Used Presses in Pennsylvania, United States

- 67 listings found
Sort by Price: Low to High | High to Low
  • 1997 Neff Not Listed Presses - Hydraulic

    • Manufacturer: Neff
    • Capacity: 12 Ton
    • Stroke: 6”

    12 ton neff hydraulic gap frame press model: speeds: 240 ipm advance 90 ipm press 146 ipm return equipped with: 5 hp motor, 1740 rpm, 230/460/3/60 atc controls atc 4-station rotary table load/unload unit 12 gallo...

    No price
    Venetia, PA, USA
  • 1969 Dennison Not Listed Presses - Hydraulic

    • Manufacturer: Dennison

      6 ton dennison hydraulic press two available 2.75" bore main cylinder 10" stroke 16" daylight 18" x 11" bed 6" throat depth 5 h.p. main motor 1800 rpm/440v/3ph/60hz 6 gpm 2" bolster with a u-slot 5" (l to r) x 8"...

      No price
      Venetia, PA, USA
    • 17078 1977 60 TON BLISS OBI PUNCH PRESS C-60

      • Manufacturer: Bliss

        60 ton bliss obi punch press price: loaded on truck, our warehouse, york, pa ………… $22,000.00 hmc stock no. 17078 machine serial no. 68168 machine model no. c60 new date: 1977 bed size: 21" x 32" ram face: 12"...

        $22,000 (USD)
        York, PA, USA
      • 17042 1979 60 TON BLISS OBI PUNCH PRESS C60

        • Manufacturer: Bliss

          60 ton bliss obi punch press price: loaded on truck, our warehouse, york, pa ………… $24,500.00 hmc stock no. 17042-p machine serial no. h68779 machine model no. c60 new date: 1979 bed size: 21" x 32" ram face: ...

          $24,500 (USD)
          York, PA, USA
        • ZTS LE-250

          • Manufacturer: ZTS
          • Capacity: 250.00 ton 2491 kN

          Height listed is above floor total height is 142 inches (3610 mm)

          No price
          Washington, PA, USA
        • 1984 ZTS LE-400 Gap / C Frame Cold Press

          • Manufacturer: ZTS
          • Capacity: 400.00 ton 3985 kN
          • Stroke: 6.30 in 160.00 mm

          Throat size 18 inch (450mm), height shown is above floor level, number of strokes admitted per minute 20

          No price
          Washington, PA, USA
        • 1985 MULTIPRESS FH20-20H HYD PRESS TK-20149

          • Manufacturer: MULTIPRESS
          • Capacity: 20 TONS
          • Stroke: 12″

          Dimensions: 48″ lr x 52″ fb x 90″ h weight: 3,200 lbs electrics: 460 volts, 3 ph, 60 cyc dual palm buttons parts counter

          $15,500 (USD)
          Bethlehem, PA, USA
        • DAKE 5-025 H-FRAME HYD PRESS DK-18138

          • Manufacturer: Dake
          • Capacity: 25 TONS

          Base: 43-1/2″ x 36″ height: 85″ weight: 1,000 lbs electrics: 460 volts, 3 ph, 60 cyc

          $7,450 (USD)
          Bethlehem, PA, USA
        • DENISON MULTIPRESS 2 TON HYDRAULIC PRESS

          • Manufacturer: Denison

            tonnage: 2t | electrics: 110v

            No price
            Ivyland, PA, USA
          • HPM 7000 Ton Hydraulic Press

            • Manufacturer: HPM
            • Capacity: 7000 Ton

            Hpm 7000 ton hydraulic press condition: very good fast traverse platen press, vertical down acting-open rod type with closed top pedestal type bed.  platen guided on 4 columns with 360 degree split bronze beari...

            $495,000 (USD)
            Morrisville, PA, USA