Used Processing

2021 RollsRoller 540/170 Premium

• Manufacturer: RollsRoller

Height Adjustable Table Machine type: Process Equipment | Machine location: Oregon | Stock #: 200769 | Table size: 17 ft 9 in x 5 ft 7 in | Output: 1290 SQ FT/HR | Width of working area: 64″ | Work height flat be...

2022 2G CHP System

• Manufacturer: 2G

2G Combined Heat And Power System (CHP) This system is designed for the cogeneration of heat and power. Heat and power generation can also be used individually. Intended use was for supporting the process of conv...

2021 NS Maquinas RC 300

• Manufacturer: NS Maquinas

Machine type: Process Equipment | Machine location: Idaho | Stock #: 164612 | -grinding belt: 100mm x 3030mm | – polishing wheel diameter: 250mm-350mm | -polishing wheel hole: 75mm | -polishing wheel thickness: ...

1998 John Deere 770

• Manufacturer: John Deere
• Model: 770

Machine type: Process Equipment | Machine location: Colorado | Stock #: 004920 | – length: 2.78 m // 9.1 ft | – overall width: 7.6 m // 24.9 ft | – height: 2.4 m // 7.9 ft | – operating width: 7.5 m // 24.6 ft |...

Tomra BSI Optical Sorting Machine

• Manufacturer: Tomra

Overall Dimensions (Inches): Applications: Dried fruits Fresh fruits Vegetables Nuts IQF vegetables and fruits Air blast reject

2007 Kaeser TD 61

• Manufacturer: Kaeser
• Model: TD 61

Used Kaeser TD 61 Refrigerant Compressed Air Dryer, 2007: – 3 Ph – 60Hz

Rotary R1070

• Manufacturer: Rotary

Specs Dimensions: Length: 36 in (91 cm) x Width: 24 in (61 cm) x Height: 54 in (137 cm) (cabinet + monitor stand) Installed Options Battery charging docks for sensors Steering wheel and brake pedal lock kit Color...

Quadro Comil, Model U20,

• Manufacturer: Quadro

Quadro Comil, Model U20, Used Quadro Comil, model U20, stainless steel construction, driven by hp xp motor, on stainless steel adjustable height stand, machine serial# U20-0433, built 2004. �Requires impeller at ...

Galloup CIP Skid

• Manufacturer: Galloup

Galloup CIP Skid Used Galloup CIP skid, stainless steel construction, with 200 gallon stainless steel make up tank, SPX CIP cycle pump with 5 hp motor, SPX return waste pump with 7.5 hp motor, serial# N11162, bui...

Jetpharma Jet Mill, Model MC Jetmill 50

• Manufacturer: JetPharma

Jetpharma Jet Mill, Model MC Jetmill 50 Used Jetpharma jet mill, model MC Jetmill 50, stainless steel construction, with Ktron material feeder, type K-PH-MV-KT20, not complete , Jetpharma code# 24900C0516, built ...

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200#

• Manufacturer: Peterson

4" x 60" BE Peterson Distillation Column Reboiler Unit, 316 S/S, 200# Used BE Peterson distillation column reboiler unit, 316 stainless steel construction with 4" diameter x 60" high column section rated 200 psi ...

Aveka CCE Tech Air Classifier, Model 250

Aveka CCE Tech Air Classifier, Model 250 Used Aveka CCE Tech air classifier, model 250, cut size 1-50 micron, sharpness (D25/D75) .6-.8, feed rate up to 225 kg/hour, up to 250 scfm air flow, 12 in HG, 3 hp rotor ...

Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 40 HP

• Manufacturer: Alpine

Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 40 HP Used Alpine Augsburg Roto-Plexer Mill Grinder, Model RO 63/18, 4 knife rotor, swing away cover, 40 hp, 230/460 volt motor, blower discharge, serial#...

60" x 40' Sandvik Belt Flaker

• Manufacturer: Sandvik

60" x 40' Sandvik Belt Flaker Used 60" wide x 40' long Sandvik cooling belt flaker, approximately 32' cooling section, smooth belt with circulation system, belt driven by approximately 3 hp motor drive, end mount...

Quadro Comil, Model U5, 316 S/S, .5 HP

• Manufacturer: Quadro

Quadro Comil, Model U5, 316 S/S, .5 HP Used Quadro Comil, model U5, 316 stainless steel product contact surfaces, underdriven design with .5 hp, 120 volt motor, with feed hopper, serial# U5-0013R, built 2004. �In...