Processing » Alabama

Building Filters

17

Used test in Alabama, USA

Lumenis External Purge ACCE01000 Air Compressor Pump - TESTED
- Manufacturer: Lumenis
Lumenis External Purge ACCE01000 Air Compressor Pump. Unit is in good condition with very minor wear from use (see pictures, comes as shown). Device powers on and pumps air, good pump. Manufacturer's Description:...
$199 USD
Fayette, AL
Sircle SRL-2700-HR 27" Desktop Roll Laminator - TESTED
- Manufacturer: Sircle
Sircle SRL-2700-HR 27" Desktop Roll Laminator. Units has some scuffs, scratches, and general wear from use (see pictures, comes as shown). Laminator powers on, heats to ready in around 10 minutes, Run, Reverse, a...
$925 USD
Fayette, AL
Nilfisk GM-80 HEPA Industrial Vacuum W/ Variable Speed Control (GM80)- TESTED
- Manufacturer: Nilfisk
- Model: GM80
Info on Vacuum: Nilfisk GM-80 GMPJ 115 110-120V | 50-60Hz | 1100W 9924 Nilfisk Advance Variable Speed Control Manufacturer's Description: The GM80's sturdy aluminum container means that the vacuum cleaner is almo...
$785 USD
Fayette, AL
Trusted Seller
Plate and Frame 61ft S-3-HJ-20 Heat Exchanger
- Manufacturer: Super Charger/Tranter
Head: CS | Size: 61 Square Feet | Type#: S-3-HJ-20 | Weight: 1,350lbs | #plates: 316 | Design temp.: 275 F | Test pressure (p.s.i.g.): 150 | Design pressure (p.s.i.g.): 100
Tuscaloosa, AL
Trusted Seller
Plate and Frame 10Ft S-3-HJ-S Heat Exchanger
- Manufacturer: Super Charger/Tranter
Head: CS | Size: 10 Square Feet | Type#: S-3-HJ-S | Weight: 1,200 lbs | #plates: 316 | Design temp.: 275 F | Test pressure (p.s.i.g.): 150 | Design pressure (p.s.i.g.): 100
$2,250 USD
Tuscaloosa, AL
Trusted Seller
Domnick Hunter A0 1950F High Pressure Compressed Air Filter, 230
- Manufacturer: Domnick Hunter
Filter code: A0 1950F | Element code: K330A0 | # of elements: 6 | Max work pressure: 16 bar | Working temp min: 0C | Working temp max: 120C | Hydro test pressure: 24 bar | Capacity: 93 litres | Inventory_number:...
$3,250 USD
Tuscaloosa, AL
Trusted Seller
American Heat Div./Alfa Thermal Inc. A-20-H; TVA CGGP Unit
- Manufacturer: American Heat Div./Alfa Thermal Inc.
Plate & Frame 4,309 ft A-20-H Heat Exchanger for sale.
Tuscaloosa, AL
Trusted Seller
Auction
Parker ET125M10LAK03R05FSDN0200A
- Manufacturer: Parker
(USED) Parker, Hydraulic Ram. Dimensions: 52" L x 13" W x 10" H Weight: 350 lbs *UNABLE TO TEST. WORKING CONDITION UNKNOWN. SOLD AS IS.*
Tuscaloosa, AL
Visit Auction Website
Trusted Seller
Auction
LL Kilns e23T-290
- Manufacturer: LL Kilns
(USED) LL Kilns Electric Kiln. Dimensions: 43" L x 30" W x 32" H Weight: 250 lbs *UNABLE TO TEST. SOLD AS IS. EXACT WORKING CONDITION UNKNOWN.*
Tuscaloosa, AL
Visit Auction Website
Trusted Seller
High Temp Tube Furnace
High Temperature Tube Furnace Sample Chamber and pre-heat chamber. Quartz Tube Can be operated using Lab View or Manually. Drawing and manuals on file. High Temperature Test Chamber for sale.
$18,500 USD
Get financing
Est. $363/mo
Tuscaloosa, AL
SAS Air Cleaning Specialist
- Manufacturer: SAS
SAS Air Cleaning Specialist in good condition with some wear from use, one of the filter holders is corroded (see pictures). Unit is tested and working. ALL QUESTIONS AND OFFERS WELCOME
$229 USD
Fayette, AL
Crown PCC-170 Supercardioid Condensor Boundary Microphone Open Box
- Manufacturer: Crown
Tested working microphones look to have never been used all have inventory numbers on the bottom. All have manuals except one. None come with mini XLR to full size XLR
$115 USD
Fayette, AL
Trusted Seller
National NH-5216 Hydraulic Sheer 16 Ga, 52.5" Width
- Manufacturer: National
National NH-5216 Hydraulic Sheer 16 Gauge Max for sale Actuated by Electric Foot Switch Up to 16 Gauge This item has been tested and cuts well with next to no feathering. Refer to picture of metal that was cut. N...
$4,750 USD
Tuscaloosa, AL
Trusted Seller
Westinghouse T6C 022 1R01 A5
- Manufacturer: Westinghouse
Unused Abex Denison T6C 022 1R01 A5 hydraulic pumps with 40 hp Westinghouse motors for sale. Abex Corp. / Abex Denison T6C 022 1R02 A5 Westinghouse, 40 hp, 1765 rpm, 324TY frame, 230/460v, TEFC Units appear to ha...
Tuscaloosa, AL
Nikon TS100 Inverted Microscope Illumination Pillar Condenser Mount
- Manufacturer: Nikon
Nikon TS100 Inverted Microscope Illumination Pillar Condenser Mount. Unit is used with general wear. Cord for lamp is modified and has 2 bare wires. Tested the assembly for continuity, should have no issues once ...
$65 USD
Fayette, AL

12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.