Used four

50 TON WABASH 18″ X 18″ FOUR-OPENING HYDRAULIC PRESS

• Manufacturer: Wabash

MODEL # PC-50-18-8TM. SERIAL #6406. CLAMP CYLINDER IS 7” BORE WITH A MAX STROKE OF 12”. SET UP WITH FOUR DAYLIGHT OPENINGS OF 3” EACH. TOTAL OF 8 ELECTRICALLY HEATED AND WATER COOLED PLATENS. FULLY GUIDED ON 2” D...

300 TON WABASH 45” X 25” UP-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Wabash

NOMINAL BED IS APPROX 45” L TO R X 25” F TO B. OVERALL L TO R IS APPROX 57.5” AND F TO B BETWEEN THE POSTS IS APPROX 11.5” (DISTANCE BETWEEN THE NUTS IS 42.5” L TO R X 8” F TO B)*. CLAMP CYLINDER IS A DOUBLE-ACTI...

30 TON WABASH 15” X 15” UP-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Wabash

Model G30H-15-B. Serial #9746. 15” x 15” electric platens: six heaters per platen (1/2” dia x 15”; 230 volt; 900 watt; 5400 watts per platen; rated to 800 F). Clamp cylinder is 5” bore with 6” max stroke and a 2”...

35 TON 45” X 26” DOWN-ACTING FOUR-POST HYDRAULIC PRESS

Ahaus Tool & Engineering. 45.75” L to R between uprights x 26” F to B overall. 16” F to B clearance between the uprights x 56” L to R overall. There is an open slot in the bed: 48” x 5.5”. Cylinder :10” bore; 7” ...

170 TON ELMES 24” X 26.5” UP-ACTING FOUR-POST HYDRAULIC PRESS

Press is equipped with stripper bars on the bed (3.25” bore; 4” stroke cylinders). Left to right between the bars is 24”. Front to back between the posts is 13” and overall is 26.5”. Left to right between the pos...

170 TON ELMES 24” X 26.5” UP-ACTING FOUR-POST HYDRAULIC PRESS

Press is equipped with stripper bars on the bed (3.25” bore; 4” stroke cylinders). Left to right between the bars is 24”. Front to back between the posts is 13” and overall is 26.5”. Left to right between the pos...

75T 18″X18″, FOUR 8″ DL, 13″ STROKE, 4-POST, TMP

MODEL 18X18-75T-EHWC. SERIAL #20090. SET UP WITH FOUR DAYLIGHT OPENINGS OF APPROX 3” EACH. CLAMP CYLINDER IS APPROX 8” BORE WITH 13” OF MAX STROKE. PLATENS ARE ELECTRICALLY HEATED WITH OPTIONAL WATER COOLING. TOP...

100 TON LAWTON 48” X 42” DOWN-ACTING FOUR -POST HYDRAULIC PRESS

• Manufacturer: Lawton

Lawtomatic. Serial #100921. 48” x 42” nominal bed size. 49” L to R x 31” F to B between the posts. 60” L to R overall. 12” bore cylinder with a 10” diameter rod and 36” max stroke. Approx 44” max daylight. Fully ...

200 TON VERSON 72” X 48” DOWN-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Verson

Model 200-HD2-72-YP. Serial #19908. 72” x 48” nominal bed size. Overall between the posts is 74” L to R x 34” F to B. Two 8” bore Miller cylinders: 6” dia rods; 54” max stroke; operating at 4000 PSI. Max daylight...

200 TON LAWTON 71” X 48” DOWN-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Lawton

Lawtomatic. Serial #2001360. 71” x 48” nominal bed size. Overall between the posts is 72” L to R x 35” F to B. 16” bore cylinder with a 14.5” dia rod and 54” max stroke. Daylight is approx. 68” (by removing 12” r...

40T 34″ L TO R X 39″, 28″ DAYLIGHT, 10″ STROKE, FOUR-POST

HESS MODEL 40-3238-10-18. S/N A3517. BETWEEN THE POSTS: 37” X 27”. BETWEEN THE GUIDE BUSHINGS: 34” X 24”. NOMINAL: 34” X 39”. CLAMP CYLINDER: PARKER 8” BORE (SERIES 3H; 5” DIA ROD; 3000 PSI) WITH 10” MAX STROKE. ...

150 TON LAWTON 60” X 48” DOWN-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Lawton

Lawtomatic. Serial #1501062. 60” x 48” nominal bed size. Overall L to R is 72” and 36” F to B between the posts.. 14.5” bore cylinder with a 12.75” diameter rod and 54” max stroke. Max daylight is approx. 68”. Fu...

250 TON VERSON 72” X 48” DOWN-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Verson

Model 250-HD2-72-4P. Serial #19592 72” x 48” nominal bed size. Overall between the posts is 74” L to R x 34” F to B. Two 8” bore cylinders: 6” dia rods; 54” max stroke; operating at 5000 PSI. Max daylight approx....

30T, WABASH 9″ X 9″ (2-OPENING) UP-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Wabash

WABASH MODEL G302H-9-X. SERIAL #10680. SET UP WITH FOUR 9” X 9” ELECTRIC PLATENS. (FOUR 500 WATT HEATERS EACH) RATED TO 600 F AND TWO 8” OPENINGS (COULD BE ADJUSTED UP TO TWO 11” OPENINGS). CLAMP CYLINDER: 5” BOR...