Manufacturer

  • Drill Press #190971

    No price - Midland, MI, USA Recently Added

      located in midland, mi 110 volt drill press on a 6 foot pedestal. comes with on/off switch and safety switch for chuck. mimi 5416

    • 2000 BECKWOOD MODEL 4P31F4238 31 TON HYDRAULIC PRESS #3611

      No price - Warren, MI, USA
      • Manufacturer: Beckwood
      • Stroke: 10″

      31 ton beckwood, 38" x 42" bed, 10" stroke, 19" daylight, 280ipm rpd, 46 ipm press, 330ipm ret, 7.5 hp, 2000

    • 2016 MILLUTENSIL MIL 142 DIE & MOLD SPOTTING PRESS #M5846

      No price - Warren, MI, USA Recently Added
      • Manufacturer: Millutensil
      • Capacity: 8,000 kg (17,636 Lbs)
      • Stroke: 1,300 mm (51″)

      70 ton millutensil mil-142, 47"x 55" plates, 57" dl, 51" str., flip down platen, roll out bolster, 2016 new in crate equipped with: upper platen 150 deg tilt lower platen tilt by +/- 70 deg 0-180...

    • 1974 REIS MODEL TUS90 40 TON (4) POST SPOTTING PRESS #3597

      No price - Warren, MI, USA
      • Manufacturer: Reis
      • Stroke: 24″

      40 ton reis tus-90, 36"x 48" plates, 39" d/l, 24" vt str, flip-down platen, up-acting, man roll out tbl w/hyd tilt, 1974 equipped with: flip down platten manual roll out table with hydraulic til...

    • KOMATSU 165 TON OBS SINGLE PT GAP PRESS #T1650

      No price - Warren, MI, USA
      • Manufacturer: Komatsu

      manufactured in 1986 capacity……………………………165 tons stroke………………………………..7.87″ shut height, sdau…………..17.72″ adjustment……………………….3.94″ bed area……………………………49.21″ l-r x 31.5″ f-b ram area…………………………..27.5...

    • TCS 110 TON HYDRAULIC SPOTTING PRESS #T1220

      No price - Warren, MI, USA
      • Manufacturer: TCS

      4 post design stoke……………42″ daylight……………64″ bed area……………70″ x 47″ ram area……………70″ x 47″ t-slotted ram and bed between posts (l-r)……………73″ diameter posts ……………5″ upper ram has booking (pivo...

    • EAGLE PH2-150-124-116 300 TON HYDRAULIC SPOTTING PRESS #M5574

      No price - Warren, MI, USA
      • Manufacturer: Eagle
      • Stroke: 78″

      year new……….2004 originally built as 150 ton, upgraded by oem to 300 ton capacity equipped with: rolling bolster

    • BURGMASTER "HOUDAILLE" 6-SPINDLE DRILL PRESS

      No price - Warren, MI, USA

        equipped with: 6-spindle indexing head 24" x 72" table baldor 1.5hp, 60/50 hz, 3 phase motor specifications: spindle head vertical travel: 25" motor voltage: 208/220/380/440 motor amperage: 312,...

      • POWERMATIC "HOUDAILLE" 6-SPINDLE DRILL PRESS

        No price - Warren, MI, USA
        • Manufacturer: Powermatic
        • Stroke: 6"

        equipped with: 2' x 8' table (6) spindles leeson motors specifications: maximum distance spindle to table: 24" stroke: 6" motor hp: 3/4, 220/440/3 phase spindle speeds: 1140/950 rpm

      • MODEL 37F K.R. WILSON 75 TON H-FRAME HYDRAULIC PRESS

        No price - Warren, MI, USA
        • Manufacturer: Wilson
        • Capacity: 75 Tons
        • Stroke: 8.5"

        equipped with: manual hydraulic pump hand lever operation specifications: capacity: 75 tons stroke: 8.5" diameter of cylinder rod: 2.75" distance between side frames: 42" depth of table (front-b...