Used gearboxes

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening

• Manufacturer: Brown

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels

ANDRITZ-DUPPS 3620 SCREW PRESS 200 TPD

• Manufacturer: Andritz
• Model: 3620

105954 One (1) used Andritz-Dupps model 3620 horizontal stainless steel dewatering press. Driven by motor through a Falk gearbox. Capable of handling up to 200 TPD depending on the application.4% inlet consistenc...

Vincent Corporation Continuous Screw Press. Model CP-4

LOCATED IN JOLIET, IL - Used Vincent Corporation Continuous Screw Press. Model CP-4 Specs & Features: -Capacity 0.5-1 TPD dry solids or 150-500 lbs/hour -16" L X 9" W inlet opening -4″ screw of the press is drive...

2007 Goyum G-1500

• Manufacturer: Goyum

This model has been designed in a simple and symmetrical shape. Used as expeller or press. Ser no. 512 with 180HP ABB motor. Built 2007. Overall Machine Dimensions approx Length:3550 mm, Breadth:1300 mm, Heig...

Thune SP32L Screw Press #36863

• Manufacturer: THUNE

Thune Sp32l Screw Press, With 60 Hp Reliance Motor, 460 Volt, 1780 Rpm, Falk Gearbox

2000 SUTHERLAND SP2-D300-120-60-12

• Manufacturer: Sutherland
• Capacity: 330,000 kg
• Stroke length: 304.8 mm

This used 2000 Sutherland SP2-D300-120-60-12 is a robust 330-ton straight side mechanical press featuring a double crank and 8-point gibbing. Notably, the crown was rebuilt in 2019, accompanied by a remanufacture...

Lyle Vertical Trim Press, Model 152PV, New in 2005

• Manufacturer: Lyle
• Capacity: 35,000 kg
• Stroke length: 228.6 mm

Used Lyle Vertical Trim Press, Model 152PV, 2005 Extremely Low Hours !!! Moving Platen Driven By Servo Drive With Gearbox Linear Bearings 480/3/60 45.7 Amps Approximate Dimensions: 137" x 154" x 227"

66" MCKAY TENSION LEVEL LINE (USED)

• Manufacturer: Mckay
• Capacity: 22,679.6 kg

Line Includes: Coil Car Pit type Uncoiler 72" wide x 20" ID Drum 50,000 lbs Slide base 50kw drag generator Pinch Roll Entry Shear Entry Stitcher Side Trimmer w/ Scarp Baller Pinch Roll Entry Bridle Rolls 66" wide...

ANDRITZ DUPPS 3632 SCREW PRESS, 304 S/S RECONDITIONED

• Manufacturer: Andritz

105111 One (1) reconditioned Andritz Dupps dewatering screw press, Model 3632, T-304 stainless steel construction. With 40 HP motor, 3/60/460V, and Falk gearbox. Reconditioned and never put back into service

Press, Screw, Jones, Beloit, Mdl P-200, S/st, Pressmaster #S599070

• Manufacturer: Jones

Beloit Jones model P-200, Pressmaster, complete with vibratory shaker discharge. Unit has stainless steel contact parts and is offered completely reconditioned with new liner screens, new main bearings, rebuilt D...

Press, Screw, Jones, Beloit, Mdl P-225, S/st, 20 HP, #S732943

• Manufacturer: Jones

Jones vertical screw press, model P-225, type 2512, with all wetted parts being stainless steel. Unit equipped with 20 HP main drive thru gearbox, frac HP, drive on the shaker discharge assembly and air cylinder ...

Press, Screw, 14" Diameter, FKC, Refiner, RE-350 #5990959

• Manufacturer: FKC Screw Press

Stainless steel 350mm diameter screw refiner, previously used to refine fish paste for production of surimi. Product feeds through 4" diameter sanitary tri-clamp connection to screw feed area into refining area. ...

1988 MANZONI CR 160

• Manufacturer: Manzoni
• Model: CR160

Maximum slide pressure higher: 160 Ton. | Kinematics: Eccentric stroke gearbox | Push points: #1 | Sled size: 745x420mm. | Table size: 1200x650mm. | Mold light between planes: 620 mm. | Distance between shoulder...