Used loading in Belgium

1991 Fuel heated rotary furnace SOGEMI 3 t, OXYGAZ, tiltable

Fuel heated rotary furnace hydraulic station for loading and repairing lining With burner oxygen-gas 1,5 MW (1500 kW) With hydraulic group, with chassi for failover With control cabinet

Rubberbeltconveyor 3950 mm x 800 mm (1,2 m/s)

Drum side of the motor bloc width 950 mm, Ø 400 mm Roller tensioner: width 950 mm, Ø 400 mm, U-shaped structure With loading protection, with urgency stop

1982 Moulding machine HEINRICH WAGNER EFM4, 4 pillars

• Manufacturer: Heinrich Wagner

Load: 1500 kg shaker, demolding stroke: 450 mm Pressing stroke: 250 mm, moulds up to 1200 mm x 1000 mm x 400 mm Stripping roller

Steep belt conveyor BÖRGER&CO length: 9,7m

• Manufacturer: BÖGER&CO

External dimensions: Length: 1050mm; Width: 1100mm; Height: 800mm Usable dimensions: Length: 9700mm; Width: 650mm (outside), 550mm (inside) With loading hopper Belt with corrugated edge

2010 Dryer Black & White Trockner DT 60 G

• Manufacturer: Black & White

Complete Black and White 13 x 50kg CBW tunnel system (made in Germany, built by Transferon) consisting of: • Transferon 13 x 50kg tunnel from 2010 • 50kg press from 2010. • Transferon 2x dryers 50kg gas from 2...

2010 Dryer Black & White Trockner DT 60 G FOR PARTS

• Manufacturer: Black & White

Complete Black and White 13 x 50kg CBW tunnel system (made in Germany, built by Transferon) consisting of: • Transferon 13 x 50kg tunnel from 2010 • 50kg press from 2010. • Transferon 2x dryers 50kg gas from 2...

1997 EIRICH mixer R 11, 300 l max .5-6t/h

• Manufacturer: Eirich
• Model: R11

With sand loading hopper and 1 additive hopper With EIRICH control board SIMATIC S5 With EIRICH water dosing and seperate control board With hydraulic unit (with new control board and new water dosing on request)

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

2010 Dryer Black & White Trockner DT 60 G

• Manufacturer: Black & White

Complete Black and White 13 x 50kg CBW tunnel system (made in Germany, built by Transferon) consisting of: • Transferon 13 x 50kg tunnel from 2010 • 50kg press from 2010. • Transferon 2x dryers 50kg gas from 2...

1989 Vibrating shake-out drum FDC, type RV12-42, 5600 mm x 1200 mm

In good condition Output 20 t/h Passage time for the dark sable 7 min With vibrating conveyor for loading of 4000 x 900 mm Motor tube 2 x 3,5 kW, regulation of the motorized incline 2 kW, de 0 - 3°

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Induction furnace INDUCTOTHERM 3 x 6t

• Manufacturer: Inductotherm

With control 5140kVA; 4500kW; 200Hz With 2 transformers Primary voltage: 10500V; Secondary voltage: 595V; 50Hz; 2570kVA Melting and holding warm possible at the same time With loading machines With water pump sta...

Alu melting furnace STRIKO, gas fired, content 1000 kg

• Manufacturer: Striko

Furnace for natural gas with 2 burners for melting chamber and 1 for holding and casting chamber With hydraulic tilting, with loading skip, with control box, with chimney With gas installation KROMSCHRÖDER Conten...

Lining spraying unit SAS 3

Type : III E7, serial number: 3190 With loading container, hand slide valve for lift track and long flex pipe Filling hole wicht pneumatic clap Spraying system over screw With motor and frequency converter On 3 w...