Used wire plating machine

LITTELL 208-17PDL

• Manufacturer: Littell

- MAX STOCK WIDTH 8" - DIAMETER OF ROLLS 1.25" - UMBER OF ROLLS 17 Machinery will be Refurbished - Includes: - Disassemble machine clean & polish all rolls - Replace Bearings for rolls - New Gear Reducer & New ...

BRUDERER 18-260b

• Manufacturer: Bruderer
• Model: 18-260B

LEVELER - MODEL 18 260B MAX MATERIAL WIDTH 260 MM MATERIAL THICKNESS RANGE 0.20 TO 4.00 MM SPEED 0-60 M/MIN NO OF STRAIGHTENING ROLLS 19 DIAMETER OF ROLLS 18 MM READING OF MACHINE ADJUSTMENT 0.01 MM MAX VE...

4.7" X .05", BRUDERER No. 1012.1, 1973, Refurbished

• Manufacturer: Bruderer

Leveler has been refurbished: - Leveler was completely disassembled - All rolls cleaned & polished - Gear Box disassembled clean & assured to be in good condition - New Controls & All new wiring - New AC Inverte...

100T 17″X15″, 5.5″-15.5″ ADJ DL, 7″ STROKE, 25 GAL TANK, 4-POST

MODEL 100-1515-SM. SERIAL #8912. SET UP WITH 15” X 15” X 1.25” STEEL PLATES EACH WITH 1” THICK INSULATION UNDERNEATH (NO HEATED PLATENS OR TEMP CONTROL). MAX CLEARANCE BETWEEN THE POSTS IS 18.5” L TO R X 9” F TO ...

50T 12″X18″, 2″ DAYLIGHT, 2″ STROKE, 10 GAL TANK

PRECISION-PLATE (SERIAL #1894) BY ANDERSON-VREELAND. 12” X 18” X 1.5” ELECTRIC PLATENS WITH STRIP HEATERS (5 PER PLATEN; 750 WATT). 8” BORE DOUBLE-ACTING CLAMP CYLINDER. APPROX 2” DAYLIGHT AND STROKE. GUIDED ON 1...

30T, WABASH 9″ X 9″ (2-OPENING) UP-ACTING FOUR-POST HYDRAULIC PRESS

• Manufacturer: Wabash

WABASH MODEL G302H-9-X. SERIAL #10680. SET UP WITH FOUR 9” X 9” ELECTRIC PLATENS. (FOUR 500 WATT HEATERS EACH) RATED TO 600 F AND TWO 8” OPENINGS (COULD BE ADJUSTED UP TO TWO 11” OPENINGS). CLAMP CYLINDER: 5” BOR...

MINSTER P2-150-54

• Manufacturer: Minster
• Model: P2-150

USED MINSTER P2-150-54 PIECE MAKER 150 TON GEARED SSDC PRESS CAPACITY: 150 TONS STROKE: 6″ MAX. SHUT HEIGHT TO BED: 23″ BED AREA: 54″ X 40″ (RL X FB) SPEED: 45-90 STROKES PER MINUTE RAM ADJUSTMENT: 4" MOTOR...

Minster Piecemaker P2-60-36 Stamping Press w 2" Stroke 14" SDAU CWP Servo

• Manufacturer: Minster
• Model: P2-60
• Capacity: 60,000 kg
• Stroke length: 101.6 mm

Minster Piecemaker P2-60 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition!* Later model Piecemaker press. Bought new by seller. * Speed range 125 - 375 SPM* 2" stroke* SDAU - 14" * 3" Adjus...

Minster P2-60-36 Piecemaker Straight Side Press 2" Stroke Littell Push Pull Feed

• Manufacturer: Minster
• Model: P2-60
• Capacity: 60,000 kg
• Stroke length: 76.2 mm

Minster Piecemaker P2-60-36 Straight Side Precision Stamping Press with 2" Stroke - Mint Condition!* Later model Piecemaker press. Bought new by seller. * Speed range 125 - 250 SPM* 2" stroke* SDAU - 13.5" * Shu...

25 Ton, BAIRD, No. 3-25, Brand NEW! This press was just build for Baird, 3" stroke, 1.75" Transfer Cam and Center Distance

• Manufacturer: U.S. Baird

U.S. Baird® #3-25 Automatic Multiple Transfer Press With motor drive arrangement including: Ortlinghaus air clutch and brake unit, with an operating range of 110 to 260 RPM. Ram stroke of 3 inches, Standard Ram V...