Building Filters
- Trusted Seller

Washer, Rotary, Photomeca, Mdl Washflex 912, S/st, 220V #S739982
- Manufacturer: Photomeca
Photomeca washer, stainless steel contacts, carbon steel frame. Unit is size 35.4" x 47.2", model Washflex 912, rotary washout, use Solvheatz@ solvent heater internal, Solvheatz3 solvent heater external. Unit des...
San Dimas, CA - Trusted Seller

Separator, Cyclone, 17" x 20", S/st, Air, 45 Deg Cone #S740133
- Manufacturer: Other
Cyclone Air Separator with Stainless Steel Contact Parts - Features a 17" diameter x 20" straight side and cone bottom with 6" x 6" discharge. Includes a 6" air inlet and 8" top outlet.
San Dimas, CA 
2515B-75 Welch WOB-L® Dry Vacuum Cell Culture Aspiration Station 115Volts
- Manufacturer: Welch
$2,000 USDYorba Linda, CA
2515C-75 Welch WOB-L® Dry Vacuum Cell Culture Aspiration Station 230Volts w/CE Mark
- Manufacturer: Welch
$2,000 USDYorba Linda, CA
IMA Empty Capsule Separator
- Manufacturer: IMA
1-Used IMA Empty Capsule Separator Model DS-71 Sn 41F39 YR 2003 V220 ~2 Hz50/60 A04 Ka 1.5 IMA Empty Capsule Separator
City of Industry, CA- Trusted Seller

Hopper, 22" x 25", Alum, 23" Cone Bottom #S740137
Aluminum Hopper for Sweco Sifter - Measures 22" diameter x 25" straight side with a 23" cone bottom. Equipped with a 6.5" top inlet and a 3" side bottom outlet.
San Dimas, CA - Trusted Seller

Mill, Disc Pulverizer, 8", Morse, Mdl DG-154, C/st, 2 HP #C741790
- Manufacturer: Morse Brothers
Morse Bros Machinery Disc Pulverizer, Model DF-154 - All-carbon steel build with an 8" diameter disc. Driven by a 2 HP, 115/230V, 1750 RPM motor. Features a 3.5" x 2" inlet.
San Dimas, CA 
GEM Equip Continuous Potato Frying & National Drying System
- Manufacturer: GEM Equipment
(1) ONE NATIONAL APRON DRYER: MFG: 2008 Belt measures 8' wide X 45' long, multi stage design. First two passes heat product (2-zone forced air dryer) and final pass acts as equilibration/tempering zone. Dryer ...
California, USA- Trusted Seller

Feeder, Screw, 3" Diameter x 24" Long, Stainless Steel, 1 HP, (2) #5991636
(2) Stainless Steel Metering screw feeders, featuring a 3" diameter x 24" long screw enclosed in a 30" x 30" x 22" stainless steel hopper. Driven by a Toshiba 1 HP, 460V, 1735 RPM, 3-phase, 60 Hz motor through a ...
San Dimas, CA - Trusted Seller

Mill, Mikro, 2TH, C/st, 20 HP, #S736455
- Manufacturer: Mikro Corporation
Mikro Pulverizer model 2TH with 2 wide stirrup hammers. Unit is carbon steel contact parts, rated to 4500 RPM. Unit is complete with triple screw feeder with fractional HP motor drive. Mill has 20 HP, 220/440 vol...
San Dimas, CA - Trusted Seller

Mill, Entoleter, C/st, 10 HP, 220/440, Less Hopper Feed, #Z469300
- Manufacturer: Entoleter
Entoleter Mill - Model FTM. Constructed from carbon steel with a 10 HP motor (220/440V), less hopper feed. Includes a 14" diameter milling rotor. Serial number unavailable.
San Dimas, CA - Trusted Seller

Mezzanine, 96" x 48" x 65", 6-Step, S/st, Platform #S742821
Stationary stainless steel Work Platform, 96" long x 48" wide x 65" high, stands on six 2" square tubing legs with diamond plate deck, all stainless. Unit includes 6-step stairwell with 20" wide x 12" deep plasti...
San Dimas, CA 
Heat Tunnel
Used Heat Tunnel, Model: SM-1230 Serial: 2013070587 Power Voltage: 220V, 3PH Amps: 40 RPM: 2750-3305
Los Angeles, CA
IMA 40E Automatic Encapsulator
- Manufacturer: IMA
Zanasi 40E automatic encapsulator, speeds up to 40,000 capsules per hour, Tooling Sets size 00, 0 ,1 & 2 For Liquid Powder and Beads used for liquid & powders
Los Angeles, CA
Steel King Waterfall Pallet Support, 11 skids
- Manufacturer: King
Steel King Waterfall Pallet Support: 2 7/8" x 36" x 1 1/2", Steel, Zinc Plated , Gray. Crossbars install front-to-back onto pallet rack beams to brace the beams and provide support for loads placed on the beams....
Los Angeles, CA
