Used Stamping Presses in Rhode Island, USA

Bruderer Stock Feed for Stamping Press Rebuilt

• Manufacturer: Bruderer

This is a Bruderer Stock Roll Feed for Stamping Press ....this unit was Rebuilt and in pristine condition! To feed metal flat stock to a high speed Bruderer Press. PTWS - 12012022-LR-9 R070925 Picture# 112920...

Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically Feed Metal Strip to Stamping Press

• Manufacturer: CWP

This is a Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically. It also has forward and reverse. Straighten Brass, Light Mild Steel, Copper, Gold & Silver... Can be used...

Multi Reel Motorized Coil Feed with Controller for Stamping Press Side Take up

We have 4 complete Reel Units. Palm Tree # LR-0000-110819LR-30 Pic# 101292019 R040521 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to mode...

PLC controlled linear movement for stock reel feed system stamping press side

This is a custom PLC controlled linear movement system Palm Tree # LR-0000-110819LR-26 Pic# 101282019 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary fro...

Rapid Air Automatic Stock Feed B2 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model #B2 - Spec # 873 - Max Stock Width: 2-1/2" - Max Stroke Range: 2" - Stock Thickness: .002"- .040" - Speed Cycles Per Minute: 230 - Pulling Capacity: 20 Lbs - Esti...

Rapid Air Automatic Stock Feed Model W20 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model W20 - Max. Material width is 2" - Max. Stroke is 20" - Stock Thickness is .003" to .050" - Speed cycle is 50 Cycles per minute - Pulling Capacity is 100 Lbs. PTW...

Rapid Air Automatic Stock Feed Model B6 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model # B6 D4 - Max. Material width is 1-1/2" - Max. Stroke is 6" - Stock Thickness is .002" to .040" - Speed cycle is 160 Cycles per minute - Pulling Capacity is 20 Lb...

Rapid Air Automatic Stock Feed Model A6 Stamping Press Flat or Wire Feeder

• Manufacturer: RapidAir

This is a Rapid Air Automatic Stock Feed - Model # A6 5050 - Max Stock Width: 1-1/2" - Max Stroke Range: 6" - Stock Thickness: .002"- .160" - Speed Cycles Per Minute: 230 - Pulling Capacity: 20 Lbs - Estimated S...

Greenerd No. 3 Arbor Press Heavy Duty Knife Making Metal Forming

• Manufacturer: Greenerd
• Model: NO 3

This is a Greenerd # 3 Arbor Press for Metal Forming... tested and works excellent! - Greenerd Brand - No. 3 PTWS - 12082022-LR-7 Picture# 12072022 * All information deemed accurate but may vary from model to...

Bolster Steel Plate Table 79" x 1-1/8" x 17-1/4" for stamping machines

• Manufacturer: Palm Tree Machinery

79" x 1" x 17 1/4" Palm Tree # LR-0000-12072019LR-2 Pic# 11082019 Bid with Confidence on this item, check our feedback!!! * All information deemed accurate but may vary from model to model. Contact Larry for...

3" Metal Scrap Chopper soft steel Brass Copper Aluminum Recycle Flat Stock & Wire

• Manufacturer: Star

This is a Scrap Metal Stock Chopper Recycle Brass Copper Steel Max Thickness 18 Gauge x 3"... Tested and Running Perfectly! - Max Thickness 18 gauge soft steel flat stock or wire - 3" max width - 110V - 1/2 HP G...

Cooper Weymouth 6" Scrap Chopper Recycle Shred Metal Brass Steel Copper Flat Stock with extra blades SUPER HEAVY DUTY!!

• Manufacturer: CWP

This is a Cooper Weymouth 6" Scrap Metal Stock Chopper Recycle Brass Copper Steel Max Thickness 16 Gauge x 6" with extra blades... Tested and Running Perfectly! - Max Thickness 18 gauge soft steel flat stock or ...

Durant 6" Metal Scrap Chopper HEAVY DUTY 16 Gauge soft steel Brass Copper Aluminum Recycle Flat Stock & Wire

• Manufacturer: Durant

This is a Scrap Metal Stock Chopper Recycle Brass Copper Steel Max Thickness 16 Gauge x 6"... Tested and Running Perfectly! - Max Thickness 18 gauge soft steel flat stock or wire - 6" max width - 220V - 3 Phase ...