Machine Tools » Presses » Germany

Building Filters

127

Used processing in Germany

  • 1989 Oevermann DP-100

    1989 Oevermann DP-100

    • Manufacturer: Oevermann

    Hydraulic press Oevermann, 1.000kN Used hydraulic double column press Speeds: Rapid from: 300 mm/s Draw cushion, active, 400kN, stroke 200mm Approved for manual insertion work Equipped with oil...

    Ennepetal, Germany
  • IMV Combi HYMEC 8000 /

    IMV Combi HYMEC 8000 / 630

    • Manufacturer: IMV

    Within the framework of the first in-house exhibition of the association Formitaly in the summer of 2011 in the premises of the company I.M.V. in Villasanta / Italy, the highlight was the presentation of this spe...

    Ennepetal, Germany
  • 1976 Moll EP0

    1976 Moll EP0

    • Manufacturer: B&R Moll

    Small automatic punching press Moll with mounting plate for feed Used automatic punching press Equipped with: - Pivoting mounting plate for feed - Motorized oil central lubrication - Sliding guide via V-prisms - ...

    Ennepetal, Germany
  • 1986 Minster Pulsar 30 –

    1986 Minster Pulsar 30 – TR 2 - 30

    • Manufacturer: Minster

    High-speed automatic punching press Minster (USA), 30 tons, with Sankyo feed Used high-speed automatic punching press Other Hydraulic clutch Circulating oil lubrication Equipped with: Precision feed Sankyo Variax...

    Ennepetal, Germany
  • 1980 Betz EZL 300

    1980 Betz EZL 300

    • Manufacturer: Betz

    Make Betz, pressing force 300 tons, safe to insert Used single-column eccentric press Other approved for insertion work Safety valve made by Herion Pneumatic clutch made by Desch Motorized grease - central lubric...

    Ennepetal, Germany
  • TUBEND HP-20

    TUBEND HP-20

    • Manufacturer: Tubend
    • Model: HP20
    • Stroke length: 200 mm
    • Power requirement: 2.2 kW

    Control: conventional | Delivery: ab Lager | Pressure: 20 t | Stroke: 200 mm | Table-size: 550 x 550 mm | Working speed:: 10 mm/ sec. | Work height max.: 940 mm | Toolpiece height max.: 200 mm | Total power requ...

    Velen, Germany
  • TUBEND HP-10

    TUBEND HP-10

    • Manufacturer: Tubend
    • Model: HP10
    • Stroke length: 200 mm
    • Power requirement: 1.1 kW

    Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools

    Velen, Germany
  • 1982 HYLATECHNIK HSP 40 Z

    1982 HYLATECHNIK HSP 40 Z (MUELLER GEFREES) #1052-08010

    • Manufacturer: Mueller
    • Stroke length: 100 mm
    • Power requirement: 15 kW

    - with die cushion - with light bareer make SICK Control-type: conventional | Pressure: 40 t | Distance between columns: 695 bzw. 215 mm | Stroke: 100 mm | Table surface area: 650 x 440 mm | Ram surface: 580 x 28...

    Bühl, Germany
  • HIDROLIKSAN HD 80 - 920

    HIDROLIKSAN HD 80 - 920

    • Manufacturer: Hidroliksan
    • Model: HD 80 - 920
    • Stroke length: 400 mm

    Hand and Motor operated. Side-sliding cylinder. Control: conventional | Delivery: ab Werk | Pressure: 80 t | Stroke: 400 mm | Table surface area: 920 x 540 mm | Motor output: 2,2 kW | Liter capacity: 9,0 l | Dayl...

    Velen, Germany
  • INTEMACH HD 200 - 1500

    INTEMACH HD 200 - 1500

    • Manufacturer: INTEMACH
    • Stroke length: 400 mm
    • Daylight: 1,490 mm

    Presses can be operated both by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

    Velen, Germany
  • WMT P 20

    WMT P 20

    • Manufacturer: WMT
    • Stroke length: 180 mm

    Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - ...

    Velen, Germany
  • WMT P 10

    WMT P 10

    • Manufacturer: WMT
    • Stroke length: 180 mm

    Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge - ...

    Velen, Germany
  • HIDROLIKSAN HD 30 - 720

    HIDROLIKSAN HD 30 - 720

    • Manufacturer: Hidroliksan
    • Stroke length: 400 mm

    High-quality, hydraulic press can be used either by hand or by motor operate. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking

    Velen, Germany
  • 2005 COMPAC HP 25J

    2005 COMPAC HP 25J

    • Manufacturer: COMPAC
    • Stroke length: 145 mm

    Side-adjustable cylinder Control: conventional | Delivery: ab Lager | Pressure: 25 t | Stroke: 145 mm | Daylight between the columns: 600 x 160 mm | Dayligth: mm | Diameter of piston: mm | Weight of the machine c...

    Velen, Germany
  • HIDROLIKSAN HD 60 - 820

    HIDROLIKSAN HD 60 - 820

    • Manufacturer: Hidroliksan
    • Model: HD 60 - 820
    • Stroke length: 400 mm

    Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

    Velen, Germany
56789

Overview

Presses are machines used to apply pressure to materials in order to shape, mold, or compress them. They are commonly used in manufacturing and metalworking industries for tasks such as forging, stamping, and forming. There are various types of presses, including hydraulic, mechanical, and pneumatic, each suited for specific applications and materials.

FAQ

What should I consider when buying a used press?

Consider the type of press, its capacity, age, and overall condition. Check for any signs of wear and tear, and review maintenance records if available.

How do I ensure the press is shipped safely to my location?

Use a specialized transport service experienced in handling heavy machinery. Make sure the press is securely fastened and protected during transit.

What is the maintenance schedule for a press?

Regular maintenance includes checking hydraulic fluids, inspecting for leaks, and ensuring all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance intervals.