Machine Tools » Presses

Building Filters

50

Used robots

  • Trusted Seller
    2016 Arburg 630S 2500-1300

    2016 Arburg 630S 2500-1300

    • Manufacturer: Arburg
    • Model: 630S 2500-1300
    • Capacity: 275,000 kg
    • Daylight: 1,299.97 mm

    * Selogica Operating System * Core Pull * Robot Interface * Hydraulic Knockout * All Availalbe Disks and Manuals

    Hampshire, IL
  • Trusted Seller
    2016 REIS ROBOTICS TUS 130-200

    2016 REIS ROBOTICS TUS 130-200

    • Manufacturer: Reis Robotics
    • Stroke length: 1,800 mm

    FLECKENSTEIN Werkzeugmaschinen GmbH contact: Mr. Fleckenstein

    Kleinostheim, Germany
  • Trusted Seller
    2016 greenerd 4H-750-113 x 113-68X6R

    2016 greenerd 4H-750-113 x 113-68X6R

    • Manufacturer: Greenerd
    • Stroke length: 2,641.6 mm
    • Daylight: 4,572 mm

    DISTANCE REVERSAL PRESSURE REVERSAL PRE-SLOW DOWN CIRCUIT ELECTRONIC PRESS CONTROL CLOSED LOOP SPEED CONTROL 70-135 TON CUSHION (ADJUSTABLE) W/56? STROKE AND 69/113 IPM WATER-COOLED HEAT EXCHANGER ROBOT LOAD /UNL...

    Chicago, IL
  • Trusted Seller
    DIE MOLD SPOTTING TRYOUT PRESS

    DIE MOLD SPOTTING TRYOUT PRESS REIS ROBOTICS TUS 200 OK - 100 HWK

    • Manufacturer: Reis Robotics

    Spotting Press Warehouse number 200777 Make KINGS Model TUS 200 OK - 100 HWK YOM 1980 State 8 (on a scale of 1 to 10) Press Design Frame Design 4-column Sliding Table Yes Press Forces Total Nominal Power (Close) ...

    São Paulo, Brazil
  • Trusted Seller
    1000 Ton (1) & 600

    1000 Ton (1) & 600 Ton (4) CLEARING TANDEM PRESS LINE (USED)

    • Manufacturer: Clearing
    • Capacity: 1,000,000 kg
    • Stroke length: 609.6 mm

    #1 #2-4 Bed Size: 108" x 72" Model: SE4-600-108-72 Shut Height: 60" #5 Bed Size: 108" x 72" Model: SE4-600-108-72 Tonnage: 600 Tons Stroke of Slide: 24" Shut Height: 54" Adjust of Slide: 12" Bed Area: 108" x 72" ...

    United States
  • 1993 SANDRETTO EUROMAP 1960-350 Serie

    1993 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350

    • Manufacturer: Sandretto
    • Stroke length: 575 mm

    SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350 14.5 Tn Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.

    Marinha Grande, Portugal
  • 1988 SANDRETTO EUROMAP 1960-350 Serie

    1988 SANDRETTO EUROMAP 1960-350 Serie hp 350 S7 350

    • Manufacturer: Sandretto
    • Stroke length: 575 mm

    SANDRETTO EUROMAP 1960-350 Series hp 350 S7 350 14.5 Tn year 1988 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.

    Marinha Grande, Portugal
  • 1985 SANDRETTO EUROMAP 515-135 Serie

    1985 SANDRETTO EUROMAP 515-135 Serie 135

    • Manufacturer: Sandretto
    • Stroke length: 575 mm

    SANDRETTO EUROMAP 515-135 Series 135 5.7Tn year 1985 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.

    Marinha Grande, Portugal
  • 1995 SANDRETTO EUROMAP 430-120 Serie

    1995 SANDRETTO EUROMAP 430-120 Serie Otto 120

    • Manufacturer: Sandretto
    • Stroke length: 870 mm

    SANDRETTO EUROMAP 430-120 Series Otto 120 4.5Tn year 1995 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.

    Marinha Grande, Portugal
  • 6 x Mechanical Press Line

    6 x Mechanical Press Line

    • Manufacturer: Muller/W & M
    • Capacity: 800,000 kg
    • Stroke length: 762 mm

    1 x Muller (1979) 1600-ton Double Action Hydraulic Press 5 x Wilkins & Mitchell (1977-78) 800 ton 4 Point Single Action Mechanical Presses Complete press line, with two moving bolsters each press through side c...

    United Kingdom
  • 6 x Hydraulic/Mechanical Press Line

    6 x Hydraulic/Mechanical Press Line

      Quantity (1) MANUFACTURER Muller MODEL AND TYPE BZE 1600-36.1.1 Double Action Hydraulic Press SERIAL NO. 1991 YEAR OF MANUFACTURER 1979 Capacity 1600 tons Inner slide capacity 1000 tons Blankholder capaci...

      United Kingdom
    • Trusted Seller
      Tranemo DPA 250-25 CNC

      Tranemo DPA 250-25 CNC

      • Manufacturer: Tranemo
      • Capacity: 250,000 kg

      2 axis speed at 250 ton: 15 strokes/min speed at 88 ton: 36 strokes/min between columns long side: 2500 mm between columns short side: 800 mm This Tranemo features: - automatic hydraulic clamping system for the...

      Deinze, Belgium
    • Trusted Seller
      1989 SCHULER EBS2-800-3,5-700

      1989 SCHULER EBS2-800-3,5-700

      • Manufacturer: Schuler
      • Stroke length: 700 mm
      • Shut height: 1,475 mm

      2 x sliding tables extending sideways Handling robot between the presses Soundproofing cladding between the presses

      Gammertingen, Germany
    • Trusted Seller
      1984 SCHULER E4-600-3.35-762

      1984 SCHULER E4-600-3.35-762

      • Manufacturer: Schuler
      • Stroke length: 762 mm
      • Shut height: 1,322 mm

      Cushion in table pneumatic die loading charts for tool change ABB Handling robots for loading and unloading presses

      Gammertingen, Germany
    • Trusted Seller
      2012 KOENIG BAUER COMMANDER 80

      2012 KOENIG BAUER COMMANDER 80

      • Manufacturer: Koenig Bauer

      **MACHINE TO BE SOLD EXW/TAKEN ON SITE *** COMMANDER CT 598.5mm SPEED 40.000 Printing units • Plate and blanket cylinders in one line • DriveTronic dedicated drives for cylinders and inking units • RollerTronic r...

      Noisy-le-Sec, France
    1234

    Overview

    Presses are machines used to apply pressure to materials in order to shape, mold, or compress them. They are commonly used in manufacturing and metalworking industries for tasks such as forging, stamping, and forming. There are various types of presses, including hydraulic, mechanical, and pneumatic, each suited for specific applications and materials.

    FAQ

    What should I consider when buying a used press?

    Consider the type of press, its capacity, age, and overall condition. Check for any signs of wear and tear, and review maintenance records if available.

    How do I ensure the press is shipped safely to my location?

    Use a specialized transport service experienced in handling heavy machinery. Make sure the press is securely fastened and protected during transit.

    What is the maintenance schedule for a press?

    Regular maintenance includes checking hydraulic fluids, inspecting for leaks, and ensuring all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance intervals.