Machine Tools » Presses

Building Filters

Related Events

Live Now

L & N Industries, Inc. - Complete Steel Fabrication and Machine Shop

by The Equipment Hub

Online
Ends Sep 18th, 10:00 CDT
View event
82

Used exchangers

  • Trusted Seller
    2007 GREENARD HCA-100 75R7 HYDRAULIC

    2007 GREENARD HCA-100 75R7 HYDRAULIC C-FRAME PRESS

    • used

    • Manufacturer: Greenerd

    TONS OF RAM FORCE ADJUSTABLE FROM 20 TO 100 TABLE DIMENSIONS 46" L-R X 20" F-B THROAT 13" DAYLIGHT 24" STROKE ADJUSTABLE FROM 1" TO MAXIMUM 18" FLOOR TO TABLE 38" CLEARANCE BETWEEN RIBS UNDER PRESS BOLSTER 9" PRE...

    Los Angeles, CA
  • Trusted Seller
    2016 greenerd 4H-750-113 x 113-68X6R

    2016 greenerd 4H-750-113 x 113-68X6R

    • used

    • Manufacturer: Greenerd
    • Capacity: 750 GAL MINIMUM
    • Stroke: ADJUSTABLE TO MAXIMUM 104"

    DISTANCE REVERSAL PRESSURE REVERSAL PRE-SLOW DOWN CIRCUIT ELECTRONIC PRESS CONTROL CLOSED LOOP SPEED CONTROL 70-135 TON CUSHION (ADJUSTABLE) W/56? STROKE AND 69/113 IPM WATER-COOLED HEAT EXCHANGER ROBOT LOAD /UNL...

    Chicago, IL
  • Trusted Seller
    29.5 TON NEFF HYDRAULIC C

    29.5 TON NEFF HYDRAULIC C FRAME PRESS Z24044D

    • used

    • Manufacturer: Neff

    10" STROKE 24" DAYLIGHT 24" X 21" X 3" BED 31"LR x 16" FB RAM THERMAL TRANSFER HEAT Exchanger HYDRO GUARD PLUS CONTROL PALM BUTTONS LIGHT CURTIANS 10" THROAT 150-3000 PSI 60 GALLON RESERVOIR 2005 SPEEDS ADVANCE ...

    Monclova, OH
  • Trusted Seller
    42 TON NEFF C FRAME

    42 TON NEFF C FRAME HYDRAULIC PRESS Z24044F

    • used

    • Manufacturer: Neff

    10"STROKE 24"DAYLIGHT 31" X 16" RAM 24" X 21" X 3" BED HYDRO GUARD PLUS CONTROL THERMAL TRANSFER HEAT EXCHANGER PALM BUTTONS LIGHT CURTIANS 150-3000 PSI 10" THROAT 60 GALLON RESERVOIR 2005 4 POST GUIDED RAM 6" PI...

    Monclova, OH
  • Trusted Seller
    50 TON KARD 4 POST

    50 TON KARD 4 POST HYDRAULIC PRESS 16087A

    • used

    • Manufacturer: KARD

    MODEL #: ETP - 7550 SERIAL #: 1762 24" STROKE 38" DAYLIGHT 7" MAIN CYLINDER DIAMETER 86" x 51" BED 80" x 48" RAM 60" x 31" DISTANCE BETWEEN TIE RODS 6" TIE ROD DIAMETER 2350 MAXIMUM PSI RAM SAFETY LOCK WITH AIR...

    Monclova, OH
  • Trusted Seller
    2014 Wehrhahn 10-066-109

    2014 Wehrhahn 10-066-109

    • used

    • Manufacturer: Wehrhahn
    • Capacity: 1,500 Gallons

    Universal Mixer. Vertical Powder mixing vessel with 2HP top entering agitator and side door. Number 10-066-109, type 2619.000. Mfg 2014. Size 6 ft dia x 7 ft tall seam to seam, approx 1500 gallons. Flat top, ...

    Illinois, USA
  • DAKE C-FRAME HYDRAULIC PRESS

    DAKE C-FRAME HYDRAULIC PRESS

    • new

    • Manufacturer: Dake

    Standard Equippment: Adjustable Return Stroke Remote Pressure Adjustment Light Sensitive Thumb Pads Run-Jog Selector Oversized Heavy duty Hydraulic Cylinders Bolster Plate included Choose 208, 230, 460 or 575 vol...

    Chicago, IL
  • Trusted Seller
    150 Ton HTC Model 150-MS

    150 Ton HTC Model 150-MS Straight Side Press

    • used

    • Stroke: 0 - 7"

    Serial Number: : General Specifications Bed Area (Nominal): : 125" L-R x 49" F-B Slide Area: : 125" L-R x 49" F-B Distance Between Housings: : 125" L-R Distance Between Gibs: : 113" L-R Windows: : 37" L-R x 17.5"...

    Milwaukee, WI
  • Trusted Seller
    Denison 35 Ton Hydraulic Multipress

    Denison 35 Ton Hydraulic Multipress

    • used

    • Manufacturer: Multipress

    35 Ton capacity, 24"L x 34" T slotted die shoes, Guided ram, Safety latch on die shoe, Updated electrics & palm button controls, Single/Jog, Adjustable stroke via micro switches, Heat exchanger, Updated valves & ...

    $16,000 USD

    Get financing

    Est. $314/mo

    Minneapolis, MN
  • Trusted Seller
    165 TON Aida NC1-1500 (HD)

    165 TON Aida NC1-1500 (HD) SERVO PRESS

    • used

    • Manufacturer: Aida
    • Model: NC1-1500
    • Capacity: 165 TONS
    • Stroke: 9.84"

    The 165-ton Aida NC1-1500 (HD) Servo Press is a reliable and efficient machine, ideal for various industrial applications. This used model, serial number 10420-6087, offers a significant pressing capacity of 165 ...

    Eaton Rapids, MI
  • Trusted Seller
    Kelley 72" Edge of Dock

    Kelley 72" Edge of Dock Leveler, APS2000 Trailer Restraint, Dock Shelter, LED

    • new

    • Manufacturer: Kelley

    New LOT OF 2 Kelley KA Series Edge of Dock Leveler with Air Powered Lifting Mechanism, Kelley APS2000 Trailer Restraint System, Kelley Aqua-Shield Rain Sealing Dock Shelter, Turbo-ES Air Exchanging Dock Fan, LED ...

    $12,900 USD

    Get financing

    Est. $253/mo

    Bardstown, KY
  • 12T 12″X12″ 6″ MAX STROKE,

    12T 12″X12″ 6″ MAX STROKE, 4-POST, WABASH

    • used

    • Manufacturer: Wabash

    MODEL 12-1212-2TM. SERIAL #9019. SET UP WITH 12” X 12” X 3” ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15” X 15”. DAYLIGHT IS ADJUSTABLE FROM APPROX 6” TO 12”. CLAMP CYLINDER: ...

    Grand Rapids, MI
  • 12T 12″X12″ 6″ MAX STROKE,

    12T 12″X12″ 6″ MAX STROKE, 4-POST, WABASH

    • used

    • Manufacturer: Wabash

    MODEL 12-1212-2TM. SERIAL #9021. SET UP WITH 12” X 12” X 3” ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15” X 15”. DAYLIGHT IS ADJUSTABLE FROM APPROX 6” TO 12”. CLAMP CYLINDER: ...

    Grand Rapids, MI
  • 30T, WABASH 9″ X 9″

    30T, WABASH 9″ X 9″ (2-OPENING) UP-ACTING FOUR-POST HYDRAULIC PRESS

    • used

    • Manufacturer: Wabash

    WABASH MODEL G302H-9-X. SERIAL #10680. SET UP WITH FOUR 9” X 9” ELECTRIC PLATENS. (FOUR 500 WATT HEATERS EACH) RATED TO 600 F AND TWO 8” OPENINGS (COULD BE ADJUSTED UP TO TWO 11” OPENINGS). CLAMP CYLINDER: 5” BOR...

    Grand Rapids, MI
  • 30T, 9″ X 9″ ,

    30T, 9″ X 9″ , 6″ STROKE, 4-POST, CARVER/WABASH

    • used

    • Manufacturer: Carver

    PRESS IS SET UP WITH TWO-OPENINGS (CAN BE CHANGED TO ONE). NOMINAL BED/PLATEN SIZE IS APPROX 16.25” L TO R X 15” F TO B*; HOWEVER IT IS EQUIPPED WITH 4 (2 EACH OPENING) 9” X 9” X 1” ELECTRICALLY HEATED AND WATER ...

    Grand Rapids, MI
12345

Overview

Presses are machines used to apply pressure to materials in order to shape, mold, or compress them. They are commonly used in manufacturing and metalworking industries for tasks such as forging, stamping, and forming. There are various types of presses, including hydraulic, mechanical, and pneumatic, each suited for specific applications and materials.

FAQ

What should I consider when buying a used press?

Consider the type of press, its capacity, age, and overall condition. Check for any signs of wear and tear, and review maintenance records if available.

How do I ensure the press is shipped safely to my location?

Use a specialized transport service experienced in handling heavy machinery. Make sure the press is securely fastened and protected during transit.

What is the maintenance schedule for a press?

Regular maintenance includes checking hydraulic fluids, inspecting for leaks, and ensuring all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance intervals.