Used Presses in Germany

Hydraulic Special purpose press 1000t - 15000t

• Manufacturer: ISGEC

New hydraulic Special purpose press ISGEC 1000t - 15000t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a ...

Hydraulic High speed press 300t - 2500t

New hydraulic high speed press ISGEC 300t - 2500t, individually tailored to your needs with attractive conditions, excellent quality and manageable delivery times. Tell us what you need and we will make a corresp...

Hydraulic double column press Loir Safe EDIMC 3000-600-320

• Manufacturer: Loir Safe

SN: 16.062, press force 30.000 kN, stroke 1.500 mm, weight without tool 450 t, tool spacing max. 5.000 x 2.500 mm, weight max. 60.000 kg, rapid lowering speed max. 400 mm/s, follow-up time 192 mm/s, table size 5....

screw press

Pressing force [kN]: 100 Table size [mm]: 600 x 100 Installation height [mm]: 200

1995 NATIONAL FORMAX FX35CF

• Manufacturer: Formax

Info: bushing cut-off , PKO , Forma packs | Diameter range: 11,8 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 3 – 45 mm | Shaft length under head: 50 mm | Output – pieces/min: 85 – 255 | Pres...

1986 SAKAMURA BPF560S

• Manufacturer: Sakamura

Info: bushing cut-off , PKO , IFO , Slug feeding possible | Diameter range: 16-34 mm | Number of dies: 5 | Number of stations: 6 | Cutting length: 210 mm | Shaft length under head: 180 mm | Output – pieces/min: ...

1976 HATEBUR BKA5

• Manufacturer: HATEBUR

Info: bushing cut-off , PKO 95 mm | Diameter range: 16-36 mm | Number of dies: 4 | Number of stations: 5 | Cutting length: 30 – 260 mm | Shaft length under head: 30 – 220 mm | Output – pieces/min: 35-70 | Press ...

1980 HATEBUR BKA3

• Manufacturer: HATEBUR

Info: PKO | Diameter range: 8-18 mm | Number of dies: 4 | Number of stations (incl. cut off): 5 | Cutting length: 150 mm | Shaft length under head: 130 mm | Output – pieces/min: 90 | Press power: 180 to

1999 SACMA SP260

• Manufacturer: Sacma

Info: bushing cut-off | Diameter range: 10,5 mm | Number of dies: 5 | Number of stations (incl. cut off): 6 | Cutting length: 85 mm | Shaft length under head: 65 mm | Output – pieces/min: 275 | Press power: 65t

1978 NEDSCHROEF BMV 7

• Manufacturer: Nedschroef

Info: bushing cut-off | Diameter range: 16-27 mm | Number of dies: 4 | Number of stations: 7 | Cutting length: 50-240 mm | Shaft length under head: 30-180 mm | Range of thread length: 95 mm | Max. width acros fl...

hydraulic press / 2 telescopical piston

• Manufacturer: hydraulic press / 2 telescopical piston

oil suction one side, lift way total ap. 5400 mm, cylinder outside Ø ap 160 mm, largest length ap. 3400 mm good

PEMSERTER SERIES 4 press-fit machine

Punch pressure 1.8 to 53.4 kN, drive type air, air connection max. 6 bar, projection 457, height 1,676 mm, width 690 mm, depth 940 mm, weight approx. 308kg

Hydraulic press Neff 4 S20Z

• Manufacturer: Neff

Pressing force [kN]: 40 Table size [mm]: 320 x 220 Installation height [mm]: 200 mm

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100