Used Processing in North Brabant, Netherlands

Trusted Seller
Venanzetti EVA 140-25
- Manufacturer: Venanzetti
“Venanzetti EVA 140-25 “ for Sale Included: -Frame – Rubber springs
Soerendonk, Netherlands
Trusted Seller
2 Pcs. Friedrich 4,400 (2,750) x 1,200mm.
"Friedrich 4,400 (2,750) x 1,200mm. " for Sale With Rubber wearplates (Metso Trellex SQ300) Included: - Rubber springs - Spring holders for under frame
Soerendonk, Netherlands
Trusted Seller
2006 Extec Robotrac 7000
- Manufacturer: Extec
- Model: ROBOTRAC 7000
Available at Boss Machinery! This Extec Robotrac 7000 Screener from 2006 has an engine power of 78 kW and counts 6573 operational hours. The total weight of this Extec Robotrac 7000 is 21980 kg and the dimensions...
Veldhoven, Netherlands
Trusted Seller
1994 van Oirschot dolav tipper Backsaver ST
With rechargable battery Tipping height: 1050 mm | Tipping angle: 0 - 90° | Working load: max 900 kg | Container: 1000 x 1200 x 800 mm | Power: 1Ph, 230VAC, 50Hz | Dimensions: 1500 x 1350 x 1150 mm | Weight: 300 ...
Oirschot, Netherlands
Trusted Seller
Spaleck SFLU 1950-300 x 3000
- Manufacturer: Spaleck
6 pieces. “Spaleck SFLU 1950-300 x 3000 “ for Sale Included: – Frame with rubber springs – Springs
Soerendonk, Netherlands
Trusted Seller
AEG OA 1750 / 900 – AS – GY
- Manufacturer: AEG
"4 Pcs. AEG OA 1750 / 900 - AS - GY" for Sale With stainless steel wear plate.
Soerendonk, Netherlands
Auction
(c) Flush coil installation
Consisting of 2 stainless steel tanks size approximately ø 1800 x h4400 mm, each with 1 Vischer slurry press, 2 mixers, 1 bottom valve, 2 OBPI cavity pumps, type: BPI 80DNL1, capacity: 39 m3/h, motor power: 5.5 K...
Uden, Netherlands
Visit Auction Website
Trusted Seller
2020 Van Oirschot dolav tipper Backsaver ST
With rechargable battery and CTEK MXS 7.0 charger Tipping height: 980 mm | Tipping angle: 0 - 90° | Working load: max 900 kg | Container: 1000 x 1200 x 800 mm | Power: 1Ph, 230VAC, 50Hz | Dimensions: 1450 x 1350 ...
Oirschot, Netherlands
Trusted Seller
De Jager Crate washers
De Jager washing machine, plastic chain belt, belt width: (1x) 40 mm, clearance: 420 mm x 240 mm, total dimensions: 1100 mm x 900 mm x 1800 mm. Including 2 pallets with parts.
Oost-, West- en Middelbeers, Netherlands
Trusted Seller
1999 Van Oirschot dolav tipper Backsaver ST
With rechargable battery and CTEK MXS 7.0 charger Tipping height: 980 mm | Tipping angle: 0 - 90° | Working load: max 900 kg | Container: 1000 x 1200 x 800 mm | Power: 1Ph, 230VAC, 50Hz | Dimensions: 1400 x 1350 ...
Oirschot, Netherlands
Auction
(c) 2014 Toro FRC-20 Dissolved Air Flotation Unit
- Manufacturer: Toro
equipped with stainless steel chassis, walking platform, 1 vertical steel pressure tank, 2 transport pumps, 3 dosing pumps, 1 Endress + Hauser flow meter, valves and piping under the Flotation unit. including 1 s...
Uden, Netherlands
Visit Auction Website
Auction
(c) Feed auger cutting machine
Motor power: 11 KW, 400 volts, equipped with emergency stop protection, Lincoln central lubricator, 1 stainless steel motor-driven feed conveyor, dimensions: L4000 x W1600mm, including galvanized walkway. This l...
Uden, Netherlands
Visit Auction Website
Trusted Seller
Mafo Crate washers
Mafo washing and drying machine for crates with loading and unloading device, serial number: 200-800-890, year of construction: 01/2007, 400 V, 3 Ph, 50 Hz, 27.5/13.8 A, 15.0 kW, maximum crate width: 690 mm, dime...
Oost-, West- en Middelbeers, Netherlands
Auction
Shaft - 2014 - SE630 M10 AEM Brushless 1200KW - Power generator
Voltage 690 Volt Star * speed 600 rpm * direction Cw/ccw * protection IP23 * version maritime * test FAT * max amb temperature 45 degrees * construction IM B3 * frequency 50-60 hertz * overplayed 945 rpm * Duty. ...
Westerhoven, Netherlands
Visit Auction Website
Trusted Seller
Van De Vecht Crate washers
Van De Vecht washing and drying machine for crates, clearance: 600 mm x 500 mm, chain conveyor, plastic belt, belt width: 480 mm, total dimensions: 21350 mm x 1500 mm x 1850 mm.
Oost-, West- en Middelbeers, Netherlands