Processing » Australia

Search By Category

Search By Manufacturer

Search By State

Building Filters

4894

Used Processing in Australia

  • 2008 Alfa Laval M6-FJ Plate

    2008 Alfa Laval M6-FJ Plate

    • Manufacturer: Alfa-Laval
    • Model: M6

    Plate Heat Exchanger, Alfa Laval, M6-FJ, 260mmW x 780mmL Unit is a skid mounted plated heat exchanger complete with feed water pump. Previously used on chilled water application. Pump Details: Brand - Grundfos, M...

    Sydney, Australia
  • Aerzener GL12-4 Blower - Positive

    Aerzener GL12-4 Blower - Positive Displacement Rotary Type

    • Manufacturer: Aerzen

    Blower, Aerzener, GL12-4, IN/OUT: 100mm Dia Unit is a bare shaft positive displacement blower. Blower to suit approximately 18.5 Kw motor.

    Sydney, Australia
  • Pedrogil RN-20-10-B-5 Blower - Positive

    Pedrogil RN-20-10-B-5 Blower - Positive Displacement Rotary Type

    • Manufacturer: Pedrogil

    Blower, Pedrogil, RN-20-10-B-5, IN/OUT: 50mm Dia Unit is a bare shaft positive displacement blower. Inlet 50mm Dia Outlet 50mm Dia

    Sydney, Australia
  • Atlas Copco G15FFA10.5TM OP Rotary

    Atlas Copco G15FFA10.5TM OP Rotary Screw Air Compressors

    • Manufacturer: Atlas-Copco
    • Model: G 15

    Air Compressor, Atlas Copco, 77.5CFM Unit is a screw air compressor fitted with air dryer & receiver. Motor: 15kw, Voltage: 415volt Year: 2017, CFM: 77.5

    Sydney, Australia
  • Unknown

    Unknown

    • Manufacturer: Unknown

    This stainless steel mixer was given an overhaul recently with new mixer shaft bearings, shaft packing, electrics etc Details Dimensions , Length 1,830 M , x Width .690 m , x Depth .670 m Condition , overhaule...

    $9,389 USD

    Get financing

    Est. $184/mo

    Sydney, Australia
  • 2007 TETRA PAK Top Filling

    2007 TETRA PAK Top Filling Machine LFU TT3

    • Manufacturer: TETRA PAK Top Filling Machine

    The TETRA PAK LFU/TT3 is a dual lane horizontal form, fill and seal system with an output of up to 9,000 litres/hr. On this system, lane one was used for coffee creamer and lane two for 500ml of milk. When remo...

    The Rocks, Australia
  • Pro-Ali Belt (Incline Cleated) Conveyors

    Pro-Ali Belt (Incline Cleated) Conveyors

    • Manufacturer: Pro-Ali

    Incline Belt Conveyor, Pro-Ali, 450mm W x 3450mm L x 1200mm H Unit is a stainless steel mobile food grade incline belt conveyor. Conveyor is directly driven by a (0.75kW @ 44RPM, 415 Volt) electric gear motor. Co...

    Sydney, Australia
  • Pro-Ali Belt (Incline Cleated) Conveyors

    Pro-Ali Belt (Incline Cleated) Conveyors

    • Manufacturer: Pro-Ali

    Incline Belt Conveyor, Pro-Ali, 450mm W x 3600mm L x 1300mm H Unit is a stainless steel food grade incline belt conveyor. Conveyor is directly driven by a (0.37kW @ 27RPM, 415 Volt) gear motor. Conveyor has guide...

    Sydney, Australia
  • GEA/Safeline Belt (Incline Cleated) Conveyors

    GEA/Safeline Belt (Incline Cleated) Conveyors

    • Manufacturer: Safeline

    Incline Belt Conveyor, GEA/Safeline, 730mm W x 4780mm L x 2200mm H Unit is a stainless steel food grade heavy duty belt unloader. Unit was designed to handle frozen blocks. Belt is variable speed (10-35mtr/min). ...

    Sydney, Australia
  • Motorised Roller Conveyor, 1960mm L

    Motorised Roller Conveyor, 1960mm L x 1460mm W x 500mm H

      Motorised Roller Conveyor, 1960mm L x 1460mm W x 500mm H Unit is a motorised roller pallet turntable conveyor. Rollers are driven by a SEW 415 Volt gear motor & turntable is drivne by a 1.1kW, 415 Volt gear motor...

      Sydney, Australia
    • Pallet Roller Conveyor, 1550mm L

      Pallet Roller Conveyor, 1550mm L x 1550mm W x 400mm H

        Pallet Roller Conveyor, 1550mm L x 1550mm W x 400mm H Unit is a galvanised steel motorised pallet roller conveyor. Conveyor is driven by a (0.55kW @ 48 RPM, 415 Volt) electric gear motor. Adjustable feet.

        Sydney, Australia
      • Pallet Roller Conveyor, 1550mm L

        Pallet Roller Conveyor, 1550mm L x 1550mm W x 450mm H

          Pallet Roller Conveyor, 1550mm L x 1550mm W x 450mm H Unit is a galvanised steel motorised pallet roller conveyor. Conveyor is driven by a (0.55kW @ 48 RPM, 415 Volt) electric gear motor. Adjustable feet.

          Sydney, Australia
        • Pallet Diverter Conveyor, 2130mm L

          Pallet Diverter Conveyor, 2130mm L x 1110mm W x 500mm H

            Pallet Diverter Conveyor, 2130mm L x 1110mm W x 500mm H Unit is a pallet chain motorised conveyor turntable. Conveyor is driven by a (1.1kW @ 49 RPM, 415 Volt) electric gear motor. Turntable is driven by a (0.55k...

            Sydney, Australia
          • Pallet Chain Conveyor, 8840mm L

            Pallet Chain Conveyor, 8840mm L x 1070mm W x 360mm H

              Pallet Chain Conveyor, 8840mm L x 1070mm W x 360mm H Unit is a heavy constructed steel pallet chain conveyor. Conveyor is driven by a (0.75kW @ 42 RPM, 415 Volt) gear motor. Conveyor has aluminium checker plate f...

              Sydney, Australia
            • Pallet Chain Conveyor, 5670mm L

              Pallet Chain Conveyor, 5670mm L x 1070mm W x 360mm H

                Pallet Chain Conveyor, 5670mm L x 1070mm W x 360mm H Unit is a heavy constructed steel pallet chain conveyor. Conveyor is driven by a (0.75kW @ 4.9-25 RPM, 415 Volt) variable speed gear motor. Conveyor has a stee...

                Sydney, Australia
              3637383940

              Overview

              Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

              FAQ

              What should I consider when buying used processing equipment?

              Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

              How do I arrange shipping for processing equipment?

              Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

              What is the typical maintenance for processing equipment?

              Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.