Processing » Canada

Building Filters

57

Used beam processing in Canada

  • Trusted Seller
    7 ft x 5.5 ft

    7 ft x 5.5 ft Ball Mill

      7 ft. diameter. 5.5 ft. long. Scoop feed. 18 in. diameter overflow discharge. Straight cut bull and pinion gear 8 in. wide Babbitt bearings. Belt driven by a 100 HP motor . 208-230/460V. 1200 rpm. 3 phase. 10 in....

      Savona, Canada
    • Trusted Seller
      Eimco 24 ft. Thickener

      Eimco 24 ft. Thickener

      • Manufacturer: Eimco

      10ft Deep 24ft Diameter 9ft 3in Discharge Height 4ft Head Full bridge 12in Wide External Launder 48" Dia. Drive Head 5 HP Motor 575 volt, 3 phase, 60Hz Main shaft, rakes & discharge cone Flat bottom floor ¼” (6.3...

      Savona, Canada
    • Trusted Seller
      Ty-Rock F-800 2-Deck Screen

      Ty-Rock F-800 2-Deck Screen

      • Manufacturer: WS Tyler - Ty-Rock

      6.5ft Wide x 6ft Long Feed Chute Heavy Duty Hinge Adjustable During Operation Collapsible For Transport Top Deck: 6ft Long Grizzly Section with 7.5in Spacing Balance of Deck is Blank with Diverter Bar so All Mate...

      Savona, Canada
    • Trusted Seller
      2022 Astec 33-36130

      2022 Astec 33-36130

      • Manufacturer: Astec

      Conveyor - Main conveyor 30” x 80’ [762mm x 24.4m]; 70” [1,778mm] deep frame - Stinger Conveyor 30” x 74’ [762mm x 22.6m]; 54” [1,371mm] deep frame - Extension – conveyor extends from 80’ [24.4m] to 150’ [45.7m] ...

      Chilliwack, Canada
    • Trusted Seller
      no-image_en.png

      Lamsor 920 Moisture System

      • Manufacturer: Lamsor

      - Lamsor 920 is a fully automated, non-contact moisture sensor to be used by the lumber industry for in-line applications. Lamsor 920 uses a laser beam as the moisture sensing probe. Information about the analyze...

      Surrey, Canada
    • Trusted Seller
      Powder Coating Line, up to

      Powder Coating Line, up to 8 meter or 27 foot part length

        Excellent well functioning line installed with all of the manufacturers bolted modular components. Current estimated replacement cost from Italy, same capacity - $10,000,000 Euros! NOTE: This Line is now powered ...

        Montreal, Canada
      • Trusted Seller
        Benchmark LPB Roller Chain Conveyor

        Benchmark LPB Roller Chain Conveyor

        • Manufacturer: Benchmark

        Modular roller chain belt: 118″L x 7.5″W, work height: 30″ Each roller chain section: 2″L x 7.5″W Includes a SICK WTB12 photo-electric proximity sensor, as well as a Banner QS12 Mini-Beam2 receiver. Powered by a ...

        Abbotsford, Canada
      • Trusted Seller
        300 Gallon Hopper With Load

        300 Gallon Hopper With Load Cells

          Hopper Straight side: 26″, diameter: 48″, cone: 35″ deep Volume: 300 gallons Infeed: 13″ diameter Discharge valve: 10″ diameter Triac 2R2200DA Double Acting Rack & Pinion Actuator Controls the discharge valve Ric...

          Abbotsford, Canada
        • Trusted Seller
          Mespack H-260 SC FFS Machine

          Mespack H-260 SC FFS Machine

          • Manufacturer: Mespack

          Mespack H-260 SC FFS Machine The H-260 SC machine is formed by a pouch feeding conveyor in one or two lanes, a pick and place to transfer the pre-made pouches to a walking beam system and the main module where t...

          Abbotsford, Canada
        • FOX Semi-Automatic High Profile Stretch

          FOX Semi-Automatic High Profile Stretch Wrapper (Re-manufactured)

            The Fox FPS400H Semi-Automatic High Profile Stretch Wrapper is a high profile stretch wrapper that can wrap up to 40 loads per hour. It can handle pallets that weigh under 5000 pounds, and measure 55" wide, by 55...

            Vaughan, Canada
          • GAS COMPRESSOR FOR PRODUCTION OPTIMIZATION

            GAS COMPRESSOR FOR PRODUCTION OPTIMIZATION

              The main function of the Beam Mounted gas Compressor (B.M.G.C.) single acting or double acting is to draw gas from the casing side of the well and to discharge the gas into the flow line. By doing so, the B.M.G.C...

              Drayton Valley, Canada
            • 2019 McCloskey 130' Telescoping

              2019 McCloskey 130' Telescoping

              • Manufacturer: Mccloskey

              1 Used 2019 McCloskey SDX 130' Telescopic Conveyor CAT Tier 4F 130 Hp Engine Approximately 1900 Hours Standard Feedboot Pivot Point Hydraulic Axle Jacks Hydraulic Wheel Drive Remote Grease Lines Walking Beam...

              Crossfield, Canada
            1234

            Overview

            Processing equipment encompasses a wide range of machinery used in various industries to transform raw materials into finished products. This category includes machines like grinders, mixers, blenders, and specialized equipment for food, chemical, pharmaceutical, and other manufacturing processes. These machines are essential for improving efficiency, consistency, and quality in production lines.

            FAQ

            What should I consider when buying used processing equipment?

            Consider the machine's condition, age, maintenance history, and whether it meets your specific processing requirements. It's also important to check for any signs of wear and ensure compatibility with your existing systems.

            How do I arrange shipping for processing equipment?

            Use a reliable transport service experienced in handling industrial machinery. Ensure the equipment is properly cleaned, secured, and protected during transit to avoid any damage.

            What is the typical maintenance for processing equipment?

            Regular maintenance includes cleaning, lubrication, inspection for wear and tear, and calibration. Follow the manufacturer's guidelines for specific maintenance schedules and procedures to ensure optimal performance and longevity.