Used Straightening Presses

Knuth 5.4HP KHP 28 NC Bending and Straightening Press 131547

• Manufacturer: Knuth Werkzeugmaschinen
• Model: KHP28NC

Description The KHP 28 NC bending and straightening press is equipped with a punch and a 4-channel die with a height of 200 mm (7.87 in). This enables a wide range of materials, from thin sheet metal strips to th...

HERR VOSS 72" X .060"

• Manufacturer: Herr Voss

HERR VOSS 72"x.060" Precision Leveler, Stock# 13685JD. Used condition, max width 72", roll width 84", thickness capacity .016-.060, 19 straightening rolls, 13 backup rolls, roll diameter 1.156", and speed 50-250....

BRUDERER 18260-1000.2

• Manufacturer: Bruderer

SPECIFICATIONS: MAX MATERIAL WIDTH 260MM MATERILA TICKNESS RANGE 0.20-4 MM SPEED 0-60 M/MIN NO OF STRAIGHTENING ROLLS 19 DIAMETER OF ROLLS 18 MM READING OF MACHINE ADJUSTMENT 0.01 MM MAX VERTICAL DISTANCE ...

BRUDERER RM1825

• Manufacturer: Bruderer

SPECIFICATIONS: MAX WIDTH 9.84" # OF STRAIGHTENING ROLLS 19 (Backed up for precision leveling) DIAMETER OF ROLL .71" MATERIAL THICKNESS RANGE .008" TO .197" MINIMUM DIM OF WORK PIECE 1.02" POWER REQUIREMENT...

BRUDERER 18-260b

• Manufacturer: Bruderer
• Model: 18-260B

LEVELER - MODEL 18 260B MAX MATERIAL WIDTH 260 MM MATERIAL THICKNESS RANGE 0.20 TO 4.00 MM SPEED 0-60 M/MIN NO OF STRAIGHTENING ROLLS 19 DIAMETER OF ROLLS 18 MM READING OF MACHINE ADJUSTMENT 0.01 MM MAX VE...

4.7" X .05", BRUDERER No. 1012.1, 1973, Refurbished

• Manufacturer: Bruderer

Leveler has been refurbished: - Leveler was completely disassembled - All rolls cleaned & polished - Gear Box disassembled clean & assured to be in good condition - New Controls & All new wiring - New AC Inverte...

CWP 6 SPS

• Manufacturer: CWP

MAX STOCK WIDTH 6" MAX THICKNESS .062" MIN THICKNESS .010" NUMBER OF STRAIGHTENING ROLLS 17 DIAMETER OF ROLLS 15/16" CENTER DISTATNCE OF ROLLS 1-1/8" MOTOR VARY SPEED VOLTAGE 220/460 VOLTS WILL BE EQUIPPE...

30 Ton Peco Servo-Driven Straightening Press

• Manufacturer: PECO

Press Equipment Company, Built for Ford Motor Company for pressing bushings, guarding with light barriers, like new, except missing part of the computer.

1966 DAKE 19-251

• Manufacturer: Dake
• Capacity: 300,000 kg
• Stroke length: 406.4 mm

1966 Dake Model 19-251 Narrow Movable Fram Straightening Press - 300 Ton, 24" x 360" Table, and 16" Stroke. Maximum Contact Force Between Roller and Work...2,500 LBS **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIO...

Waddington,SMS6, Special zig zag feed transfer press applications 6.125 wide .040 Servo Driven

ID Number: 560 WADDINGTON Sure Fire ZIG ZAG SERVO ROLL FEED PRF-0600SFOPDZZ Super Multi Stroke Controller Model # SMS6 Zig Zag Feed Serial # 14817 SMS6 230 Volts 3 Phase 15 Amps Pacific Scientific Controller SC-1...