Used Processing in Hiroshima, Japan

1991 Inoue Manufacturing DV-300
- Manufacturer: Inoue Manufactory
Motor: 3.7kw Material of wetted parts: SUS Container capacity: 330ℓ Hydraulic unit with spare tank x 1
Hiroshima, Japan
accumulator
An accumulator is a pressure vessel (accumulator) that stores the energy of a liquid (oil, water, etc.). It works similarly to a "battery" in electricity. In electricity, electrical energy is stored in a storage ...
Hiroshima, Japan
M Technique Co., Ltd. CLM - 3.7S
- Manufacturer: M Technique Co., Ltd.
Emulsifies and disperses multiple liquids that are difficult to mix under high temperature and pressure conditions. The closed container with a jacket has a capacity of 10 liters, a design pressure of FV to 0.8 M...
Hiroshima, Japan
Hitachi, Ltd. Cylindrical vertical type
- Manufacturer: 日立製作所
Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat
Hiroshima, Japan
2003 [YS Sten] Filtrate receiving tank (horizontal)
- Manufacturer: Wyeth, Sten.
0.27 m3 Teflon coating inside Material: Gluing section SUS | Quantity saved: １
Hiroshima, Japan
Iwai Machine Vertical cylindrical type
- Manufacturer: Iwai Machinery
Material: SUS316L Purchasing area: 60Hz | Material: SUS316L | Quantity saved: 1
Hiroshima, Japan
200L Cylindrical vertical type
Upper and lower mirror Material: SUS | Quantity saved: One
Hiroshima, Japan
420L Cylindrical vertical
Upper and lower mirrors φ700 × 1362 Made in 2004/8
Hiroshima, Japan
500 L cylinder vertical type
- Manufacturer: Cylindrical vertical type
Wetted part material: SUS Material: SUS | Quantity saved: One | Size: External dimensions: φ800×1000H (straight body)
Hiroshima, Japan
Showa Chemical Machine Cylinder Vertical
- Manufacturer: Showa Chemistry Machinery
Sealed structure, sanitary (ALLSUS), with casters Buffed and polished tank inner surface Jacket: No Agitator: No Shape: Upper mirror lower cone
Hiroshima, Japan
2012 Ogawara Works HDS-100
- Manufacturer: Okawara Works
Heating capacity: 110kw, Cooling capacity: 81kw Air blowing capacity: 3900Nm3/h, Heat source water volume: 231L/min Manufacturer's introduction page: Remarks Mainly composed of one CO2 hot air heat pump system, ...
Hiroshima, Japan
2012 [Mino Ceramics] Cart-type electric kiln
- Manufacturer: Mino
Operating temperature: 1000°C for normal use Utility (compressed air) Electric capacity: 51kw
Hiroshima, Japan
1997 Kyoritsu Koki 3000L
- Manufacturer: Kyoritsu Koki
Material: Wetted parts SUS304 With drawings Power: 11kw(eG3) | Material: Wetted part SUS 304 | Quantity saved: One
Hiroshima, Japan
Reaction can 3000L
- Manufacturer: Daiichi Bussan Co.
Material: Wetted parts SUS304 Power: 3.7kw | Material: Wetted part SUS 304 | Quantity saved: One
Hiroshima, Japan
1997 Noma Kikan 4000L
- Manufacturer: Noma Kikan
Material: Wetted parts SUS316 (coil: SUS316). Motor stored separately (d2G4 explosion-proof). Drawings available.
Hiroshima, Japan