPENING: W/24, H/7 TEMPERATURE RANGE: 0 F - 2200 F 480 V / 3 PH / 60 HZ / 700 A
Tip: Enter manufacturer, model or keyword
