Used Presses in Germany

Trusted Seller
12800 liter tank, Aisi 316
- Manufacturer: Wegusta Apparatebau
max. allowable working temperature: 100 °C notice: some residues of previous content, manhole cover plated remarks: 4 support brackets Fe; diameter manhole 580 mm; slight metallic discolourations inside; total he...
$3,538 USD
Bremen, Germany
Trusted Seller
20 liter pressure vessel made of stainless steel 316
- Manufacturer: Sartorius
max. allowable working temperature: 95 °C remarks: Hand hole approx. 80 x 100 mm; stainless steel 304 standing frame; vessel without bottom outlet
$540 USD
Bremen, Germany
Trusted Seller
400 liter pressure container, AISI304
max. allowable working temperature: 120 °C Volume: 400 liter | Max. excess pressure: 1,0 bar | Lower bottom: cone shaped bottom | Stand type: legs height adjustable | Diameter outside: 710 mm | Total height: 1.61...
$834 USD
Bremen, Germany
Trusted Seller
300 liter mobile pressure vessel, AISI304
max. allowable working temperature: 132 °C Volume: 300 liter | Vacuum: 1,0 bar | Max. excess pressure: 3,0 bar | Stand type: moveable on wheels | Quantity legs: 4 Piece | Ground clearance: 515 mm | Diameter outsi...
$2,397 USD
Bremen, Germany
Trusted Seller
300 liter pressure vessel, AISI304
max. allowable working temperature: 132 °C Volume: 300 liter | Vacuum: 3,0 bar | Max. excess pressure: 1,0 bar | Stand type: legs | Quantity legs: 4 Piece | Ground clearance: 290 mm | Diameter outside: 720 mm | C...
$3,832 USD
Bremen, Germany
Trusted Seller
60 (2 x 30) liter mobile double tank, Aisi 304
remarks: Double tank (2 x 30 liter); mobile frame, Aisi 304 with 4 plastic wheels
$2,938 USD
Bremen, Germany
Trusted Seller
ZAECKEL & ACHENBACH punch
- Manufacturer: Achenbach
- Stroke length: 10 mm
Punch, hand lever hole punch ZAECKEL & ACHENBACH Used!
$288 USD
Zschepplin, Germany
Trusted Seller
SYKON long hole punch
- Manufacturer: Lang
- Stroke length: 20 mm
Long hole punch, hole punch, hand lever hole punch SYKON 2859 used, tested !
$384 USD
Zschepplin, Germany
Trusted Seller
AsUtec isolated
isolated, simple -acting, committed Asutec ASM-160-EW-09-i-100 Supreme takes approx. 9 mm down in operation (spring -like) used, placed!
$180 USD
Zschepplin, Germany
Trusted Seller
Geppert mixer
agitator, agitator clepper Type Spr 4/3.0 Material (stirrer): stainless steel Motor: minor engine Type y3pe-100LB4 B5 Z-Ufdk 3.0 kw 1440 rpm 230/400V 3AC 50Hz 60 Hz - operation is possible! IP55 new! â
$1,379 USD
Zschepplin, Germany
Trusted Seller
MMZ1238
Clamping drive, clamping force generator, electric, WMW SgB 400 Hollow shaft: square profile 22 x 22 mm, depth: 45 mm 4x bore: Ø 8 mm, 2x bore: Ø 10 mm Motor: KR 71 z/4 0.4 kW 1380 rpm 220 / 380 V 3AC 50 Hz IP44 ...
$420 USD
Zschepplin, Germany
1981 sperr & Lechner Splek SLF II A 200 S
- Manufacturer: sperr & Lechner
FNP electric folding low pressure press SLF II A 200 from year of manufacture 1981 Description: The folding low-pressure press is used to press off the fold on the spine of the book and has two pressing stations ...
Dabergotz, Germany
Hunkeler ADP 45-70
- Manufacturer: Hunkeler
Double spindle press Hunkeler ADP 45-70 Double plate pressing 45x70cm, above or below, spindle guided on both sides 380 volt for pressing the books with cardboard cover after hanging, or to be used as a smoothing...
Dabergotz, Germany
1991 Peter van Ginkel L-90 Motor
- Manufacturer: Van Ginkel
Motor driven lithography press Peter van Ginkel L-90 motor Year of manufacture 1991 Previous owner was the Academy of Visual Arts Leipzig Paper size 900 x 1,500 mm, Machine dimension L 2670 x W 1.400 mm wide, Wor...
Dabergotz, Germany
Trusted Seller
1995 AMADA Arcade 210
- Manufacturer: Amada
- Model: ARCADE-210
- Stroke length: 80 mm
Type of machine: CNC punching and nibbling machine / CNC punch nibbler
Windhagen, Germany