Used Presses

75 Ton Wabash Hydraulic Molding & Laminating Press

• Manufacturer: Wabash
• Capacity: 75,000 kg
• Stroke length: 304.8 mm

75 Ton Wabash, 4 Post, upstroke, 54” x 54” hot plates, 12” str., 20”-33” DL, #89552 USED 75 TON WABASH HYDRAULIC MOLDING & LAMINATING PRESS 4 post upstroke type; floor standing Daylight opening between (electrica...

PRESS - Automatic, Manuf: M.A.M. s.r.l.

PRESS - Automatic, Manuf: M.A.M. s.r.l, SR: 00182 **Please Note this item is located at 3990 44th St. SE, Kentwood, MI 49512-3942, Must be removed through following dates: 2/16-2/20

400 TON PTC STRAIGHT SIDE MECHANICAL PRESS

• Manufacturer: PTC
• Capacity: 400,000 kg
• Stroke length: 203.2 mm

This 400-ton PTC Straight Side Mechanical Press, model BL2-400-84 X 48, offers robust performance with precision engineering. Manufactured in 2003, it features a capacity of 400 tons and a stroke length of 8 inch...

Hull 359-L Transfer Molding Press

• Manufacturer: Hull
• Capacity: 6,000 kg
• Stroke length: 152.4 mm

6 Ton Hull 359-L Transfer Molding Press 6 TON HULL UPSTROKE HYDRAULIC TRANSFER MOLDING & LAMINATING PRESS w/1.5 Ton Top Transfer Model 359L; 4 Post Type (Electrically Heated) Driven by 2 HP 960 RPM 208/3/50 Motor...

Arbor Press

Arbor Press

New 30 Ton Dake M-30 Shop Press

• Manufacturer: Dake
• Capacity: 30,000 kg
• Stroke length: 152.4 mm

30 Ton Dake Model M-30, 23.5" Btw Uprights, 6" Ram Travel New 30 Ton Dake M-30 Shop Press Manual Operation Specifications are accurate to the best of our knowledge, subject to verification. Features: Screw RAM

2023 250 Ton Beckwood Heated Platen Press - New

• Manufacturer: Beckwood
• Capacity: 250,000 kg
• Stroke length: 304.8 mm

250 Ton Beckwood Model 4P250F2828, 28" x 28" Heated Platens, 12" str., 12" DL, New 2023 POSITION CONTROLLED PRESS HEATED PLATENS 50HP MOTOR 100 GALLON HYD FLUID RESERVOIR PEDESTAL TOUCHSCREEN CONTROL Press was in...

Yutaka Engineering Press Fit Machine

• Manufacturer: Yutaka Engineering

Yutaka Engineering Press Fit Machine, , Power 208 Volts / 23 Amps / 3 Phase , Weight 5000 Lbs., Dimensions 5 ft. x 4 ft. x 10 ft. , Notes Weights and Dimensions Are Estimated , Asset Number / PK-0306. Note: This ...

HANNIFAN B-16 PNEUMATIC PRESS MACHINE

• Manufacturer: HANNIFAN

HANNIFIN B-16 PNEUMATIC PRESS MACHINE, S/N:NA, S-4766c Standard Specifications: * Inquire for additional specifications *

Ott Feed Thru Hot Press Stock #201629

• Manufacturer: OTT

Ott Feed-Thru Hot Press Feed Thru Mylar Belt Eight Hydraulic Cylinder on Top Platen Two HTT Boilers Type WTE 08-5-50-1, Max Temperature 300 Degrees Celsius (New in 2001) Press was purchased Rebuilt in 1999

250 Ton Simpac Hydraulic Press

• Capacity: 250,000 kg
• Stroke length: 685.8 mm

250 Ton Simpac, Model PDH-250, 27" stroke, 35" DL, 62" x 45" bed, 100 Ton Cushion, NEW 2017 All machinery specifications must be independently verified by buyer. Specifications are accurate to the best of our kno...

New 120 Ton Dake EM-120 Shop Press

• Manufacturer: Dake
• Capacity: 120,000 kg
• Stroke length: 400.05 mm

120 Ton Dake Model EM-120, 47" Btw Uprights, 15.75" Ram Travel New 120 Ton Dake EM-120 Shop Press Motor & Hand Operated Specifications are accurate to the best of our knowledge, subject to verification. Features:...