- Trusted Seller
Cumberland 37H Granulator
used
- Manufacturer: Cumberland
- Model: 37H
Cumberland Granulator Model: 37H 150 HP New Soft Start Comes with Screens and Fly/Stationary Blades
40 HP CUMBERLAND / WHITAKER GRANULATOR, MODEL 3KN – 1620
used
- Manufacturer: Cumberland
ITEM 1993: 40 HP CUMBERLAND / WHITAKER GRANULATOR, MODEL 3KN – 1620 SERIAL # CA083000-06039 BUILT IN 2007 MOTOR: 230/460 VOLTS 90.5/45.2 AMPS 3 PH 60 HZ 1765 RPM INCLUDES INSTALLED 1” SCREEN OPEN ROTOR DESIGN INC...
L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC. Granulator Grinder – Model 12336
used
- Manufacturer: L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC
ITEM 1101: GRANULATOR GRINDER L-R SYSTEMS LAS ITS-ROHLINE SERVICE INC. Model Number 12336. Serial Number D16087
$4,120 USDGreensboro, NC- Trusted Seller
Used Aeromatic S-6 Fluid Bed Spray Granulator
used
- Manufacturer: Aeromatic
Used Aeromatic model S-6 200 KG sanitary 316 stainless steel fluid bed spray granulator. Unit is electro-polished and manually operated. Has (2) product containers equipped with 80 mesh top screen and 325 mesh bo...
Wilmington, NC 
WEIMA Low Speed Grinder – 75 HP
used
- Manufacturer: Weima
WEIMA Grinder - 2004 Model WLK 13/75 Low Speed, Hopper Style Grinder. Batch style grinder with 75 HP low speed rotor, top feed hopper, self contained hydraulic system with hydraulic ram, and controls. Controls op...
High Point, NC
2021 AEC FX1012
used
- Manufacturer: AEC
- Conveyor feed hopper - 3 blade, tangential cutting chamber AL4 blower/cyclone combo - ¼” screen - 1HP blower starter - 3” blower discharge
Gibsonville, NC
2018 AEC GP1018
used
- Manufacturer: AEC
- Model: GP1018
- 3 Blade open rotor - 5/16 Screen - Single Flywheel - Full machine sound enclosure - Airveyor discharge with 4" outlet Offset chamber design (standard design)
Gibsonville, NC
Conair CW-1824
used
- Manufacturer: Conair
- Model: CW-1824
- 3/8" Screen - Tangential Cutting Chamber - Electric Hopper Tilt
Gibsonville, NC
2015 AEC GP810
used
- Manufacturer: AEC
- Hand feed hopper - 3 blade rotor - 1/4" screen AL4 Blower and Cyclone - 1 HP Blower - 3" blower discharge
Gibsonville, NC
2022 Zerma GSL180/300
used
- Manufacturer: Zerma
Voltage: 230V or 460V | Horsepower: 5.5hp | Cutting chamber size: 10.5" x 13" | Rotor diameter: 7” | Rotor width: 12” | Number of rotor knives: 30 | Number of stator knives: 2 | Drive capacity: 5.5hp | Screen si...
Gibsonville, NC
Tip: Enter manufacturer, model or keyword