Used Extruders in New Jersey, USA

Betol 4024 Extruder - IPP# 104127

• Manufacturer: Betol

extrusion/film line (4) 12 KW for barrel w/screw speed indicator and ammeter Electrical supply 3 phase, 50 cycle, 380/440 volt Screw and barrel made of high grade corrosion resistant steel alloy (1) Betol Mdl 025...

Extruder 58 mm (2.3 in) - IPP# 210304

• Manufacturer: Werner & Pfleiderer

twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm...

Extruder 83 mm (3.3 in) - IPP# 210323

• Manufacturer: Werner & Pfleiderer

twin screw extruder Two 3,27 mm screws Electric heated barrel with water cooled jacket 68” long, 3” diameter discharge Unit is base mounted cooling water circulating skid

Extruder 300 mm (11.8 in) - IPP# 237086

• Manufacturer: Milinda

Plodders single worm two stage. Rated for 2,000 kg./Hr.

Extruder 44.5 mm (1.75 in) - IPP# 85782

• Manufacturer: Welex

1.75" x 36" 1 1/2" inlet water cooled 2-zone steam heated Drive 20 HP, DC volt, 500 volt arm. 300 volt field motor, max 1750 rpm thru Lufkin gear reducer, 9.91:1 ratio, 175 rpm output speed. Mtd in frame 5' wide ...

Extruder 38.1 mm (1.5 in) Aluminum - IPP# 78337

• Manufacturer: Sterling

Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exch...

Extruder 20 mm (0.79 in) Carbon Steel - IPP# 703671

Bone Brothers lab size single screw extruder. Unit has (4) electrically heated zones. Unit is complete with 7" diameter x 5" high stainless steel feed hopper cooling bath and control panel.

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224195

• Manufacturer: Axon

Axon Polystyrene Single screw extruder system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granu...

Carbon Steel Axon PXR-60D Extruder - IPP# 224194

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gran...

Extruder 60 mm (2.4 in) Carbon Steel - IPP# 224193

• Manufacturer: Axon

Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1)15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gra...

Extruder 99.8 mm (3.9 in) Carbon Steel - IPP# 706692

• Manufacturer: SMS Buss

single screw Ko-Kneader system, processing length 16 L/D, carbon steel heated screw, 15mm screw oscillating stroke, screw root diameter 65mm, Theo. pitch in kneading zone (2-spirals) 60mm, pitch in infeed zone (1...

Extruder 65 mm (2.6 in) Carbon Steel - IPP# 706693

• Manufacturer: APV

twin screw Ko-Kneader system, (1) Baker Perkins 800mm diameter chilled drum roll cooler, series 2000, serial #65712, drum with pre-breaker and Kibbler granulator, granulator driven by 10HP, 1500 rpm motor, pre-br...

Carbon Steel Axon PXR-60D Extruder - IPP# 224192

• Manufacturer: Axon

Axon carbon steel Single screw extruder system, throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry gr...

Extruder 69.9 mm (2.8 in) Stainless Steel 316 - IPP# 703669

• Manufacturer: Reifenhausser Kg

single screw extruder line General purpose screw and feed hopper. Production rate: 75 Kg/hr maximum polypropylene. Barrel has (8) heaters with (3) electric fans Extruder driven by a 60 HP (46 KW) DC motor. Line i...

Extruder 70 mm (2.8 in) Stainless Steel 316 - IPP# 705279

• Manufacturer: Weber and Seelander

Laboratory Simplex Production rate: 70 Kg/hour maximum (soap). Speed 4.3-25.8 rpm screws rotate in opposite directions, (side by side), double jacket for cooling. (1) electric heater. Extruder driven by 1.1 KW, 3...