Used machine polish in Belgium

Double polishing machine on leg

With suction hood 1 speed In-house poduction Motor: 2,7 CV, 380 V

Double polishing machine TH.DEHAYBE

With suction cap, 2 speeds, by pulley with level Motor: 5,5 CV, 220/380 V,

Double polishing machine REMA, type DPN

• Manufacturer: Rema

2,2 - 3 kW; 1450/2900 rpm; 220 V 2 electronic speeds

Sample polishing machine, 1 disc, without water

Type: DP9, serial number: 19788 220 V, 250 rpm, 75 Watt With speed regulator 2 speeds With 1 metallic disc Ø 200 mm

Double polishing machine REMA, type DP15

• Manufacturer: Rema

0,9 /1,3 kW; 1450/2900 rpm; 380 V Ø attachment 20 mm; width 35 - 40 mm 2 speeds Only the right side is usable

Vibration polishing machine, Ø 1590 mm, PARKER / RÖSSLER

• Manufacturer: Parker

Outside Ø 1590 mm, h. 1250 mm On round foot Weight: 1200 kg | Useful dimensions: Ø 1500 mm, h. 630 mm

Sample polishing machine ESCIL, 1 disc, Ø ± 220mm

Motor: LEROY SOMER, type ASYNCHROON; 0,25/0,12 hp; 1500/750 rpm; , treephase V, 50 Hz, 10 A With water sprinkling 2 speeds

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

Vibrating polishing machine, brand RÖSSLER 2.2x0.6 m.

Type: R1000LT, serial number: 145/77 In good condition 2 vibrating motors, 220 / 380V With stainless steel basin, agitator, pre-separator With sludge pump (compressed air) Tank with polyurethane filter

Polisher grinder MECAPOL PRESI, Ø 200mm

• Manufacturer: Presi

External dimensions: Length: 350 mm; Width: 380 mm; Height: 200 mm With water sprinkler With 7 additional plates

Samples polishing unit 1 disc

Equipement for polishing onder water With drain hose without own water tap With switch, cable and connector With one disc Ø ± 250 mm

Double samples polisher JEAN WIRTZ

• Manufacturer: JEAN WIRTZ

Dimensions: Length: 920mm; Width: 630mm; Height: 330mm Also suitable for wet polishing 380V, 50Hz, 0,85kW, 3 phases

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

With protection/extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer

Bench polisher 1side on the right

Motor WEG, 5,5 kW; 955 rpm; 380/660 V With protection/ extraction hood stainless Extraction rocket Ø150mm Without control Bore Ø100mm With dust drawer