Machine Tools » Presses

Search By Manufacturer

Search By Country

Building Filters

52

Used pitting machine

  • Trusted Seller
    Auction
    6' WIDE X 8' LONG

    6' WIDE X 8' LONG POWER RAMP MODEL LMP-6835-16 PIT STYLE MECHANICAL DOCK LEVELER, 35,000 LB.

      6' WIDE X 8' LONG POWER RAMP MODEL LMP-6835-16 PIT STYLE MECHANICAL DOCK LEVELER, 35,000 LB. CAPACITY

      Columbus, OH
      Visit Auction Website
    • Trusted Seller
      Auction
      6' WIDE X 8' LONG

      6' WIDE X 8' LONG POWER RAMP MODEL LMP-6835-16 PIT STYLE MECHANICAL DOCK LEVELER, 35,000 LB.

        6' WIDE X 8' LONG POWER RAMP MODEL LMP-6835-16 PIT STYLE MECHANICAL DOCK LEVELER, 35,000 LB. CAPACITY

        Columbus, OH
        Visit Auction Website
      • Trusted Seller
        1987 400 TON FUKUI BLANKING

        1987 400 TON FUKUI BLANKING PRESS. 72" X .128" X 70,000 LB SERVO FEEDLINE #0956723

        • Manufacturer: Fukui
        • Capacity: 31,751.44 kg
        • Stroke length: 254 mm

        PRESS: FEED SYSTEM: LOOPING PIT ROLL FEED UNIT AUTOMATIC FEED CO STACKERS BLANK STACKER STATION 1: BLANK STACKER STATION 2: LINE EQUIPPED WITH UPGRADED TOLEDO INTEGRATED TECHNOLOGIES CONTROL IN 2015 NOTE* FEED LI...

        Toledo, OH
      • Trusted Seller
        300 TON HYDRAULICO HYDRAULIC PRESS

        300 TON HYDRAULICO HYDRAULIC PRESS 19053A

        • Manufacturer: HYDRAULICO

        MODEL #: 300/100/15/1830-1220 SERIAL #: 2113 45" STROKE 65" DAYLIGHT 72.90" x 48.61" BED 72.90" x 48.61" RAM 3000 KN MAXIMUM PRESSING FORCE T SLOTTED RAM AND BOLSTER ALLEN BRADLEY PANEL VIEW 1000 CONTROLS PALM ...

        $179,500 USD

        Get financing

        Est. $3,378/mo

        Monclova, OH
      • 113T 29″X23″,12″ BORE, 18″ STROKE,

        113T 29″X23″,12″ BORE, 18″ STROKE, 4-POST

          7” F TO B BETWEEN THE POSTS; 41.5” L TO R OVERALL. 29” X 23” NOMINAL BED SIZE. 12” BORE SINGLE-ACTING RAM WITH APPROX 18” MAX STROKE. PORT IS APPROX 1.25” WITH A FOUR-BOLT FLANGE. FULLY GUIDED WITH 7” BUSHINGS ON...

          Grand Rapids, MI
        • 2011 MINSTER E2-1200-120 x 60

          2011 MINSTER E2-1200-120 x 60

          • Manufacturer: Minster
          • Model: E2-1200

          Preliminary Specifications Minster 2 Point Eccentric Shaft Straight-Side Transfer Press Model: E2-1200-120 x 60 1200 Ton Capacity 12" Stroke (305 mm) 44" Shut Height (SDAU) (1118 mm) 12" Slide Adjustment (305 mm)...

          Detroit, MI
        • 1997 MACRODYNE MPD500/200

          1997 MACRODYNE MPD500/200

          • Manufacturer: MACRODYNE

          Preliminary Specifications Macrodyne Straight Side Hydraulic MPD Deep Draw Press with Cushion Model MPD500/200 Year 1997 Press 500 Ton Pressing Capacity 36" Stroke 72" Daylight 36" Shut Height 96" LR x 60" FB Bed...

          Detroit, MI
        • 150T 28″X30.5″ , 34” DL,

          150T 28″X30.5″ , 34” DL, 24” STR., 4-POST, TRANS CYL.

            MODEL #IMA150-2820-CH. SERIAL #C-81470. PRESS HAS A DOWN-ACTING 10” MAIN RAM WITH AN INTERNAL JACK RAM. UP-ACTING TRANSFER CYLINDER. SET UP WITH 24” X 24” TEE-SLOTTED PLATES*. 34 ½” DAYLIGHT. APPROX 24” STROKE ON...

            Grand Rapids, MI
          • 150T 28″X30.5″ , 33.5” DL,

            150T 28″X30.5″ , 33.5” DL, 24” STR., 4-POST, TRANS CYL.

              MODEL #TCIMAX-150-2820-24. SERIAL #C-83173. PRESS HAS A DOWN-ACTING 10” MAIN RAM WITH AN INTERNAL JACK RAM. UP-ACTING TRANSFER CYLINDER. OVERALL CLEARANCE L TO R 28”, AND F TO B BETWEEN POSTS IS 20”. 33 ½” DAYLIG...

              Grand Rapids, MI
            • 350T 30”X42.5”, 23” DAYLIGHT, 15”

              350T 30”X42.5”, 23” DAYLIGHT, 15” STROKE, 4-POST

                DAYLIGHT 23”. APPROX STROKE 15”. 17 ½” DIAMETER SINGLE-ACTING MAIN RAM RATED AT 3000 PSI. 1” NPT PORT. 6” DIAMETER POSTS. FULLY GUIDED MOVING BOLSTER WITH 8” LONG BUSHINGS. OVERALL PLATEN SIZE 42 ½” L to R X 42 ½...

                Grand Rapids, MI
              • 150T 29.5″X24″ , 34” DL.,

                150T 29.5″X24″ , 34” DL., 18” STR., 4-POST, TRANSFER CYL.

                  MODEL #IMA150-450-30. SERIAL #C-83288. PRESS HAS A DOWN-ACTING 10” MAIN RAM WITH AN INTERNAL JACK RAM, AN UP-ACTING TRANSFER CYLINDER. 24” X 24” TEE-SLOTTED PLATES.* APPROX 29.5” L TO R BETWEEN THE POSTS; 13” FRO...

                  Grand Rapids, MI
                • 2008 AMINO DSP 100Y

                  2008 AMINO DSP 100Y

                  • Manufacturer: Amino
                  • Model: DSP 100Y

                  PRELIMINARY SPECIFICATIONS: AMINO HYDRAULIC DOWN ACTING SPOTTING PRESS MODEL DSP 100Y TIE ROD CONSTRUCTION YEAR 2008 112 TON CAPACITY (1000 kN) 56 TON RAISING CAPACITY (500 kN) 20 TON MAXIMUM DIE WEIGHT 10 TON MA...

                  Detroit, MI
                • Trusted Seller
                  1985 Clearing Niagara PN-400-120-60

                  1985 Clearing Niagara PN-400-120-60

                  • Manufacturer: Niagara
                  • Capacity: 440 kg
                  • Stroke length: 254 mm

                  Used Clearing Niagara PN-400-120-60. This pre-owned Hydraulic Press is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Clearing Niag...

                  $75,000 USD

                  Get financing

                  Est. $1,412/mo

                  Chicago, IL
                • 1992 PACIFIC 200-D8-48-96

                  1992 PACIFIC 200-D8-48-96

                  • Manufacturer: Pacific
                  • Model: 200-D8-48-96

                  PRELIMINARY SPECIFICATIONS: 200 TONS CAPACITY 24" STROKE OF SLIDE 36" DAYLIGHT OPEN 12" DAYLIGHT CLOSED 26" WINDOWS 96" LR X 48" FB BED SPEEDS: 335 IPM RAPID ADVANCE 0-35IPM PRESSING SPEEDS 289 IPM RAPID RETRACT ...

                  Detroit, MI
                • Waterbury Farrell PC212 Transfer Press

                  Waterbury Farrell PC212 Transfer Press 10" Stroke 6.5" Blank 130 Tons, Running

                  • Manufacturer: Waterbury Farrel

                  Waterbury Farrel PC 212 Transfer Press 10” Stroke 6.5” Max Blank Minster Clutch Max length of part 4.5” without special tooling 130 Tons Stamping force 32 Tons Max between Blank and Cup Speed is 4...

                  Watertown, CT
                1234

                Overview

                Presses are machines used to apply pressure to materials in order to shape, mold, or compress them. They are commonly used in manufacturing and metalworking industries for tasks such as forging, stamping, and forming. There are various types of presses, including hydraulic, mechanical, and pneumatic, each suited for specific applications and materials.

                FAQ

                What should I consider when buying a used press?

                Consider the type of press, its capacity, age, and overall condition. Check for any signs of wear and tear, and review maintenance records if available.

                How do I ensure the press is shipped safely to my location?

                Use a specialized transport service experienced in handling heavy machinery. Make sure the press is securely fastened and protected during transit.

                What is the maintenance schedule for a press?

                Regular maintenance includes checking hydraulic fluids, inspecting for leaks, and ensuring all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance intervals.