Used Molding Presses in Italy

1995 UTAS GR3 Mold Testing Press

Mold Testing Press UTAS GR3 year 1995 with control unit, cycle programming keyboard, wax injector device.

Mold Testing Press UTAS GR2

Max closing force: 200/400 KN | Max opening force: 100/200 KN | Plan size: 750x1100 mm | Max mold weight: 5000 kg | Upper mold max weight: 2000 kg | Closing/opening speed: 50/65 mm/sec | Closing/opening pressure...

MILLUTENSIL PRESS MOD.MIL 143

• Manufacturer: Millutensil

MILLUTENSIL 10128 MILLUTENSIL MIL 143 MOLD TESTING PRESS Useful table length mm 1400 Useful width of table mm 1200 Max passage between columns on length mm 1540 Max passage between columns on the width mm 1300 T-...

PROOFING PRESS PFC PR2

PFC 09950 USED MOLD TESTING PRESS Removable and tilting table Closing force max Ton 20 Max opening force Ton 10 Upper table dimensions mm 750x1100 Lower table dimensions mm 750x1100 Opening min max 85- 985 Movabl...

GALATO T35 TL/V-SM PRESS

• Manufacturer: Galato

GALATO 09935 C-NECK PRESS Nominal force: 350 kN Adjustable stroke: 11-78 mm Strokes per minute: 122 Slide adjustment: 50 mm Clearance at bottom dead center: 275 mm Maximum clutches per minute: 35 Maximum flywheel...

MOSSINI PRESS 250 TON

• Manufacturer: Mossini

MOSSINI 10141 MOSSINI OLEODYNAMIC PRESS mod. PO/2M/P 250 Nominal force Ton 250 Slide stroke mm 1,000 Worktable dimensions mm 2,500 x 2,000 Max. workpiece dimensions mm 2,400 x 1,900 Max. workpiece weight kg 5,000...

N. 2 Presses, Molds and Metal Baskets

• Manufacturer: Gobid

The lot includes: n. 1 Omec Press - ref. 16 n. 1 Press - ref. 17 Molds of Various Types and Sizes - ref. 69 n. 6 Metal Baskets with Finished Products Inside - ref. 56

2006 Millutensil MIL 203

• Manufacturer: Millutensil

MILLUTENSIL MIL 203 mold testing press year 2006 Max closing force: 1500 KN | Max opening force: 350 KN | Plan size: 2000x1500 mm | Max mold weight on the bottom plane: 30000 kg | Max mold weight on the top plate...

SCHULLER 800 TON TWO-UPRIGHT MECHANICAL PRESS Product code: 33477

• Capacity: 800,000 kg
• Stroke length: 650 mm

Hurry! This product has already been viewed 523 times! Don't miss out! SCHULER 800 TON YEAR OF BUILD CAPACITY THRUST POINTS SLIDE STROKE VERTICAL LIGHT from the mold carriage, CBR SLIDE ADJUSTMENT SLIDE DIMENSION...

Greenerd Press

• Manufacturer: Greenerd

Lot FOR SALE FROM AN ACTIVE COMPANY Greenerd baler model 4D3030X1630L5, s/n 91T4453, 30 tons. Used by a company specializing in helicopters, with a mold inside. The goods for sale do not comply with EC regulatio...

BENELLI T100 PRESS T100 TYPE PE/100/R/1P/S

• Manufacturer: Benelli

BENELLI PRESS T100 – Serial 1302 – TYPE PE/100/R/1P/S Mechanical press BENELLI T100, serial number 1302, model PE/100/R/1P/S, suitable for stamping, punching and processing precision mechanics. Solid and reliabl...

TCS 300 TON MOLD TEST

TCS 10164 Closing force 300 Ton Moving plane opening force 100 Ton Operating pressure 250 bar Platen overall dimensions 3,500 x 2,500 mm Minimum mold size (at max. clamping force) 2,800 x 2,000 mm Minimum clearan...

FIXED PISTON PRESS 200 TON 3300 x 1000 ton 200 H 1000mm. Under mold 650mm approx. product code: 29712

Hurry! This product has already been viewed 1,737 times! Don't miss out! 200-TON FIXED PISTON PRESS 3300 x 1000 Approximately 200 tons Height from floor to top: 1000 mm. Under-die: approximately 650 mm. We used 5...

Plastic injection machines and equipment

Lot Lot consisting of: - Plastic injection press, SANDRETTO brand, type SERIE NOVE T 430/125, complete with Robot, temperature controller, Cooler, mold shapes and Moretto Granulator. Consult the Lot 1 PDF docume...