DIGIWEIGH 5,000 LB CAPACITY FLOOR 18555
used
- Manufacturer: Digiweigh
Digiweigh digital floor scale. S/N 8590211080046. Model DWP-5000F. 5,000 lbs. capacity.
Elk Grove Village, IL
PREMIER PNEUMATICS 8″ 1 HP 18068
used
- Manufacturer: Premier
One (1) used Premier Pneumatics model HDRFS1110-8NHRTT3 heavy duty rotary air lock. S/N 5089-1291. 8″ x 8″ entrance. Carbon steel construction. Chain and sprocket driven by a 1 HP 208-230/460-volt motor through a...
Elk Grove Village, IL
SMOOT 14″ AIRLOCK 18081
used
One (1) used Smoot portable rotary valve with blow through. Nominal 14” x 14” entrance with hopper and safety grate. 1 HP motor. 45 RPM maximum. With motor, starter, and cart. Very clean.
Elk Grove Village, IL
CONAIR AR10 VACUUM RECEIVER 17429
used
- Manufacturer: Conair
Conair model AR10 vacuum receiver, S/N 249414, 24-Volts, 2-1/4″ OD inlet, One cubic foot volume capacity, 45 degree gravity flapper outlet, #20 mesh stainless steel filter screen.
Elk Grove Village, IL
YOUNG 6INHC AIRLOCK / DIVERTER 17428
used
- Manufacturer: Young
Young model 6INHC 6″ airlock / diverter combination unit, .5 HP 1750 RPM motor driving 25:1 ratio gearbox on airlock for a 70 RPM speed, 6″ ID inlet with 11″ OD flanged mount, diverter with two 6″ ID outlets
Elk Grove Village, IL
CONAIR/GATTO HS-2-4 PROFILE SAW 4715
used
- Manufacturer: Conair
CONAIR/GATTO MODEL HS-2-4 PROFILE SAW, 2 HP 480 VOLTS 3 PHASE, 10″ HIGH SPEED STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0 – 2 3/8″ OR UP TO PROFILES 2″ X 4″ WIDE, 10″ TABLE TRAVEL, DIMENSIONS ARE 43 3/4″...
Elk Grove Village, IL
YOUNG INDUSTRIES 6-IN 6″ AIRLOCK 14295
used
- Manufacturer: Young Industries
Young Industries model 6-IN airlock, S/N HG-8687, powered by a 1/2 HP 1780 RPM motor directly driving the gearbox chain sprocket steel vanes, square bolt on flange mount
Elk Grove Village, IL
TRIA TRAINO D210 FEED ROLLS 14597
used
- Manufacturer: Tria
Tria model Traino D210 feed rolls. S/N 33202959. Code 886.000.161, 2003 model year. 8.25″ diameter x 56″ wide knurled steel rolls powered by a 3.7 kW (5HP) 208-230V/460V 1,725 RPM motor through a gearbox. Pneumat...
Elk Grove Village, IL
PADDLE FEED ROLL 10249
used
Used paddle feed roll. 5″ diameter x 24″ wide 110V/1ph/60Hz 1/4HP motor air clutch chain and sprocket drive no controller.
Elk Grove Village, IL
VORTEX SA06-RS.0007 PNEUMATIC SLIDE GATE 12497
used
- Manufacturer: Vortex
Vortex model SA06-RS.0007, pneumatic slide gate, S/N 38478-004. 6″ square gate.
Elk Grove Village, IL
CONAIR EXF-450 3 AXIS PICKER 12243
used
- Manufacturer: Conair
Conair model EXF-450, 3 axis picker. S/N 011761. Job no. 101340, manufactured in April 1995. Pneumatic operation controller is not included.
Elk Grove Village, IL
CONAIR POWER FILL PUMP STATION 15005
used
- Manufacturer: Conair
Conair power fill pump station model B779901W, S/N B41865, 3 HP (1.75 kW) 480V/3ph/60Hz operation. The pump station receivers in the photo are not included.
Elk Grove Village, IL
DAVIS STANDARD DSC-U2 LAB ROTARY 15075
used
- Manufacturer: Davis-Standard
Davis Standard model DSC-U2 rotary knife cutter, S/N 17368BB. Laboratory sized unit.
Elk Grove Village, IL2025 McCloskey S110 2DT
new
- Manufacturer: Mccloskey
MCCLOSKEY INTERNATIONAL S110 is an excellent choice for sorting capabilities applications. Manufactured with quality and reliability in mind, this unit is ready to reduce downtime on your job site. Featuring effi...
Plainfield, IL2024 IROCK TS-516
used
- Manufacturer: Irock
2024 IROCK TS-516 is an excellent choice for material separation applications. This equipment has 50 operating hours and is ready to boost performance on your job site. Featuring efficient screening technology, t...
Multivac R105MF Thermoforming
used
- Manufacturer: Multivac
- Model: R105MF
Good condition Multivac R105MF Thermoformings manufactured in 2015. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
