Used loading in Canada

56" x 60" Gruendler Hammer Hog

• Manufacturer: Gruendler

- Opening is 56" wide x 60" long - 900 HP @ 2300 Volt, 3 phase, 60 hertz - Twenty (20) hammers, weight approx. 190 lbs each - c/w spare hammers and grates - Loaded on a truck

84" SWING SAW - TWO (2) AVAILABLE

• Manufacturer: Canadian Mill Equipment

- 84" swing saw c/w 100 HP drive motor, 460/3/60 - Fabricated support frame - Hydraulic cylinder activated (no HPU) - Two (2) saw blades - Dismantled ready to load

2007 36" 1400psi Sweet Vertical Separator

• Manufacturer: SILVERADO

36" 1400 PSI Sweet Vertical Separator – Silverado (2007)This unit is a 36" OD × 10 ft vertical sweet service separator, designed for 1400 psig MAWP, supplied as a complete separator package (not vessel-only) and ...

Large Blower

- Shroud is 102" diameter x 28" wide - Fan is 61" diameter x 20" wide - Was run by a 150 HP motor (not included) - Needs paint job but mechanically sound - Located on West Coast of BC - Ready to load

GREAT LAKES PSA TYPE NITROGEN GENERATOR

• Manufacturer: Great Lakes

Great Lakes Model GN2-650-B12-XPO PSA type nitrogen generator Maximum Pressure: 150 PSI Maximum Inlet Temperature: 100 degrees F Maximum Inlet Dewpoint: 39 degrees F PDP Nominal Capacity: 810 SCFH @ 99.99% purity...

2009 BRETON NC260 CNC WORK CENTER [SN-011808]

• Manufacturer: Breton
• Model: NC260

2006 BRETON - Contour NC 260: CNC Machining Center 3-Axis multifunctional Work Center for: Carving, milling, drilling, grinding, polishing, profiling, inlaying, aging, etc. Complete with: -- Automatic tool change...

Kewanee Chip Trailer Dump

• Manufacturer: Kewanee

- 1989 model - 75 ft long deck - Chip pit - Chip conveyor, four (4) strand WD120 chain c/w 100 HP electric drive (approx 50' long) Holds 1 to 1-1/2 truck loads

2007 LISEC COMPLETE INSULATED GLASS LINE [GM-011107]

• Manufacturer: LiSEC

LISEC LV-25/20 VSA Automated Insulating Glass Line With SUPER SPACER - 2000 X 2500 mm Insulating Glass line for assembly of double or triple insulating glass units. The loading zone at the inlet is designed to fe...

New Signode TTX Strapping Machine

• Manufacturer: Signode

New Signode TTX Strapping Machine The Signode TTX is a brand new, automatic strapping machine engineered for high-speed, reliable strapping of cartons, bundles, and pallet loads. Designed for performance, precis...

Outfeed Belt Conveyor c/w Kickers

- Approximately 6' long - 24" wide belt c/w head and tail pulleys - Three (3) kicker assemblies c/w hydraulic cylinders - 75 HP electric/motor reducer drive - No hydraulic power unit - Dismantled and ready to load

2025 70 hp 62 gpm Axial Piston HPU Pump Package (Natural Gas)

New Tandem Pump Hydraulic Power Unit (HPU) Specifications Building Features: • 10 x 12 Utilidor building • 1 man-door with window • Fresh air louver inlet • 24" LED light bar on timer Engine and Control System: •...

Used Dilute Phase Vacuum Conveying System

· One (1) vacuum filter/receiver with the following features: · Type 304 stainless steel construction · Nominally 38” Diameter x 7’-6-1/2” overall height · Seven (7) 8” Diameter x 36” long filter cartridges wi...

2007 HUSSMANN HAV05SK-LTLTLTLULU

• Manufacturer: HUSSMANN

Compressor Loads: Comp1 23.9 Comp2 23.9 Comp3 23.9 Comp4 19.3 Comp5 19.3 Minimum Design Pressure:

2007 HUSSMANN HAV06SK-HGHGHGHGHGHG

• Manufacturer: HUSSMANN

Compressor Loads: Comp1 23.9 Comp2 23.9 Comp3 23.9 Comp4 19.3 Comp5 19.3 Minimum Design Pressure: