Processing » Bavaria

Building Filters

19

Used force in Bavaria, Germany

450 liter twin shaft paddle mixer
Mixing volume: 450 liters Two mixed waves with paddles Stepless speed control Programmable operation A spout, mechanically operated Protective cover of the hopper including lifting device for standard troll...
Bavaria, Germany
Trusted Seller
Auction
NETSTAL ELION 800 - 130 Injection Molding Machine Netstal Elion 800 - 130
- Manufacturer: Netstal
Clamping force: 800 kN (approx. 80 tons) Screw diameter: 45mm Ejection force: 210 kN Discharge stroke: 129 mm Opening force: 800 kN Opening stroke: 0-350mm Mold installation height (tool height): 200 - 500 mm Pow...
Huisheim, Germany
Visit Auction Website
Trusted Seller
2006 DEMAG Ergotech Ergotech
- Manufacturer: Demag
- Model: Ergotech
Demag Ergotech Extra 200-600 plastic injection molding machine Type: Extra 200-600 Model: 2006 Screw diameter 45mm Injection pressure 1910 Injection molded part weight (PS) 291 Nozzle pressing force 60 kN ...
Neu-Ulm, Germany
Trusted Seller
Auction
DEMAG - Ergotech-compact 1000 - 430 - 1997 - Injection molding machine
- Manufacturer: Demag
- Model: Ergotech
Clamping force: 100 T Screw diameter: 40 mm Tie bar spacing
Huisheim, Germany
Visit Auction Website
Trusted Seller
Kistler Druckkraft Sensor
- Manufacturer: Kistler
for sale is a pressure force sensor from Kistler T. Number: HV8410-4015 Subject to prior sale, changes and errors!
Bellenberg, Germany
Trusted Seller
Kistler Kraftsensor
- Manufacturer: Kistler
for sale is a force sensor from Kistler T. Number: SN0000647548 TN-4576A5SC1 Subject to prior sale, changes and errors!
Bellenberg, Germany
Trusted Seller
Auction
ARBURG - Allrounder 370 C 1000-250 - 1994 - Injection molding machine
- Manufacturer: Arburg
- Model: Allrounder 370
Clamping unit: Clamping force maximum 1,000 KN Tool securing force / dto. increases maximum 50 / 500 KN Opening force / dto. increases maximum 35 / 250 KN Opening travel maximum 500 mm Tool height minimum 250 mm ...
Huisheim, Germany
Visit Auction Website
Trusted Seller
Auction
Arburg - Allrounder 370 C 1000-250 - 1994 - Injection molding machine
- Manufacturer: Arburg
- Model: Allrounder 370
Clamping unit: Clamping force maximum 1,000 KN Tool securing force / dto. increases maximum 50 / 500 KN Opening force / dto. increases maximum 35 / 250 KN Opening travel maximum 500 mm Tool height minimum 250 mm ...
Huisheim, Germany
Visit Auction Website
Trusted Seller
2022 FMS Kraftmesslager
- Manufacturer: FMS
for sale is a force measuring bearing from FMS T.number: 375NLMGZ203.375.17.H14 with angle stretcher Interim sale, Subject to changes and errors!
Bellenberg, Germany
Trusted Seller
FMS Kraftmesslager
- Manufacturer: FMS
for sale is a force measuring bearing from FMS T. Number: 200NLMGZ203.200.17 KF 40-104/1190455-104 Subject to prior sale, changes and errors!
Bellenberg, Germany
Trusted Seller
Auction
DEMAG - Ergotech system 600/370-120 - 2000 - Injection molding machine
- Manufacturer: Demag
- Model: Ergotech
Pressing force: 120 tons. Oil volume flow (Q max): 130l/min Hydraulic pressure (P max): 210 bar Power supply: 400 V
Huisheim, Germany
Visit Auction Website
Trusted Seller
2025 Falach CUBE 20
- Manufacturer: Falach
CE marking, very compact design The hydraulic briquetting presses of the CUBE series briquet different residues from wood processing such as sawing, planing and milling shavings as well as grinding dust into for...
Egenhofen, Germany
2018 Battenfeld VM R 200V (R1755)
- Manufacturer: Battenfeld
* Control unit: UNILOG B8 * Without granule separator * Operating hours: 13,467 h / 491 shots * Good condition, currently in storage. * Viewings possible at short notice by prior arrangement. Locking unit: VM 20...
Ansbach, Germany
2019 Ryll Z - Elevator MFB VAZN + Volta
- Manufacturer: Volta
was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II, for raw meat, designed to be mobile, effective width: 400 mm, feeding distance: 820 mm, gradient: approx. 60° - length: approx....
Bavaria, Germany
Trusted Seller
1996 Engel ES 1050/250 HLST
- Manufacturer: Engel
Manufacturer: Engel Model: ES 1050/250 HLST Year of Manufacture: 1996 Operating Hours: 77640 Clamping Force: 250t Machine weight : 23t Find more here - https://www.ucymachines.com/ Contact us at - sales@u...
Nuremberg, Germany

12

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.