Used boring bar boring machine

170 TON ELMES 24” X 26.5” UP-ACTING FOUR-POST HYDRAULIC PRESS

Press is equipped with stripper bars on the bed (3.25” bore; 4” stroke cylinders). Left to right between the bars is 24”. Front to back between the posts is 13” and overall is 26.5”. Left to right between the pos...

170 TON ELMES 24” X 26.5” UP-ACTING FOUR-POST HYDRAULIC PRESS

Press is equipped with stripper bars on the bed (3.25” bore; 4” stroke cylinders). Left to right between the bars is 24”. Front to back between the posts is 13” and overall is 26.5”. Left to right between the pos...

75 TON 16” X 16” UP-ACTING HYDRAULIC PRESS WITH TOP TRANSFER

Package includes two presses and one hydraulic unit with individual circuit for each press. 16” x 16” electrically heated platens. Clearance between tie-bars: 23.5” x 7.75”. Clearance between bushing blocks: 22” ...

30T 32.5″X32″, 30″ DAYLIGHT, 22″ STROKE, 4-POST, KARD

KARD MODEL FTP-30. F TO B BETWEEN THE POSTS IS 16”; OVERALL L TO R IS 60”; NOMINAL BED SIZE IS 32.5” X 32”. MAX DAYLIGHT OF APPROX 30”. CYLINDER IS APPROX 6” BORE WITH A 5.5” DIAMETER ROD AND 22” MAX STROKE. FULL...

270T 110″X59″, 16″ DAYLIGHT, 10″ STROKE, WEMHONER

• Manufacturer: Wemhöner

MODEL KT-M-15/28-240. CLEARANCE BETWEEN FRAME IS 126” L TO R X 37” F TO B. NOMINAL BED IS 110” X 59”. FOUR CLAMP CYLINDERS THAT ARE SINGLE-ACTING; APPROX 8” BORE; 6” DIA RODS; APPROX 10” MAX STROKE. ONE CENTER TR...

30T, 10″X10″, 6″ STROKE, 4-POST, ELMES

SET UP WITH 10” X 10” X 1.25” ELECTRIC PLATENS (0.5” INSULATION). RATED TO 550 F. CLEARANCES BETWEEN THE POSTS ARE 12” X 5.5”. NOMINAL BED SIZE IS 12” X 10”. DAYLIGHT IS ADJUSTABLE FROM APPROX 1.5” TO 10.5” BETWE...

30T 10”X10”, TWO PRESSES W/HYD UNIT, 29” DL., 22” STR.

TWO PRESSES ON A COMMON BASE WITH CONTROLS AND HYDRAULIC UNITS. 10” X 10” NOMINAL PLATEN SIZE. DISTANCE BETWEEN SLAB SIDES 11” L TO R, DAYLIGHT 29 ½”. APPROX STROKE 22”, DOUBLE ACTING MAIN RAM 5 ½” BORE, 4 ¼” ROD...

50T 101″X42″, 66″ DAYLIGHT, 52″ STROKE, 4-POST, PH

F TO B BETWEEN THE POSTS IS 28”. L TO R OVERALL IS APPROX 120”. NOMINAL BED SIZE IS 101” X 42”. TWO CYLINDERS: 5” BORE , 3.5” ROD, RATED AT 2546 PSI AND APPROX 52” STROKE. MAX DAYLIGHT IS 66”. FULLY GUIDED WITH 3...

118 TON 30.5” L TO R X 20” F TO B FRENCH OIL UP-ACTING 4-POST WITH OPTIONAL TRANSFER CYLINDER

36” L TO R OVERALL. 11” F TO B BETWEEN THE POSTS. THERE ARE TWO REMOVABLE STRIPPER BARS ON BED OF PRESS 18.5” APART. THE TOP PLATE (BELOW THE TRANSFER POT) IS 24” L TO R X 18.5” F TO B AND IS T-SLOTTED ALONG WITH...

650T 65”x130”, MULTIPLE DL, 37” STR, FRAME-TYPE, WEMHONER

• Manufacturer: Wemhöner

MACHINE #13670487. TYPE #HW05-590-2. OVERALL CLEARANCE L TO R IS APPROX 80.5”. APPROX DISTANCE BETWEEN “FRAMES” IS 28”. TWO OIL HEATED PLATENS THAT ARE APPROX 4.75” THICK. LOWER PLATEN HAS OPTIONAL CONTINUOUS GEA...

50T 101″X42″, 66″ DAYLIGHT, 52″ STROKE, 4-POST, PH

F TO B BETWEEN THE POSTS IS 28”. L TO R OVERALL IS APPROX 120”. NOMINAL BED SIZE IS 101” X 42”. TWO CYLINDERS: 5” BORE , 3.5” ROD, RATED AT 2546 PSI AND APPROX 52” STROKE. MAX DAYLIGHT IS 66”. FULLY GUIDED WITH 3...

30T, 9″ X 9″ , 6″ STROKE, 4-POST, CARVER/WABASH

• Manufacturer: Carver

PRESS IS SET UP WITH TWO-OPENINGS (CAN BE CHANGED TO ONE). NOMINAL BED/PLATEN SIZE IS APPROX 16.25” L TO R X 15” F TO B*; HOWEVER IT IS EQUIPPED WITH 4 (2 EACH OPENING) 9” X 9” X 1” ELECTRICALLY HEATED AND WATER ...

150T 17.75″ L TO R X 15.5″, 7″ MAX STROKE, 4000 PSI

LEMA MODEL HPL-200. ELECTRICALLY HEATED PLATENS: 17.75” X 15.5” F TO B X 2”; 8 CARTRIDGE HEATERS IN EACH. HEATED PLATE BEHIND BOTTOM PLATEN: 17.75” X 18.5”; 4 CARTRIDGE HEATERS; HINGED COVER. APPROX CYLINDER DIME...

30 TON WABASH 15” X 15” UP-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Wabash

Model G30H-15-B. Serial #9746. 15” x 15” electric platens: six heaters per platen (1/2” dia x 15”; 230 volt; 900 watt; 5400 watts per platen; rated to 800 F). Clamp cylinder is 5” bore with 6” max stroke and a 2”...