Used frames in Bremen, Germany

580 L stainless steel transport box AISI304 (1,2 x 0,8 x 1,0 m)

remarks: lid can be opened; inner height: approx. 750 mm; opening that cannot be completely closed and 4 open slots on the inside (goes into the lower part of the frame; see photos)

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

324 liter pressure tank, Aisi 316

• Manufacturer: Diessel

max. allowable working temperature: 134 °C remarks: Tank hanging on 3 "feet" in frame or ceiling; Hand hole diameter approx. 300 mm; Outlet fitting is missing

1000 liter conical container Bohle MC 1000, Aisi 304

• Manufacturer: LB Bohle

remarks: Container stands loose in a 4-foot frame, Aisin 304; cone height approx. 600 mm; manhole diameter approx. 620 mm; container with smaller dents

11100 liter storage tank, AISI316

• Manufacturer: Gross Apparatebau

remarks: Built according to DIN6618; pipelines inside the tanks; stand frame, 1.4301 (Aisi 304); manhole cover, 1.4541 (Aisi 304); Outlet with screwed reduction

1500 liter bulk container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame made of AISI304/316; Manhole diameter approx. 455 mm; At the end of the cone there is 1 opening with a diameter of approx. 600 mm (closure for this opening is missing)

500 liter IBC container, Aisi 316

• Manufacturer: Blefa

remarks: Frame made of Fe (galvanised); slight differences in design, e.g. outlet; manhole cover missing on one container; manhole fastening screws partially incomplete; outlet valve defective on both containers;

1027 liter pressure tank, Aisi 304

remarks: Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank

850 liter insulated agitator tank, Aisi 304 with propeller agitator

notice: some residues of previous content, bump at the insulation jacket remarks: Tank on frame rest made of Fe; Fastening of the manhole cover incomplete agitator features: Agitator motor with signs of corrosion...

4000 liter horizontal storage tank with 2 mounted cross blade stirrers, Aisi 304

notice: some residues of previous content, manhole cover is missing remarks: bearer frame made of Fe; insulation jacket with dents and extensively nonexistent; manhole appr. 300 x 400 mm in one of the bottoms

1255 liter container, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective)

180 liter mobile bulk tank, Aisi 304

remarks: Cone height appr. 450 mm; Tanks hang loosely in mobile frame, Aisi 304 with 6 plastic rollers; lid can be attached with 2 hooks each (see photos); 1 tank with dents

1000 Liter Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); diameter of manhole approx. 420 mm; 1 container with slight differences in design; this container has dents in the lower part of the container (see photos); last medium for this c...

270 liter heat-/coolable agitator tank, Aisi 304 with anchor agitator

Temperature control cylinder (dj): double jacket remarks: Double jacket for heating and cooling made of Fe; Full pipe coil for heating/cooling made of Aisi 304; Stand frame made of Fe

1000 Liter Container, Aisi 316

• Manufacturer: Gempp & Unold AG

remarks: Frame, Fe (galvanized; slight signs of corrosion); diameter of manhole approx. 415 mm; screwed screw holder made of Fe (galvanized) outside around the manhole collar; dents in the lower bottom