Building Filters
- Trusted Seller
Flat iron bender from – hydraulic 29083
Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press
Wiefelstede, Germany - Trusted Seller
1995 Hess Speedy Quick Step 90713
- Manufacturer: Hess
Workpiece length min- max mm: 3500 | Workpiece height min- max mm: 2500 | Working width max mm: 600 | Hydraulic/pneumatic: hydraulic | High pressure/low pressure: high pressure | Cylinder vertical: 3 | Cylinder ...
Petershagen, Germany - Trusted Seller
2001 Hydraulic press SACK & KIESSELBACH TRP 200
- Stroke length: 300 mm
- Daylight: 1,000 mm
Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under powe...
Kehl, Germany - Trusted Seller
1997 CLIFTON 505 D SPL APP
- Manufacturer: Clifton
- Stroke length: 400 mm
- Power requirement: 56 kW
- control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and sa...
Leipzig, Germany 
1996 HENSEL EBU HK 130 ZR
- Manufacturer: HENSEL
- Stroke length: 518 mm
- Power requirement: 22 kW
permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ...
Monheim am Rhein, Germany- Trusted Seller
Massey Ferguson 2234 XDTC EU
- Manufacturer: Massey Ferguson
2234 XDTC EU Wide-angle PTO shaft type 3, tyres 620/50x22.5 Bale chute Bale ejector Air brakes Automatic chain lubrication FieldStar 5 Terminal control panel Manual support foot Pick-up guide plate with rollers H...
- Trusted Seller
1977 Gripper feed from Raster - HR 60 NL-4S 32904
- Manufacturer: Raster
Nipper feed for eccentric press, single-column press, automatic punching press, single-column eccentric press, eccentric press, single-column press
Wiefelstede, Germany 
1997 HENSEL EBU HK 130/1600 P2
- Manufacturer: HENSEL
- Stroke length: 520 mm
- Power requirement: 24.2 kW
Approved for automatic operation in accordance with the German accident prevention regulations (UVV) 2025 new control and safety electronics - Siemens S7-1500F, -- Convenient operation via touch panel - infinit...
Monheim am Rhein, Germany
1998 KAISER KSTU 1600 12,5-3PSR
- Manufacturer: Kaiser
- Stroke length: 590 mm
- Power requirement: 64.5 kW
Approved for automatic operation according to CE standard - With new Siemens S7-1500F control and safety electronics -- Convenient operation via touch panel - Infinitely variable direct current drive - Hydraulic...
Monheim am Rhein, Germany- Trusted Seller
2016 FAGOR LE4-2000-5000-2500 Double Column Drawing Press - Mechanical
- Manufacturer: Fagor
- Stroke length: 325 mm
- Shut height: 1,500 mm
Modern mechanical link-drive press for tool tryout operations in pristine condition. ONLY: 62.500 strokes !!! Featurtes: Moving bolster, hydraulic cushion ( 4 Cylinder ) in table section, mico-inch mode, single s...
Germany 
1995 KAISER KSTU 1000-11 D
- Manufacturer: Kaiser
- Stroke length: 670 mm
- Power requirement: 22 kW
Approved for automatic operation according to CE standard - WITH new control and safety electronics - Siemens S7-1500F, -- Convenient operation via touch panel -- Control system design in accordance with DIN EN ...
Monheim am Rhein, Germany
1986 KAISER V 160 WR / 1300
- Manufacturer: Kaiser
- Model: V 160 WR 1300
- Power requirement: 18.5 kW
Approved for automatic operation in accordance with German accident prevention regulations (UVV) - partially overhauled - WITH new switch cabinet with control and safety electronics - Siemens S7- 1500F, convenien...
Monheim am Rhein, Germany- Trusted Seller
1973 HEILBRONN REPD 100
- Manufacturer: Heilbronn
- Model: REPD 100
Additional Features Very well-preserved double-walled single-column eccentric press, made of welded steel with a transverse eccentric shaft and gear reduction. Accessories Break plate and ejector in the ram, clam...
Wiesbaden, Germany - Trusted Seller
1979 SCHOEN SH-PZ 250
- Manufacturer: Schoen
pressure 250 t distance between columns 600 mm stroke - mm total power requirement 22 kW weight of the machine ca. 9 t dimensions of the machine ca. 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single strok...
Gorxheimertal, Germany - Trusted Seller
KRÄMER E2000-1250, LOCK MET 30+ Tablet high deduster with metal check
- Manufacturer: Kramer
• Conveying height 1,290 mm• Inlet height 620-780 mm• Tablet diam. 3-25 mm• Deduster path total length 15 m• Conveying capacity depending on tablet size 68,000-3,500,000 tablets/h• 2 inlet adapters: rectangular 1...
Stapelfeld, Germany
