Used processing in osutoraria

Process Tank ss

Allen Bradley stainless steel tank, capacity 500 gallons. ASME MAWP 5 psi at 250F. Approx size 50" dia x 52" straight side with dish bottom/top. Legs 3 ft... Quantity (2) - priced separately

Ormont DU-44

• Manufacturer: Ormont
• Capacity: 40,000 kg

– Distance Between Side Housings: 63″ – Table Size: 30″ x 60″ – Cutting Head Area: 30″ x 60″ – Stroke: 4″ – Daylight Opening: 12″ – Floor to Top of Bed: 31″ – Horsepower: 5 H.P. – Dimensions (W x D x H): 86″ x 47...

Goodnature SX280 Squeezebox Press for Juice Processing #4183011

• Manufacturer: Goodnature

Goodnature Model SX280 Squeezebox juice press. Rated for 2.5 to 5 tons, 450 to 1,000 gallons per hour. Capable of producing up to 50,000 gallons per week. The press uses high pressure squeezing to run various pro...

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"

• Manufacturer: FH Maloney

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"

• Manufacturer: Wabash
• Model: G302-CX

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"

• Manufacturer: Wabash
• Model: 30-1212-4STMBX

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...

Brown Trim Press, Model T-300

• Manufacturer: Brown
• Model: T-300

Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.

12 Ton Carver Press, Model C, 6" x 6"

• Manufacturer: Carver

12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.

2021 Dr. Fritsch DSP 517 #51350

• Manufacturer: Fritsch

From Dr Fritsch Literature ~ “The DSP 517 is an automatic pressure sintering press for sintering metal-, ceramic- or resin-bonded workpieces. It works according to the principle of resistance heating by means of ...

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening

• Manufacturer: Brown

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels

Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press

• Manufacturer: US Filter / JWI
• Model: 1000G32-60-DYL

Used JWI/US Filter Model 1000G32-60-DYL 50 cu ft Poly plate and frame press. 61 Poly plates are 1000 X 1000 mm + the head and end plate. Center feed with 4 corner discharge. Has air over hydraulics closing system...

Aida DOUBLE END

• Manufacturer: Aida
• Capacity: 1,814.37 kg

AIDA 4,000 LB. DOUBLE END POWERED REEL Capacity .............. 4,000 lbs (each side) Rated width ........... 12" Machine is equipped with: - 180 degree rotation with locking mechanism - Full set of keepers

1500 mm US Filter Plate and Frame Press

• Manufacturer: US Filter / JWI

- 1500 mm plate and frame filter press - Manufactured by US filter - 210 cubic foot capacity - 120 non-gasketed plates - Automated hydraulics - Heavy-duty steel frame for mining and industrial applications - Offe...