Processing » Bern

Building Filters

207

Used Processing in Bern, Switzerland

  • Trusted Seller
    2014 DONALDSON DMC-MMB

    2014 DONALDSON DMC-MMB

    • Manufacturer: Donaldson / Torit / DCE
    • Model: DMC-MMB

    Voltage 50 hz 3x: 400 Volt | Installed power: 1 kW | Weight: 75 kg | Length: 1100 mm | Width: 650 mm | Height: 900 mm

    Brügg, Switzerland
  • Trusted Seller
    BREMOR 150.91.2.40.100

    BREMOR 150.91.2.40.100

    • Manufacturer: Bremor

    Machine's weight about: 800 kg | Length: 1500 mm | Width: 1200 mm | Height: 2400 mm

    Brügg, Switzerland
  • Trusted Seller
    2013 ELBARON RON/A 100 SV

    2013 ELBARON RON/A 100 SV

    • Manufacturer: ELBARON

    Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.315 kW | Weight: 51 kg | Length: 550 mm | Width: 500 mm | Height: 600 mm

    Brügg, Switzerland
  • Trusted Seller
    2015 ELBARON RON/A 100 SV

    2015 ELBARON RON/A 100 SV

    • Manufacturer: ELBARON

    Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.315 kW | Weight: 51 kg | Length: 550 mm | Width: 500 mm | Height: 600 mm

    Brügg, Switzerland
  • Trusted Seller
    2008 ELBARON RON/A 60 SV

    2008 ELBARON RON/A 60 SV

    • Manufacturer: ELBARON

    Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.38 kW | Weight: 22 kg | Length: 700 mm | Width: 470 mm | Height: 380 mm

    Brügg, Switzerland
  • Trusted Seller
    ARO P 480/1250 E2

    ARO P 480/1250 E2

    • Manufacturer: ARO

    Tank contenance: 250 l | Flow / duty: 80 l/min | Paper filter width: 480 mm | Voltage 50 hz 3x: 400 Volt | Length: 1700 mm | Width: 620 mm | Height: 690 mm

    Brügg, Switzerland
  • Trusted Seller
    KIKUTA KCF-301

    KIKUTA KCF-301

    • Manufacturer: KIKUTA

    Weight: 500 kg | Length: 1400 mm | Width: 1000 mm | Height: 2300 mm

    Brügg, Switzerland
  • Trusted Seller
    no-image_en.png

    SAND BLASTER “BREMOR” TYPE UNIBLOC 200

    • Manufacturer: Arena

    S/no.200.REV.97.2.35.80, barrel Ø 350 x 400 mm.,

    Biel/Bienne, Switzerland
  • Hay grist Schmid and Mägert

    Hay grist Schmid and Mägert

    • Manufacturer: Schmid

    Hay grinder S+M (Schmid+Mägert) L-230: 230 Volt, cutting depth 60 cm, cutting height 50 cm, weight 15 kg, with cable retraction reel with 10 meters, cable to pull out and 10 meters cable for the supply line. Good...

    $1,859 USD
    Madiswil, Switzerland
  • Diamatic stone cutting machine A-36

    Diamatic stone cutting machine A-36

      Diamatic stone cutting machine A-36 incl. diamond cutting disk 350 mm Max. Speed 2800 rpm Motor 2200 W, 230 V incl. mobile base

      $1,516 USD
      Aarwangen, Switzerland
    • Chipper blower Gehl 99

      Chipper blower Gehl 99

      • Manufacturer: Gehl

      Possible ex place or ex service

      Rubigen, Switzerland
    • no-image_en.png

      1995 Tecno Filter TF 1200 40 / 50

      • Manufacturer: Tecno Filter

      $21,530 USD
      Eriswil, Switzerland
    • no-image_en.png

      1995 ECOFANGHI filter

      • Manufacturer: ECOFANGHI

      $2,182 USD
      Eriswil, Switzerland
    • MASTERIA refrigeration dryer MPE 015

      MASTERIA refrigeration dryer MPE 015 C

        MASTERIA refrigeration dryer MPE 015 C 230 V up to 16 bar Compressed air volume 115 m3 /h dimensions: 58 x 58 x 70 cm Weight approx. 83 kg

        $1,238 USD
        Aarwangen, Switzerland
      • Leaf vacuum cleaner Peruzzo

        Leaf vacuum cleaner Peruzzo

        • Manufacturer: Peruzzo

        Suction tube made of polyurethane, length 5.0 meters - front with steel guide tube - on two wheels, three-point linkage Cat. I, with PTO shaft, weight approx. 175 kg, required tractor power - from 16 hp, inside w...

        $5,070 USD
        Madiswil, Switzerland
      1011121314

      Overview

      Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

      FAQ

      What should I consider when buying used processing equipment?

      Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

      How do I arrange shipping for processing equipment?

      Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

      What is the typical maintenance for processing equipment?

      Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.