Building Filters
- Trusted Seller
MINSTER #90-800
- Manufacturer: Minster
- Model: 90-800
- Capacity: 800,000 kg
- Stroke length: 203.2 mm
Equipped With * Minster air clutch & brake (Rebuilt in 2020) * New drive gears * Tie rod cost iron frame construction * 2-Lubrication systems (Recirculating & Trabon grease) * Press controls, Relay Logic **Machin...
Vaughan, Canada - Trusted Seller
1982 1,200 ton Komatsu E4S 1200.05-90-MF.D
- Manufacturer: Komatsu
- Model: E4S
- Capacity: 1,200,000 kg
- Stroke length: 600 mm
Additional info: Maximum station capacity: 450 tons Stop time 2.90 ms Type Distance (Feed Stroke): 900mm Daylight: 1,020mm (Stroke down adjustment up) Feed Heat (from top of Bolster) 2 Dimensional: 495mm 3 Dimens...
Rockville Centre, NY - Trusted Seller
1980 1,200 ton Komatsu E4S 1200-06-70-MF-D Hydraulic
- Manufacturer: Komatsu
- Model: E4S
- Capacity: 1,200,000 kg
- Stroke length: 600 mm
Additional information: Two-dimensional speed at 10~25 spm, Three-dimensional speed at 10~20 spm Distance between dies (Feed-stoke): 700mm Die height (from the top of the bolster to the bottom of the slide): 1,10...
Rockville Centre, NY - Trusted Seller
Press Knuckle Joint Coining Minster
- Manufacturer: Minster
- Model: 90-1000
- Capacity: 1,000,000 kg
Capacity : 1000 tons, Stroke : 150 mm, Max. Shut height to bed : Approx. 425 mm, Bed area (RL x FB): 830 x 1000 mm, Ram slide area (RL x FB) : 640 x 500 mm, Ram adjustment : 125 mm, Bolster size (RL x FB) :...
United States - Trusted Seller
1989 ASAHI SUNAC AF-1414-3
- Manufacturer: ASAHI SUNAC
- Stroke length: 250 mm
Equipped With Die Case Die. x Length ( #1-#3): 100 x 200mm
North America 
2009 KOMATSU H2W200
- Manufacturer: Komatsu
- Model: H2W200
- Capacity: 220,000 kg
- Stroke length: 252.48 mm
2009 Komatsu H2W200 SSDC Press **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**
Phoenix, AZ- Trusted Seller
Imac Forging 750 ton
- Manufacturer: Imac
- Capacity: 750,000 kg
High Speed hydraulic Die Forging Press Capacity: 750 Ton New/ Unused, machine was never mounted... Stroke: 400 Max. opening: 810 Between coloms: 500 Table: 900 x 500 Power: 73 kW dimensions: 2800 x 2600 x 425...
Deinze, Belgium - Trusted Seller
Dake 150H #4926
- Manufacturer: Dake
- Model: 150H
- Capacity: 150,000 kg
Dake 150 Ton Hand Operated Hydraulic H-Frame Press, 150H Inventory # 4926 MPN # 907005 This hand operated hydraulic press features rapid ram return, by-pass hole, and rapid screw traverse of ram, along with an ad...
Baltimore, MD - Trusted Seller
Imac Forging 750 ton
- Manufacturer: Imac
- Capacity: 750,000 kg
High Speed hydraulic Die Forging Press Capacity: 750 Ton New/ Unused, machine was never mounted... Stroke: 400 mm Max. opening: 810 mm Between coloms: 500 mm Table: 900 x 500 mm Power: 75 kW dimensions: 2800 ...
Deinze, Belgium - Trusted Seller
Siempelkamp HP 800 Isothermal Press Complex
- Manufacturer: Siempelkamp
Fully automated, self-contained isothermal Press Complex for sale from highly motivated seller! We have been asked to find a buyer for this state-of-the-art isothermal press complex. The press complex is prist...
Marietta, GA - Trusted Seller
Dake 5-150 #4927
- Manufacturer: Dake
- Model: 5-150
- Capacity: 150,000 kg
Dake “Elec-draulic” 150 Ton Hydraulic H-Frame Press, 5-150 Inventory # 4927 MPN # 905150 Made in USA An advanced design, single-acting press with fingertip control Electric operation provides smooth, consistent p...
Baltimore, MD - Trusted Seller
Dake 5-075 #4925
- Manufacturer: Dake
- Model: 5-075
- Capacity: 75,000 kg
Dake “Elec-draulic” 75 Ton Hydraulic H-Frame Press, 5-075 Inventory # 4925 MPN # 905075 Made in USA An advanced design, single-acting press with fingertip control (Conversion to 440v is an additional cost.) Elect...
Baltimore, MD 
DAKE HYDRAULIC DURA-PRESS
- Manufacturer: Dake
Simple single acting cylinder design with 5 part oil seals for smooth operation and a tight seal. Welded heavy steel plate frame for greater rigidity. Efficient hand pump, conveniently located reduces operator fa...
Chicago, IL
DAKE H-FRAME HYDRAULIC PRESS
- Manufacturer: Dake
Standard Features: Hand Pump or Air or Electric Rapid Ram Return By-pass Hole Adjustable Table with self locking hoist Rapid Screw Traverse of Ram Movable Workload (except 25 ton) 2 Forged Steel V-Blocks & Table ...
Chicago, IL
DAKE HYDRAULIC DURA-PRESS 40 tons, 70 tons or 100 tons
- Manufacturer: Dake
Choose from 40 tons, 70 tons or 100 tons Double acting cylinder design with 5 part oil seals for smooth operation and a tight seal. Ram has lifting eyes to move table with chains. 2 Hp submerged motor drives 2 ce...
Chicago, IL