Used Printing in Brandenburg, Germany

1999 Grieser & Kunzmann GUK FA 74-6-KTL-F4 SA

• Manufacturer: Grieser & Kunzmann

with HHS cold gluing device for fold gluing Year of manufacture 1999 Gremser F4 flat pile feeder with trailing edge separator and MCS preselection counter 6 pockets 74cm, downstream slitter shaft mobile shed disp...

2002 GUK Grieser & Kunzmann FA 50-4-FL2-50 SA 520

• Manufacturer: Grieser & Kunzmann

Flat pile feeder FL-2-50 Folding unit with 4 pockets 54 cm infeed width downstream cutter block Preset counter MCS 106 Noise protection Shed display smallest fold: 26 mm Speed up to 30 000 sheets/hour or 150m/min...

1999 Grieser & Kunzmann GUK FA 36-4-SAF 36-SA 350

• Manufacturer: Grieser & Kunzmann

Preset counter MCS SAF 36 underfloor suction feeder with blade removal from below Folding unit with 4 pockets 36 cm infeed width downstream cutter block Noise protection mobile shed display SA Output up to 30.000...

2001 GBC AP-2 Ultra

• Manufacturer: GBC
• Model: AP2

with a tool rectangle 8,3x3mm for plastic binding

2002 Eurofold 245-235

• Manufacturer: Eurofold

Machine consisting of: -underfloor suction feeder with suction/blast air -falzagreggat 245 with 2 folding pockets 65cm -preset counter -shed display -vacuum pump Paper size: 90 x 120 mm (min.) Paper size: 50 x 65...

2002 Schneider EUROFOLD 235-121

• Manufacturer: Schneider

with underfloor suction feeder and motorized shed delivery and preset counter Folding agreggat 235 with two pockets Suction feeder 35 x 65 cm motorized shed delivery Alignment table Preset counter Vacuum pump Cre...

2009 Ernst Nagel Docufold

• Manufacturer: Nagel
• Model: DOCUFOLD

The pocket adjustment here is only by hand wheel from the outside and can be readjusted in seconds, also the donning and doffing is done on the same side. The folding rollers adjust themselves to the paper thickn...

2007 Bograma BS Eco 350-160-15

• Manufacturer: Bograma

Double Bridge Punch BS Eco 350-160-15 from 2007 Consisting of 1 infeed table with inline head or foot trim and then 2 Separating cut for multiple-up one long shed delivery SAB 550 for multiple use

Double nose shears for cutting Cito and GNU channel grooves

Double nose shears for cutting Cito and GNU channel grooves for efficient cutting of overhangs and for straight cutting of lines up to 40 x 1.42 mm in all-steel construction. The shear cuts 2 lugs at the same ti...

2008 Desta Desta BAS-STB 600

• Manufacturer: Desta
• Model: BAS-STB 600

Working width 600mm two pairs of press rolls height adjustable and inclinable inlet

2004 BVM A 3535

• Manufacturer: BVM

for automatic feeding of magazines, catalogs, blocks into the packaging machine Technical data size max: 350 x 350 x 30mm 350 x 280 x 50mm

2002 Mathias Baeuerle MB CAS 38-4-F

• Manufacturer: MB Bäuerle

Underfloor suction feeder Double sheet control and alignment table Total counter, preset counter Compressor 1. folding unit Multimaster CAS 38-4 with 4 folding pockets 38cm downstream cutter block motorized shed ...

2007 Mathias Baeuerle multimaster CAS 35-2 PBA

• Manufacturer: MB Bäuerle
• Model: Multimaster

Folding at the touch of a button in the A3 range Year of manufacture 2007 Computerized folding machine with two automatic buckle plates AFT-35 with deflecting ruler Total and preset counters PUR foam rollers PBA ...

2013 Agfa Avalon N8-24

• Manufacturer: Agfa

semi automatic 8up thermal CtP Agfa Avalon N8-24 S (PTR-8600S) with Agfa Apogee Rip Year 11-2013 only 4346 exposure hours speed: 23 plates per hour manual plate plant bridge Advant MDT 480 in line plate punch (fo...

2019 Heidelberg Stahlfolder BUH 36-6

• Manufacturer: Heidelberg

2.station Heidelberg Stahlfolder BUH 36-6 with MCT Koppelbox from 2019 (condition as new) six folding pockets with infeed width 36cm 33 Roll diameter Infeed height 82cm