Used controller in Belgium

2000 Gassing unit LÜBER LW FDA-825, 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...

Dust Collector NEUBERG JKE26, 4000 m³/h

• Manufacturer: NEUBERG

With pneumatic cleaning, 4,5 bar Filter hoses from polyester needle felt, 550 gr/m² Exhaust MEB, typ CHB 13 M8 Filter surface 25m² With dust bucket Without control box With control unit for cleaning and manometer

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Pneumatic Hammer HITACHI, HS5

• Manufacturer: Hitachi

With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Tecma Pack Evcomptur 600

• Manufacturer: Tecma Pack

Cartoning Line with Nordstrom Problue 4 Hot Melt System, Schneider Control Panel and Associated Conveyor(H Dessert Line)

2010 CIP Unit

• Manufacturer: APV

Mini CIP Unit With 3 Tanks, Pumps,Flow Meter and Siemens Touch Screen Control Panel(B1)

2007 Waldner Dosomat

• Manufacturer: Waldner
• Model: DOSOMAT

Cup Filler with Alloy or Plastic Film Sealer with Siemens Simatic Multipanel Touch Screen Control Panel(H Dessert Line)

2006 Waldner Dosomat

• Manufacturer: Waldner
• Model: DOSOMAT

Cup Filler with Alloy or Plastic Film Sealer with Siemens Simatic Multipanel Touch Screen Control Panel(H Dessert Line)