Used Polymer Systems Granulators & Pelletizers

Polymer Systems 912-ESRL

• Manufacturer: Polymer Systems

Machine type: Process Equipment | Machine location: Utah | Stock #: 738597 | – throat size at chamber: 9 x 12 in | – screen area: 190in^2 | – motor: 7.5-10HP | – cutting circle diameter: 10.3in | – rotor knives:...

Polymer Systems Corp Granulator / Grinder 1116 15 hp Sharp Blades

• Manufacturer: Polymer Systems

“Used in working condition” Polymer Systems Granulator Grinder 1116 15 hp motor currently wired for 480 volts Sharp blades 11" x 16" opening Screen size 1/4" Photo attached of polypropolyne that was ground with g...

Polymer Systems 1120

• Manufacturer: Polymer Systems

Model# 1120 20"W X 11" Tall Throat 25HP

Polymer Systems 1120

• Manufacturer: Polymer Systems

Model# 1120 20"W X 11" Tall Throat 25HP

Polymer Systems 68 Silenator

• Manufacturer: Polymer Systems

5hp Soundproof & 230 volt Used Polymer Systems 68 Silenator Material Reduction Machines for sale. This pre-owned machine is available all over the US

Polymer Systems Model GRAN 20 (20) Horse Power Granulator

Polymer Systems Model GRAN 20 (20) Horse Power Granulator Horse power- 20 Feed throat opening – 20″ x 12″ Side Chute opening – 6.25″L x 8.5″H Knife configuration- 3 knife Bed Knives- 2 Discharge diameter- 2″ Scre...

18" x 24" Polymer Systems Granulator, Model 1824PST, 40 HP

• Manufacturer: Polymer Systems

Used 18" x 24" Polymer Systems Granulator, Model 1824PST Tangential Feed Cutting Chamber, 3 Knife Open Rotor, Double Angle Cut, 16" Cutting Circle, 40 HP Baldor Motor 2,100 LBS/HR Listed Average Throughput, 7/16"...

11" x 16" Polymer Granulator, Profile Chute

• Manufacturer: Polymer Systems

Used 11" x 16" Polymer Granulator 2 Knife Open Rotor, 1 Bed Knife 3/8" Screen 15 HP Motor Sold As Is

Hosokawa Polymer Systems 20/12ro Granulator - 20/12 Ro Sil Tande

• Manufacturer: Polymer Systems

Used Hosokawa Polymer Systems Rotoplex Granulator, Model 20/12ro Sil Tandem, Twin Mounted 20/12 Ro Units, 5 Hp, 460 Volt Each, Approximately 200 Mm(8") X 120 Mm (5) Feed Opening, With Feed Hopper And Discharge Bl...

POLYMER SYSTEMS Rotor Knife 64386 #34125

• Manufacturer: Polymer Systems

** Set of two ** 15 1/2 blade Approx size 15 1/2 x 2 5/8 x 1/2 B3-244 C2 Edge to center of first hole 1 1/8" Center to center 2 5/8" Expedited shipping services are available This piece is located at Ideal Mach...