Processing » Belgium

Building Filters

139

Used loading in Belgium

  • Trusted Seller
    Moulding machine Heinrich Wagner HRP

    Moulding machine Heinrich Wagner HRP 00

    • Manufacturer: Heinrich Wagner

    External dimension: Largeur: 700mm; Profondeur: 1200mm; Hauteur: 1630mm pressing power 6000kg with control desc and emergency stop Press head can be rotated by hand No jolting under pressing

    Amel, Belgium
  • Trusted Seller
    Moulding Machine ZIMMERMANN GV4

    Moulding Machine ZIMMERMANN GV4

    • Manufacturer: Zimmermann

    Year of manufacturing: 1973/ overhauling: 2006 Useful dimensions: Table-: 550mm With control board

    Amel, Belgium
  • Trusted Seller
    1988 Jolt squeeze moulding machine

    1988 Jolt squeeze moulding machine KÜNKEL WAGNER APM-S-2

    • Manufacturer: Künkel Wagner

    With c ontrol box AEG Automate Logistta A020 With two-hand control desk

    Amel, Belgium
  • Trusted Seller
    Moulding machine KÜNKEL WAGNER APM1

    Moulding machine KÜNKEL WAGNER APM1

    • Manufacturer: Künkel Wagner

    Outer dimensions: length: 850mm; width: 1100mm; height: 1870mm

    Amel, Belgium
  • Trusted Seller
    2010 ATLAS COPCO GA45P

    2010 ATLAS COPCO GA45P

    • Manufacturer: Atlas-Copco
    • Model: GA 45

    Capacity [m³/min]: 7.2 | Pressure [bar]: 7 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: 910 load hours | Weight [kg]: 1030 | Power [kw]: 45 | Hours (on hour meter): 3749 | Length [m]: 2.18 | Width...

    Waregem, Belgium
  • Trusted Seller
    Cooling conveyor ACME, 60000 mm

    Cooling conveyor ACME, 60000 mm x 1700 mm

    • Manufacturer: Acme

    Cooling conveyor: 60 m long, with hut and 2 vibrating generators (37 kW each) All conveyors have vibrating counterweights

    Amel, Belgium
  • Trusted Seller
    1998 INGERSOLL RAND MH22

    1998 INGERSOLL RAND MH22

    • Manufacturer: Ingersoll Rand
    • Model: MH22

    Capacity [m³/min]: 3.11 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: 21598 load hours | Weight [kg]: 508 | Power [kw]: 22 | Hours (on hour meter): 39174 | Ce mark: ok | Length...

    Waregem, Belgium
  • Trusted Seller
    1999 INGERSOLL RAND MH22

    1999 INGERSOLL RAND MH22

    • Manufacturer: Ingersoll Rand
    • Model: MH22

    Capacity [m³/min]: 3.11 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: 26369 load hours | Weight [kg]: 508 | Power [kw]: 22 | Hours (on hour meter): 46345 | Ce mark: ok | Length...

    Waregem, Belgium
  • Trusted Seller
    2018 ATLAS COPCO GA55

    2018 ATLAS COPCO GA55

    • Manufacturer: Atlas-Copco
    • Model: GA 55

    Capacity [m³/min]: 8,94 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: 2338 hours loaded | Weight [kg]: 1500 | Power [kw]: 55 | Hours (on hour meter): 8989 | Ce mark: ok | Lengt...

    Waregem, Belgium
  • Trusted Seller
    1999 INGERSOLL RAND MH22

    1999 INGERSOLL RAND MH22

    • Manufacturer: Ingersoll Rand
    • Model: MH22

    Capacity [m³/min]: 3.11 | Pressure [bar]: 10 | Tension [v/ph/hz]: 400/3/50 | Engine: Electric | Remarks: 16360 load hours | Weight [kg]: 508 | Power [kw]: 22 | Hours (on hour meter): 36116 | Ce mark: ok | Length...

    Waregem, Belgium
  • Trusted Seller
    1996 INGERSOLL RAND SIERRASH150AC

    1996 INGERSOLL RAND SIERRASH150AC

    • Manufacturer: Ingersoll Rand

    Capacity [m³/min]: 18.9 | Pressure [bar]: 10 | Tension [v/ph/hz]: 380/3/50 | Engine: electrical | Remarks: 831 load hours | Power [kw]: 150 | Hours (on hour meter): 1057 | Outside condition: Good | Ce mark: ok |...

    Waregem, Belgium
  • GN 46P

    GN 46P

    • Manufacturer: GN

    3 side seal pouch sealing machine 3 x220 V 50/60 Hz 2 position unwind with Boschert safety chucks 2 Tidland air shafts 76mm with powder brake on each shaft Edge guide with air sensor on each unwinding unit Ultras...

    Aalst, Belgium
  • Trusted Seller
    2009 Screw mixer with vibrating

    2009 Screw mixer with vibrating table and roller conveyor SIDER PROGETTI

    • Manufacturer: SIDER PROGETTI

    Consisting of: -Double arm mixer External dimensions: Useful dimensions: Axial dimensions Length between sand inlet and sand outlet: 3900mm (2400mm + 1500mm) -Vibrating table External dimensions: Length: 1700mm; ...

    Amel, Belgium
  • Trusted Seller
    Laborex 1500P I Pressure blasting

    Laborex 1500P I Pressure blasting cabinets I 2012

    • Manufacturer: Laborex

    We are offering this pre-owned Laborex 1500P Pressure blasting cabinets, manufactured in 2012 and currently located in Belgium. This pressure blasting cabinet offers reliable and efficient surface treatment perfo...

    $18,025 USD

    Get financing

    Est. $354/mo

    Belgium
  • Trusted Seller
    Laborex 1250P I Pressure blasting

    Laborex 1250P I Pressure blasting cabinets I 2020

    • Manufacturer: Laborex
    • Model: 1250P

    We are offering this pre-owned Laborex 1250P Pressure blasting cabinets, manufactured in 2020 and currently located in Belgium. This pressure blasting cabinet offers efficient and precise surface cleaning perform...

    $17,443 USD

    Get financing

    Est. $343/mo

    Belgium
45678

Overview

Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

FAQ

What should I consider when buying used processing equipment?

Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

How do I arrange shipping for processing equipment?

Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

What is the typical maintenance for processing equipment?

Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.