Used machine center in Belgium

Fettling Centre MAUS SAM 1200-U

• Manufacturer: Maus

Brand: MAUSType: SAM1200 With 1 vertical grinding disc With 1 horizontal grinding disc With 2 internal grinding tools With FANUC robot (celle) With 2 motorised roller conveyors

2008 Fettling Centre MAUS SAM300 S

• Manufacturer: Maus

Cast part: length 300mm, width 300mm, height 250mm, Ø 360mm, weight 15 kg With 1 vertical cutting/grinding disc With 1 vertical grinding disc With 1 inside grinding tool

Small bucket elevator, center distance 3750 mm

• Manufacturer: SISSON

Engine: 0,75 kW, brand SEW, 220/380 CV, type Getriebemotor, 1400/110 U/min Lifting height 3650 mm, from the floor With new inlet cone

Small bucket elevator, center distance 3750 mm

• Manufacturer: SISSON

Lifting height 3650 mm, from the floor With new inlet cône

Rubber belt conveyor VEB/DDR 2500 mm x 500 mm

- center distance 2150 mm; length 2800 mm - center distance 2400 mm; length 2900 mm - center distance 2500 mm Tube construction, drum Ø 300 mm

Continuous mixer WÖHR, 20 - 40 t/h, articulated mixing screw

• Manufacturer: Wöhr

Sand inlet height: 3058 mm, sand outlet height: 2000 mm Center distance arm1: 5000 mm, center distance arm2: 2000 mm First arm rotation by electric motor, second arm rotation by hydraulic motor

Rubber belt conveyor, width 50 0mm

Drum motor ABM, 0,75 KW, 1 hp, 220/380 V In good condition Band width: 500 mm, center distance: 2550 mm, on 4 rubber wheels Adjustable in the height, can swing right and left

Bunker, ± 2 m³, with discharging conveyor

External dimensions: length 4400 mm, width 1650 mm, height 2050 mm Dimensions of belt: length center distance 3650 mm, width 600 mm Plastic lining inside the bunker Drive via V-belt to slip on gear box

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

Fastloop with vibrating table

Fastloop consisting of: Vibration table: Dimensions: Length: 1000mm; Width: 1000mm; Height: 650mm roller width: 675mm; center distance: 225mm; Ø roller: 90mm With relay control 4 air bars End switch under the tab...

Screw conveyor 1600 mm, Ø 150 mm

Tube Ø 150 mm Motor BAUER, type: DKF941A/241; 1,5 kW, 2 hp, 380 V, 1420/185 rpm exit Center distance between in- and output 1600 mm Entrance Ø 400 mm reduced With 2 inspection doors 400 mm x 150 mm With pipe Ø 15...

Extraction belt conveyor without feet 3900 x 600mm

Motor LEROY SOMER V112 M1, serial number 70664, 4 kW, 1440 rpm, 220/380 V With scraper on the belt, between axle of the rolls 3900 mm Ø 400 mm drive roll Ø 90 mm small rolls Motor drive to the gearbox by 3 belts ...

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

1100 mm x 700 mm x 200 mm, 116 kg, welded

With trunnions With oval and round rings, Ø 22 mm With 4 rod handles