Manufacturer

Used Presses in Georgia, United States

- 24 listings found
Sort by Price: Low to High | High to Low
  • 2014 Bliss HS-5000 10393

    • Manufacturer: Bliss
    • Capacity: 5,000 Ton
    • Stroke: 1,067 mm

    Size & make of pumps – two vickers pv-2125 & one tuthill 6-0 size & make of motor – two west. 150 hp, one west. 5 hp 7 four west 10/2.5 hp make & type of valves bliss – air controlhpv-13379 bliss – speed change ...

    No price
    Marietta, GA, USA
  • 2010 Sumitomo SHP-2500 10317

    • Manufacturer: Sumitomo
    • Stroke: 650 mm

    Hydraulic press for straightening steel plate ram mobile type upper mold turning mechanism upper jig removable device lower jig driving unit

    No price
    Marietta, GA, USA
  • Hanyoung 2500 10253

    • Manufacturer: SEC

      Single acting press plc controller cylinders – 1 main, 2 return

      No price
      Marietta, GA, USA
    • 2013 CIM TEK CIM HP7000 10246

      • Manufacturer: Tek
      • Capacity: 250 HP
      • Stroke: 1,400 mm

      stroke: 1,400 mm | capacity: 250 hp | material: sc49 | oil cooler: 1,000 liter | speed - up: 189 mm/sec | upper size: 2,100 x 4,500 x 650 mm | open height: 3,300 mm | rod diameter: 220 mm | speed - down: 105 mm/...

      No price
      Marietta, GA, USA
    • 2007 Schuler SHP 10245

      • Manufacturer: Schuler

        bed size: 4,520 x 2,150 mm | daylight: 2,200 x 3,280 mm | ram speed: 365 mm/sec | working table size: 3,150 x 2,150 mm | available tool height: 1,000 mm

        No price
        Marietta, GA, USA
      • 4000 10242

        • Manufacturer: SEC

          machine weight: 1,300 ton | pressing speed: 100 mm/sec | height above floor: 13,370 mm | movable table size: 5,500 x 6,000 mm | distance below floor: 7,500 mm | distance between columns: 5,900 x 4,100 mm | dista...

          No price
          Marietta, GA, USA
        • Duisburg 7500 10228

          • Manufacturer: Duisburg
          • Stroke: 2,500 mm

          Repair of overall geometry: replacement of column 4 re-machining of columns 1-3 machining & pre-stressing of the heap table & replacement of slide rails replacement of mobile gantry guide rings repair of the pre...

          No price
          Marietta, GA, USA
        • 2000 10209

            • Stroke: 450 mm

            productivity: 50 strokes/hour | nominal force: 300 mn | weight of press: 1,050 ton | -in other cylinders: 32 mpa | -in working cylinder: 100 mpa | eccentricity of load: 150 mm | force of side ejector: 8 mn | tot...

            No price
            Marietta, GA, USA
          • 10208

            • Manufacturer: SEC

              Four columns movable cross piece & table slide top tool grip devise for hydraulic expanding of rings up to 2,2240 mm diameter

              No price
              Marietta, GA, USA
            • 2010 Skoda 10160

              • Manufacturer: Skoda
              • Capacity: 6,300 Ton
              • Stroke: 2,500 mm

              Glama 80 ton manipulator 2 columns oilgear hydraulics fast acting – pull down

              No price
              Marietta, GA, USA