Used Processing in Poland

ATLAS COPCO FX 7

• Manufacturer: Atlas-Copco
• Model: FX 7

was built in 2014. This reliable, cost-effective and easy-to-use device effectively dries compressed air of oil, moisture and water vapour, eliminating the risk of the formation an oily deposit which is dangerous...

BATTENFELD TM 1300

• Manufacturer: Battenfeld

was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection mould...

Compressor Suction EKOM DUO/M (with box, with membrane dryer)

New, Made in Slovakia, Compressor DK50 PLUS + Suction machine Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar)...

SUCTION PUMP FOR EKOM 2.1-10 (stationary mammal in a box)

new Slovak production, Mammal in silent housing size DK50.10S, The mammal is standard equipped with a control module that starts the device after 24V AC / DC signal from the unit. The box effectively reduces the ...

SUCTION PUMP FOR EKOM 2.1Z (stationary mammal without housing)

new Slovak production, Mammal without silencing housing, The mammal is standard equipped with a control module that turns on the mammal after 24V AC / DC signal from the unit, Technical data: Rated voltage / freq...

Compressor and Mammal EKOM DUO 2 (with box)

New, Made in Slovakia, Compressor DK50 2V + 2 suckers Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 2 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 140 l....

EKOM DUO Compressor and Suction (with box)

New, Slovak Manufacture, Compressor DK50 PLUS + Suction, Technical data: Frequency: 230V/ 50 (60) Hz Number of dental sets: 1 Control voltage: 24/0.1 V/A DC/AC Compressor capacity (operating pressure 5-7bar): 75 ...

Industrial Transport Fans – 1.5 to 22 kW | Pneumatic Conveying | Made in Germany & Italy

• Manufacturer: Germany, Italy

These industrial transport fans are reliable and efficient machines for pneumatic conveying of fibers, dust, and loose textile or insulation materials. Built in Germany and Italy between 1995 and 2010, they featu...

Pieco Serwis Gas Furnace 'C' With Control & Loading Bogey

With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 20 Ton, Hearth Length 4.7m, Gate Clearance Width 3.2m, Height 2.3m, Temperature 1,100° C. Temperature Dispersion ±10° C. With E...

Pieco Serwis Gas Furnace 'B' With Control & Loading Bogey

With Movable Bottom (B) Automatic Control With Computer Visualisation. Load Capacity 110 Ton, Hearth Length 11m, Gate Clearance Width 7.5m, Height 4m, Temperature 1,100° C. Temperature Dispersion ±10° C. With Ext...

Ingersoll Cast Iron Tool Setting Unit

• Manufacturer: Ingersoll Rand

Cast Iron Table

Approx Dimensions L2,500 x W1,500 x H700mm.

Atlas Copco GA11 FF Rotary Screw Compressor With Gudepol HDX E 100 Refrigerate Dryer

• Manufacturer: Atlas-Copco
• Model: GA 11

Working Pressure 7.5 bar. 11kW Motor.

Kaeser Secotec TG 780 Refrigeration Dryer With Kaeser Aquamat CF 168 Oil Separator & Kaeser F700KB Filtration

• Manufacturer: Kaeser
• Model: Secotec

Maximum Working Pressure 13 bar. Flow Rate 78 m³/min. S/No. 1316-9323958 (2023).

ATMOS PDS PDP 35 towable air compressor

• Manufacturer: Atmos

was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy...