Used Processing in Czech Republic

Trusted Seller
2011 EKO SV 566.1 SH
- used
- Manufacturer: EKO
Power input: 2.2 kW | Machine weight: 135 kg
Brno, Czech Republic
Trusted Seller
2017 Champion CP 1216
- used
- Manufacturer: Champion
The line consists of the following parts: Uncoiler (2 pcs) Splicer (2 pcs) Preheater (2 pcs) Bucket bridge Cassette MODU FACER Inline roll winder Inline sheet cutter
Brno, Czech Republic
Trusted Seller
2016 PLYMOVEMENT MOBILEPRO
- used
- Manufacturer: PLYMOVEMENT
Supply voltage: 400 V
Brno, Czech Republic
Trusted Seller
2007 Battenfeld BEX 1-75-30B
- used
- Manufacturer: Battenfeld
Equipment: Tow belt Screw diameter: 75 mm | Output capacity: 400 kg/h | Weight: 3400 kg
Brno, Czech Republic
Trusted Seller
2003 Tamoz FTHP 6-126
- used
- Manufacturer: Tamoz
Maximum temperature: -30-60 C | Machine weight: 1100 kg
Brno, Czech Republic
Trusted Seller
2009 SWAH BS
- used
- Manufacturer: Swah
Equipment: Conveyors The line is in good technical condition.
Brno, Czech Republic
Trusted Seller
2006 Demag Concept 420/810-2300
- used
- Manufacturer: Demag
- Model: CONCEPT 420810-2300
Clamping force: 420 t | Closing force: 4200 kN | Screw diameter: 70 mm | Injection capacity: 891 cm³ | Injection weight: 800 g | Height of the plate for mounting the mold: 1200 mm | Width of the plate for mounti...
Brno, Czech Republic
Trusted Seller
2005 CECCATO ARIA CSM 7.5 DXM 200L
- used
- Manufacturer: Ceccato
- Model: CSM
Machine weight: 198 kg
Brno, Czech Republic
Trusted Seller
Strapping machines
- used
- Manufacturer: 3M
In good technical condition.
Brno, Czech Republic
Trusted Seller
1995 Engel ES 330/80 HLST
- used
- Manufacturer: Engel
- Model: 330/80
Clamping force: 80 t | Weight of the injection molding machine: 5300 kg
Brno, Czech Republic
Trusted Seller
1999 Engel ES 650/275 HL
- used
- Manufacturer: Engel
- Model: ES 650
Equipment: Robot Clamping force: 275 t | Weight of the injection molding machine: 20000 kg
Brno, Czech Republic
Trusted Seller
2017 Surfin Z-4645
- used
- Manufacturer: Surfin
In good technical condition.
Brno, Czech Republic
Trusted Seller
1998 Engel ES 200/50 HL ST
- used
- Manufacturer: Engel
- Model: ES 200
Clamping force: 50 t | Machine width: 3810 mm | Machine height: 2000 mm | Weight of the injection molding machine: 4700 kg
Brno, Czech Republic
Trusted Seller
2007 Engel VC 80/25 TECH
- used
- Manufacturer: Engel
Clamping force: 25 t | Plate dimensions: 470 x 280 mm | Closing force: 250 kN | Screw diameter: 22 mm | Machine length: 2720 mm | Machine width: 1030 mm | Machine height: 1760 mm | Weight of the injection moldi...
Brno, Czech Republic
Trusted Seller
2003 ATLAS COPCO GA 22
- used
- Manufacturer: Atlas-Copco
- Model: GA 22
Total hours: 11.000 h | Efficiency: 53.9 l/s | Working pressure: 10 bar | Block speed: 3000 1/min | Nominal power: 22 kW | Machine weight: 500 kg
Brno, Czech Republic
Buzuluk 10502 Plastic/Rubber Processing
- used
- Manufacturer: Buzuluk
- Model: 10502
Good condition Buzuluk 10502 Plastic/Rubber Processing. Located in Czech Republic and other countries. Click request price for more information.
Czech Republic