Used processing machines

Process Tank ss

Allen Bradley stainless steel tank, capacity 500 gallons. ASME MAWP 5 psi at 250F. Approx size 50" dia x 52" straight side with dish bottom/top. Legs 3 ft... Quantity (2) - priced separately

Ormont DU-44

• Manufacturer: Ormont
• Capacity: 40,000 kg

– Distance Between Side Housings: 63″ – Table Size: 30″ x 60″ – Cutting Head Area: 30″ x 60″ – Stroke: 4″ – Daylight Opening: 12″ – Floor to Top of Bed: 31″ – Horsepower: 5 H.P. – Dimensions (W x D x H): 86″ x 47...

HOSOTEC 8 Ton Press Depaneling machine PCB Separator PCB Singulation Model HS-PN-8

• Manufacturer: HOSOTEC

This is an 8 Ton HOSOTEC Press Depaneling machine PCB Separator PCB Singulation Model HS-PN-8 in Pristine Condition! WITH TOOLS (DIES)!! This unit can be demonstrated, please contact us! This PCB singulation p...

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12"

• Manufacturer: Wabash
• Model: G302-CX

30 Ton Wabash Genesis Press, Model G302-CX, 12" x 12" Used 30 ton Wabash Genesis platen press, model G302-CX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 4" daylight, 17" wide tie ...

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12"

• Manufacturer: Wabash
• Model: 30-1212-4STMBX

30 Ton Wabash Press, Model 30-1212-4STMBX, 12" x 12" Used 30 ton Wabash press, model 30-1212-4STMBX, 12" x 12" platens, steam heated, water cooled, (2) daylights, approximately 3" daylight spacing, 14.5" wide tie...

Brown Trim Press, Model T-300

• Manufacturer: Brown
• Model: T-300

Brown Trim Press, Model T-300 Used Brown model T-300 trim press, 11.75" x 37.5" wide cutting window, driven by ac motor, with canopy, control panel, 480 volt, serial# 8791.

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16"

• Manufacturer: FH Maloney

62.8 Ton FH Maloney 4 Post Molding Press, 16" x 16" Used FH Maloney 4 post molding press, 200 ton capacity rerated to 62.8 ton capacity, 16" x 16" electrically heated platens, 10.5" max daylight, 8" diameter main...

12 Ton Carver Press, Model C, 6" x 6"

• Manufacturer: Carver

12 Ton Carver Press, Model C, 6" x 6" Used Carver Bench Top Press, Model C, 12 ton compression, 6" x 6" platen, electrically heated upper platen, missing lower platen, hand hydraulic pump, Serial No. 25576-960.

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening

• Manufacturer: Brown

Brown Dual Fly Wheel Trim Press, 43" x 12.5" Opening Used 43" x 12.5" opening Brown dual fly wheel trim press with operator controls, AC motor with multi-speed gearbox belt driven to flywheels

Press Master CFP-20TON Hydraulic Press, 20 Ton Capacity, 230V, 3 Phase

Press Master CFP-20TON Hydraulic Press, 20 Ton Capacity, Voltage: 230 V, Phase: 3, Power: 10 HP, Amps: 30 A, Frequency: 60 Hz, Serial Number: 42004120010.

Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press

• Manufacturer: Netzsch
• Model: 800 MMI38

Used Netzsch Inc. Model 800 MM/I/38 poly propylene plate and frame press. S/N 400-691. Unit has 37 plates plus the head and end plate. Recessed plates are center fed and equipped with filter cloths. Has 38 chambe...

MINSTER 90

• Manufacturer: Minster
• Model: 90
• Stroke length: 76.2 mm
• Shut height: 419.1 mm

The MINSTER 90 Knuckle Joint Press, a robust machine suitable for demanding industrial applications, offers a force capacity of 250 tons. This used press is equipped with an air clutch and brake system, providing...